Re: [PATCH v2 06/10] arm64: dts: qcom: Add SDX75 platform and IDP board support

From: Konrad Dybcio
Date: Tue Jun 06 2023 - 05:37:07 EST




On 6.06.2023 10:04, Rohit Agarwal wrote:
>
> On 6/5/2023 11:45 PM, Konrad Dybcio wrote:
>>
>> On 5.06.2023 18:29, Rohit Agarwal wrote:
>>> Add basic devicetree support for SDX75 platform and IDP board from
>>> Qualcomm. The SDX75 platform features an ARM Cortex A55 CPU which forms
>>> the Application Processor Sub System (APSS) along with standard Qualcomm
>>> peripherals like GCC, TLMM, UART, QPIC, and BAM etc... Also, there
>>> exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
>>> etc..
>>>
>>> This commit adds basic devicetree support.
>> You just said that in the first sentence! :P
> Sorry :')
>>
>>> Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
>>> ---
>>>   arch/arm64/boot/dts/qcom/Makefile      |   1 +
>>>   arch/arm64/boot/dts/qcom/sdx75-idp.dts |  18 ++
>>>   arch/arm64/boot/dts/qcom/sdx75.dtsi    | 533 +++++++++++++++++++++++++++++++++
>>>   3 files changed, 552 insertions(+)
>>>   create mode 100644 arch/arm64/boot/dts/qcom/sdx75-idp.dts
>>>   create mode 100644 arch/arm64/boot/dts/qcom/sdx75.dtsi
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>>> index d42c595..4fd5a18 100644
>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>> @@ -173,6 +173,7 @@ dtb-$(CONFIG_ARCH_QCOM)    += sdm845-xiaomi-polaris.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)    += sdm845-shift-axolotl.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)    += sdm850-lenovo-yoga-c630.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)    += sdm850-samsung-w737.dtb
>>> +dtb-$(CONFIG_ARCH_QCOM)    += sdx75-idp.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)    += sm4250-oneplus-billie2.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)    += sm6115p-lenovo-j606f.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)    += sm6125-sony-xperia-seine-pdx201.dtb
>>> diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
>>> new file mode 100644
>>> index 0000000..1e08f25
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
>>> @@ -0,0 +1,18 @@
>>> +// SPDX-License-Identifier: BSD-3-Clause
>>> +/*
>>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +#include "sdx75.dtsi"
>>> +
>>> +/ {
>>> +    model = "Qualcomm Technologies, Inc. SDX75 IDP";
>>> +    compatible = "qcom,sdx75-idp", "qcom,sdx75";
>>> +
>> Stray newline
>>
>>> +};
>>> +
>>> +&tlmm {
>>> +    gpio-reserved-ranges = <110 6>;
>>> +};
>>> diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi
>>> new file mode 100644
>>> index 0000000..3d1646b
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
>>> @@ -0,0 +1,533 @@
>>> +// SPDX-License-Identifier: BSD-3-Clause
>>> +/*
>>> + * SDX75 SoC device tree source
>>> + *
>>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
>>> + *
>>> + */
>>> +
>>> +#include <dt-bindings/clock/qcom,rpmh.h>
>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
>>> +
>>> +/ {
>>> +    #address-cells = <2>;
>>> +    #size-cells = <2>;
>>> +    interrupt-parent = <&intc>;
>>> +
>>> +    chosen: chosen { };
>>> +
>>> +    memory@80000000 {
>> Please sort the top-level nodes alphabetically
>>
>>> +        device_type = "memory";
>>> +        reg = <0 0x80000000 0 0>;
>> Please use 0x0 for consistency
> Sure, Will make everywhere this as 0x0
>>
>>> +    };
>>> +
>>> +    clocks { };
>>> +
>>> +    cpus {
>>> +        #address-cells = <2>;
>>> +        #size-cells = <0>;
>>> +
>>> +        CPU0: cpu@0 {
>>> +            device_type = "cpu";
>>> +            compatible = "arm,cortex-a55";
>>> +            reg = <0x0 0x0>;
>>> +            enable-method = "psci";
>>> +            power-domains = <&CPU_PD0>;
>>> +            power-domain-names = "psci";
>>> +            next-level-cache = <&L2_0>;
>> Missing newline before subnode
>>
>>> +            L2_0: l2-cache {
>>> +                compatible = "cache";
>>> +                next-level-cache = <&L3_0>;
>>> +                L3_0: l3-cache {
>>> +                    compatible = "cache";
>>> +                };
>>> +            };
>>> +        };
>> [...]
