Re: [PATCH net-next v2 1/2] net: phy: micrel: Move KSZ9477 errata fixes to PHY driver

[Florian Fainelli]

On 6/5/23 08:39, Robert Hancock wrote:
> The ksz9477 DSA switch driver is currently updating some MMD registers
> on the internal port PHYs to address some chip errata. However, these
> errata are really a property of the PHY itself, not the switch they are
> part of, so this is kind of a layering violation. It makes more sense for
> these writes to be done inside the driver which binds to the PHY and not
> the driver for the containing device.
>
> This also addresses some issues where the ordering of when these writes
> are done may have been incorrect, causing the link to erratically fail to
> come up at the proper speed or at all. Doing this in the PHY driver
> during config_init ensures that they happen before anything else tries to
> change the state of the PHY on the port.
>
> The new code also ensures that autonegotiation is disabled during the
> register writes and re-enabled afterwards, as indicated by the latest
> version of the errata documentation from Microchip.
>
> Signed-off-by: Robert Hancock <robert.hancock@xxxxxxxxxx>
> Reviewed-by: Andrew Lunn <andrew@xxxxxxx>

Reviewed-by: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
--
Florian