[PATCH 1/9] MIPS: DTS: CI20: Fix regulators

[Paul Cercueil]

The regulators don't have any "reg" property, and therefore shouldn't
use an unit address in their node names. They also don't need to specify
the GPIO_ACTIVE_LOW flag, which will be ignored anyway, as they are
active-high.

Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
 arch/mips/boot/dts/ingenic/ci20.dts | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 239c4537484d..e76953dce2e7 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -67,14 +67,14 @@ led-3 {
 		};
 	};
 
-	eth0_power: fixedregulator@0 {
+	eth0_power: fixedregulator-0 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "eth0_power";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
-		gpio = <&gpb 25 GPIO_ACTIVE_LOW>;
+		gpio = <&gpb 25 0>;
 		enable-active-high;
 	};
 
@@ -97,23 +97,23 @@ ir: ir {
 		gpios = <&gpe 3 GPIO_ACTIVE_LOW>;
 	};
 
-	wlan0_power: fixedregulator@1 {
+	wlan0_power: fixedregulator-1 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "wlan0_power";
 
-		gpio = <&gpb 19 GPIO_ACTIVE_LOW>;
+		gpio = <&gpb 19 0>;
 		enable-active-high;
 	};
 
-	otg_power: fixedregulator@2 {
+	otg_power: fixedregulator-2 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "otg_power";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 
-		gpio = <&gpf 15 GPIO_ACTIVE_LOW>;
+		gpio = <&gpf 15 0>;
 		enable-active-high;
 	};
 };
-- 
2.39.2