>>
>>> +        CLUSTER_PD: power-domain-cpu-cluster0 {
>>> +            #power-domain-cells = <0>;
>>> +            domain-idle-states = <&CLUSTER_SLEEP_0 &CX_RET &CLUSTER_SLEEP_1>;
>> Shouldn't CX_RET be the last one?
> Here seems to an issue with the naming that I added. CLUSTER_SLEEP_1 should actually be APPS_SLEEP
> which is deeper than CX_RET.
> So will update the names in the next.
Are you sure?

Both the PSCI params and longer latency/residency times suggest
the reverse!

Konrad
>
> Thanks for pointing out.
> Rohit.
>>
>> Konrad
>>> +        };
>>> +    };
>>> +
>>> +    firmware {
>>> +        scm: scm {
>>> +            compatible = "qcom,scm-sdx75", "qcom,scm";
>>> +        };
>>> +    };
>>> +
>>> +    pmu {
>>> +        compatible = "arm,armv8-pmuv3";
>>> +        interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
>>> +    };
>>> +
>>> +    reserved-memory {
>>> +        #address-cells = <2>;
>>> +        #size-cells = <2>;
>>> +        ranges;
>>> +
>>> +        gunyah_hyp_mem: gunyah-hyp@80000000 {
>>> +            reg = <0x0 0x80000000 0x0 0x800000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        hyp_elf_package_mem: hyp-elf-package@80800000 {
>>> +            reg = <0x0 0x80800000 0x0 0x200000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        access_control_db_mem: access-control-db@81380000 {
>>> +            reg = <0x0 0x81380000 0x0 0x80000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        qteetz_mem: qteetz@814e0000 {
>>> +            reg = <0x0 0x814e0000 0x0 0x2a0000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        trusted_apps_mem: trusted-apps@81780000 {
>>> +            reg = <0x0 0x81780000 0x0 0xa00000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        xbl_ramdump_mem: xbl-ramdump@87a00000 {
>>> +            reg = <0x0 0x87a00000 0x0 0x1c0000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        cpucp_fw_mem: cpucp-fw@87c00000 {
>>> +            reg = <0x0 0x87c00000 0x0 0x100000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        xbl_dtlog_mem: xbl-dtlog@87d00000 {
>>> +            reg = <0x0 0x87d00000 0x0 0x40000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        xbl_sc_mem: xbl-sc@87d40000 {
>>> +            reg = <0x0 0x87d40000 0x0 0x40000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        modem_efs_shared_mem: modem-efs-shared@87d80000 {
>>> +            reg = <0x0 0x87d80000 0x0 0x10000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        aop_image_mem: aop-image@87e00000 {
>>> +            reg = <0x0 0x87e00000 0x0 0x20000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        smem_mem: smem@87e20000 {
>>> +            reg = <0x0 0x87e20000 0x0 0xc0000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        aop_cmd_db_mem: aop-cmd-db@87ee0000 {
>>> +            compatible = "qcom,cmd-db";
>>> +            reg = <0x0 0x87ee0000 0x0 0x20000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        aop_config_mem: aop-config@87f00000 {
>>> +            reg = <0x0 0x87f00000 0x0 0x20000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        ipa_fw_mem: ipa-fw@87f20000 {
>>> +            reg = <0x0 0x87f20000 0x0 0x10000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        secdata_mem: secdata@87f30000 {
>>> +            reg = <0x0 0x87f30000 0x0 0x1000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        tme_crashdump_mem: tme-crashdump@87f31000 {
>>> +            reg = <0x0 0x87f31000 0x0 0x40000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        tme_log_mem: tme-log@87f71000 {
>>> +            reg = <0x0 0x87f71000 0x0 0x4000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        uefi_log_mem: uefi-log@87f75000 {
