[PATCH v3 0/6] clk: qcom: sc8280xp: add lpasscc reset control

[Srinivas Kandagatla]

On SC8280XP, LPASS IP is controlled by q6dsp, however the reset lines
required by some of the IPs like Soundwire still need to be programmed from
Apps processor. This patchset adds support to reset controller on LPASS
CC and LPASS AudioCC.

Tested on X13s.

Thanks,
Srini

Changes since v2:
	- removed qcom,adsp-pil-mode bindings, can be added when
	 we have a variant of this SoC without dsp control
	- added compile check in Kconfig
	- fix variable naming to reflect correct cc.
	- few minor style related changes

Srinivas Kandagatla (6):
  dt-bindings: clock: Add LPASSCC and reset controller for SC8280XP
  dt-bindings: clock: Add LPASS AUDIOCC and reset controller for
    SC8280XP
  clk: qcom: Add lpass clock controller driver for SC8280XP
  clk: qcom: Add lpass audio clock controller driver for SC8280XP
  arm64: dts: qcom: sc8280xp: add resets for soundwire controllers
  arm64: defconfig: Enable sc828x0xp lpasscc clock controller

 .../bindings/clock/qcom,sc8280xp-lpasscc.yaml | 60 +++++++++++++
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi        | 21 +++++
 arch/arm64/configs/defconfig                  |  1 +
 drivers/clk/qcom/Kconfig                      |  9 ++
 drivers/clk/qcom/Makefile                     |  1 +
 drivers/clk/qcom/lpasscc-sc8280xp.c           | 87 +++++++++++++++++++
 .../dt-bindings/clock/qcom,sc8280xp-lpasscc.h | 17 ++++
 7 files changed, 196 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml
 create mode 100644 drivers/clk/qcom/lpasscc-sc8280xp.c
 create mode 100644 include/dt-bindings/clock/qcom,sc8280xp-lpasscc.h

-- 
2.25.1