Re: [PATCH] scsi: sd: support specify probe type of build-in driver

[Bart Van Assche]

On 6/7/23 08:55, Jianlin Lv wrote:
> 1. MegaRAID adapters associated with 24 local disks. The disks are named
> sequentially as "sda," "sdb," and so on, up to "sdx."
> 2. STAT controllers associated with the root disk, named "sdy."
>
> Both the MegaRAID adapters and the SATA controller (PCH) are accessed via
> the PCIe bus. In theory, depending on their PCIe bus ID in ascending order,
> the devices should be initialized in ascending order as well.

Hmm ... I don't think there is anything that prevents the PCIe maintainer
from changing the PCIe probing behavior from synchronous to asynchronous?
In other words, I don't think it is safe to assume that PCIe devices are
always scanned in the same order.

> For cloud deployment, the local volume provisioner detects and creates PVs
> for each local disk (from sda to sdx) on the host, and it cleans up the
> disks when they are released.
> This requires the logical names of the disks to be deterministic.

I see two possible solutions:
- Change the volume provisioner such that it uses disk references that do
  not depend on the probing order, e.g. /dev/disk/by-id/...
- Implement an algorithm in systemd that makes disk names predictable.
  An explanation of how predictable names work for network interfaces is
  available here: https://wiki.debian.org/NetworkInterfaceNames. The
  systemd documentation about predictable network names is available here:
  https://www.freedesktop.org/software/systemd/man/systemd.net-naming-scheme.html

These alternatives have the advantage that disk scanning remains asynchronous.

Thanks,

Bart.