>>> +            reg = <0x0 0x87f75000 0x0 0x10000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        qdss_mem: qdss@88800000 {
>>> +            reg = <0x0 0x88800000 0x0 0x300000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        audio_heap_mem: audio-heap@88b00000 {
>>> +            compatible = "shared-dma-pool";
>>> +            reg = <0x0 0x88b00000 0x0 0x400000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        mpss_dsmharq_mem: mpss-dsmharq@88f00000 {
>>> +            reg = <0x0 0x88f00000 0x0 0x5080000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        q6_mpss_dtb_mem: q6-mpss-dtb@8df80000 {
>>> +            reg = <0x0 0x8df80000 0x0 0x80000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        mpssadsp_mem: mpssadsp@8e000000 {
>>> +            reg = <0x0 0x8e000000 0x0 0xf400000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        gunyah_trace_buffer_mem: gunyah-trace-buffer@bdb00000 {
>>> +            reg = <0x0 0xbdb00000 0x0 0x2000000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        smmu_debug_buf_mem: smmu-debug-buf@bfb00000 {
>>> +            reg = <0x0 0xbfb00000 0x0 0x100000>;
>>> +            no-map;
>>> +        };
>>> +
>>> +        hyp_smmu_s2_pt_mem: hyp-smmu-s2-pt@bfc00000 {
>>> +            reg = <0x0 0xbfc00000 0x0 0x400000>;
>>> +            no-map;
>>> +        };
>>> +    };
>>> +
>>> +    smem: qcom,smem {
>>> +        compatible = "qcom,smem";
>>> +        memory-region = <&smem_mem>;
>>> +        hwlocks = <&tcsr_mutex 3>;
>>> +    };
>>> +
>>> +    soc: soc {
>>> +        compatible = "simple-bus";
>>> +        #address-cells = <2>;
>>> +        #size-cells = <2>;
>>> +        ranges = <0 0 0 0 0x10 0>;
>>> +        dma-ranges = <0 0 0 0 0x10 0>;
>>> +
>>> +        tcsr_mutex: hwlock@1f40000 {
>>> +            compatible = "qcom,tcsr-mutex";
>>> +            reg = <0x0 0x01f40000 0x0 0x40000>;
>>> +            #hwlock-cells = <1>;
>>> +        };
>>> +
>>> +        pdc: interrupt-controller@b220000 {
>>> +            compatible = "qcom,sdx75-pdc", "qcom,pdc";
>>> +            reg = <0x0 0xb220000 0x0 0x30000>,
>>> +                  <0x0 0x174000f0 0x0 0x64>;
>>> +            qcom,pdc-ranges = <0 147 52>,
>>> +                      <52 266 32>,
>>> +                      <84 500 59>;
>>> +            #interrupt-cells = <2>;
>>> +            interrupt-parent = <&intc>;
>>> +            interrupt-controller;
>>> +        };
>>> +
>>> +        tlmm: pinctrl@f000000 {
>>> +            compatible = "qcom,sdx75-tlmm";
>>> +            reg = <0x0 0x0f000000 0x0 0x400000>;
>>> +            interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
>>> +            gpio-controller;
>>> +            #gpio-cells = <2>;
>>> +            gpio-ranges = <&tlmm 0 0 133>;
>>> +            interrupt-controller;
>>> +            #interrupt-cells = <2>;
>>> +            wakeup-parent = <&pdc>;
>>> +        };
>>> +
>>> +        apps_smmu: iommu@15000000 {
>>> +            compatible = "qcom,sdx75-smmu-500", "arm,mmu-500";
>>> +            reg = <0x0 0x15000000 0x0 0x40000>;
>>> +            #iommu-cells = <2>;
>>> +            #global-interrupts = <2>;
>>> +            dma-coherent;
>>> +            interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
>>> +        };
>>> +
>>> +        intc: interrupt-controller@17200000 {
>>> +            compatible = "arm,gic-v3";
>>> +            #interrupt-cells = <3>;
>>> +            interrupt-controller;
>>> +            #redistributor-regions = <1>;
>>> +            redistributor-stride = <0x0 0x20000>;
>>> +            reg = <0x0 0x17200000 0x0 0x10000>,
