Re: [PATCH 1/2] arm64: dts: imx8mn-beacon: Add HDMI video with sound

[Shawn Guo]

On Wed, May 31, 2023 at 10:15:25PM -0500, Adam Ford wrote:
> The Beacon Embedded imx8mn development kit has a DSI
> to HDMI bridge chip.  The bridge supports stereo audio
> and hot-plugging.
> 
> Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
> index 1392ce02587b..3758c46c7162 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
> @@ -16,4 +16,138 @@ / {
>  	chosen {
>  		stdout-path = &uart2;
>  	};
> +
> +	connector {
> +		compatible = "hdmi-connector";
> +		type = "a";
> +
> +		port {
> +			hdmi_connector_in: endpoint {
> +				remote-endpoint = <&adv7535_out>;
> +			};
> +		};
> +	};
> +
> +	reg_hdmi: regulator-hdmi-dvdd {
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_reg_hdmi>;
> +		compatible = "regulator-fixed";

Can we start properties from 'compatible'?

> +		regulator-name = "hdmi_pwr_en";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +		startup-delay-us = <70000>;
> +		regulator-always-on;
> +	};
> +
> +	sound-hdmi {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,name = "sound-hdmi";
> +		simple-audio-card,format = "i2s";
> +
> +		simple-audio-card,cpu {
> +			sound-dai = <&sai5 0>;
> +			system-clock-direction-out;
> +		};
> +
> +		simple-audio-card,codec {
> +			sound-dai = <&adv_bridge>;
> +		};
> +	};
> +};
> +
> +&i2c2 {
> +	adv_bridge: hdmi@3d {
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_hdmi_bridge>;
> +		compatible = "adi,adv7535";

Same here.

Shawn

> +		reg = <0x3d>, <0x3b>;
> +		reg-names = "main", "cec";
> +		adi,dsi-lanes = <4>;
> +		adi,fixed-lanes;
> +		dvdd-supply = <&reg_hdmi>;
> +		v3p3-supply = <&reg_hdmi>;
> +		v1p2-supply = <&reg_hdmi>;
> +		a2vdd-supply = <&reg_hdmi>;
> +		avdd-supply = <&reg_hdmi>;
> +		pvdd-supply = <&reg_hdmi>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
> +		#sound-dai-cells = <0>;
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +
> +				adv7535_in: endpoint {
> +					remote-endpoint = <&dsi_out>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +
> +				adv7535_out: endpoint {
> +					remote-endpoint = <&hdmi_connector_in>;
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&lcdif {
> +	assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>;
> +	assigned-clock-rates = <594000000>;
> +	status = "okay";
> +};
> +
> +&mipi_dsi {
> +	samsung,esc-clock-frequency = <20000000>;
> +	status = "okay";
> +
> +	ports {
> +		port@1 {
> +			reg = <1>;
> +
> +			dsi_out: endpoint {
> +				remote-endpoint = <&adv7535_in>;
> +			};
> +		};
> +	};
> +};
> +
> +&sai5 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_sai5>;
> +	assigned-clocks = <&clk IMX8MN_CLK_SAI5>;
> +	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
> +	assigned-clock-rates = <24576000>;
> +	#sound-dai-cells = <0>;
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	pinctrl_hdmi_bridge: hdmibridgegrp {
> +		fsl,pins = <
> +			MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
> +		>;
> +	};
> +
> +	pinctrl_reg_hdmi: reghdmigrp {
> +		fsl,pins = <
> +			MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11              0x16
> +		>;
> +	};
> +
> +	pinctrl_sai5: sai5grp {
> +		fsl,pins = <
> +			MX8MN_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0	0xd6
> +			MX8MN_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK	0xd6
> +			MX8MN_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC	0xd6
> +		>;
> +	};
>  };
> -- 
> 2.39.2
>