Re: [PATCH RFC v2 2/6] media: v4l2-ctrls: clarify documentation of V4L2_CID_FOCUS_RELATIVE

[Sakari Ailus]

Hi Laurent,

On Wed, Jun 07, 2023 at 09:55:20AM +0300, Laurent Pinchart wrote:
> On Wed, Jun 07, 2023 at 09:42:07AM +0300, Laurent Pinchart wrote:
> > On Tue, Jun 06, 2023 at 03:15:33PM +0200, Michael Riesch wrote:
> > > On 6/6/23 12:36, Laurent Pinchart wrote:
> > > > On Tue, Apr 25, 2023 at 11:45:12AM +0200, Michael Riesch wrote:
> > > >> The control V4L2_CID_FOCUS_RELATIVE only makes sense if the device cannot
> > > >> handle absolute focal point positioning with V4L2_CID_FOCUS_ABSOLUTE.
> > > >> Clarify this in the documentation.
> > > >>
> > > >> Signed-off-by: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
> > > >> ---
> > > >>  Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst | 4 +++-
> > > >>  1 file changed, 3 insertions(+), 1 deletion(-)
> > > >>
> > > >> diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst
> > > >> index df29150dce7b..42cf4c3cda0c 100644
> > > >> --- a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst
> > > >> +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst
> > > >> @@ -147,7 +147,9 @@ enum v4l2_exposure_metering -
> > > >>      This control moves the focal point of the camera by the specified
> > > >>      amount. The unit is undefined. Positive values move the focus closer
> > > >>      to the camera, negative values towards infinity. This is a
> > > >> -    write-only control.
> > > >> +    write-only control. It should be implemented only if the device cannot
> > > >> +    handle absolute values.
> > > >> +
> > > > 
> > > > Extra blank line.
> > > 
> > > Will fix that.
> > > 
> > > > I don't think this is right. The control was added for the UVC driver,
> > > > and there are devices that implement both absolute and relative focus.
> > > 
> > > I am by no means an expert here and just following Sakari's suggestion
> > > here (see [0]). I can drop the patch, leave it as-is, or modify it.
> > > Whatever makes sense to you guys. But maybe I should leave this to
> > > someone more knowledgeable in this area and drop the patch from my
> > > series. The changes above are completely orthogonal to my work.
> > 
> > V4L2_CID_FOCUS_RELATIVE is an annoying control. It was introduced for
> > UVC, and to my surprise, it turns out it has never been implemented in
> > the uvcvideo driver. The 3 devices I know of that implement the UVC
> > relative focus control also implement the UVC absolute focus control.
> > 
> > I'm tempted to deprecate this control completely. Sakari, any opinion ?
> 
> This is how the UVC relative focus control is defined.
> 
>   4.2.2.1.7 Focus (Relative) Control
> 
>   The Focus (Relative) Control is used to move the focus lens group to
>   specify the distance to the optimally focused target.
> 
>   The bFocusRelative field indicates whether the focus lens group is
>   stopped or is moving for near or for infinity direction. A value of 1
>   indicates that the focus lens group is moved for near direction. A
>   value of 0 indicates that the focus lens group is stopped. And a value
>   of 0xFF indicates that the lens group is moved for infinity direction.
>   The GET_MIN, GET_MAX, GET_RES and GET_DEF requests will return zero
>   for this field.
> 
>   The bSpeed field indicates the speed of the lens group movement. A low
>   number indicates a slow speed and a high number indicates a high
>   speed. The GET_MIN, GET_MAX and GET_RES requests are used to retrieve
>   the range and resolution for this field. The GET_DEF request is used
>   to retrieve the default value for this field. If the control does not
>   support speed control, it will return the value 1 in this field for
>   all these requests.
> 
>   If both Relative and Absolute Controls are supported, a SET_CUR to the
>   Relative Control with a value other than 0x00 shall result in a
>   Control Change interrupt for the Absolute Control at the end of the
>   movement (see section 2.4.2.2, “Status Interrupt Endpoint”). The end
>   of movement can be due to physical device limits, or due to an
>   explicit request by the host to stop the movement. If the end of
>   movement is due to physical device limits (such as a limit in range of
>   motion), a Control Change interrupt shall be generated for this
>   Relative Control. If there is no limit in range of motion, a Control
>   Change interrupt is not required.
> 
> It seems there's no way we can just map this to V4L2_CID_FOCUS_RELATIVE,
> making the V4L2 relative focus control quite useless.

I'd deprecate this control as it doesn't have any use.

The control documentation + other references in V4L2 control framework
could be even removed but the control ID definition needs to stay as user
space may refer to it.

-- 
Regards,

Sakari Ailus