>>> +                  <0x0 0x17260000 0x0 0x80000>;
>>> +            interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
>>> +        };
>>> +
>>> +        timer@17420000 {
>>> +            compatible = "arm,armv7-timer-mem";
>>> +            reg = <0x0 0x17420000 0x0 0x1000>;
>>> +            #address-cells = <1>;
>>> +            #size-cells = <1>;
>>> +            ranges = <0 0 0 0x20000000>;
>>> +
>>> +            frame@17421000 {
>>> +                reg = <0x17421000 0x1000>,
>>> +                      <0x17422000 0x1000>;
>>> +                frame-number = <0>;
>>> +                interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>>> +                         <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
>>> +            };
>>> +
>>> +            frame@17423000 {
>>> +                reg = <0x17423000 0x1000>;
>>> +                frame-number = <1>;
>>> +                interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>>> +                status = "disabled";
>>> +            };
>>> +
>>> +            frame@17425000 {
>>> +                reg = <0x17425000 0x1000>;
>>> +                frame-number = <2>;
>>> +                interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>>> +                status = "disabled";
>>> +            };
>>> +
>>> +            frame@17427000 {
>>> +                reg = <0x17427000 0x1000>;
>>> +                frame-number = <3>;
>>> +                interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>>> +                status = "disabled";
>>> +            };
>>> +
>>> +            frame@17429000 {
>>> +                reg = <0x17429000 0x1000>;
>>> +                frame-number = <4>;
>>> +                interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>>> +                status = "disabled";
>>> +            };
>>> +
>>> +            frame@1742b000 {
>>> +                reg = <0x1742b000 0x1000>;
>>> +                frame-number = <5>;
>>> +                interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>>> +                status = "disabled";
>>> +            };
>>> +
>>> +            frame@1742d000 {
>>> +                reg = <0x1742d000 0x1000>;
>>> +                frame-number = <6>;
>>> +                interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>>> +                status = "disabled";
>>> +            };
>>> +        };
>>> +
>>> +        apps_rsc: rsc@17a00000 {
>>> +            label = "apps_rsc";
>>> +            compatible = "qcom,rpmh-rsc";
>>> +            reg = <0x0 0x17a00000 0x0 0x10000>,
>>> +                  <0x0 0x17a10000 0x0 0x10000>,
>>> +                  <0x0 0x17a20000 0x0 0x10000>;
>>> +            reg-names = "drv-0", "drv-1", "drv-2";
>>> +            interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
>>> +
>>> +            power-domains = <&CLUSTER_PD>;
>>> +            qcom,tcs-offset = <0xd00>;
>>> +            qcom,drv-id = <2>;
>>> +            qcom,tcs-config = <ACTIVE_TCS    3>,
>>> +                      <SLEEP_TCS     2>,
>>> +                      <WAKE_TCS      2>,
>>> +                      <CONTROL_TCS   0>;
>>> +
>>> +            apps_bcm_voter: bcm_voter {
>>> +                compatible = "qcom,bcm-voter";
>>> +            };
>>> +        };
>>> +    };
>>> +
>>> +    timer {
>>> +        compatible = "arm,armv8-timer";
>>> +        interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>> +                 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>> +                 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>> +                 <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>>> +    };
>>> +};