Re: [PATCH v2 2/6] arm64: dts: qcom: sm8150: Add missing interconnect paths to USB HCs

[Konrad Dybcio]

On 2.06.2023 08:20, Abel Vesa wrote:
> The USB HCs nodes are missing the interconnect paths, so add them.
> 
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
> 
> Changes since v1:
>  * None.
> 
>  arch/arm64/boot/dts/qcom/sm8150.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> index 50a21062ea24..18c822abdb88 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> @@ -3595,6 +3595,10 @@ usb_1: usb@a6f8800 {
>  
>  			resets = <&gcc GCC_USB30_PRIM_BCR>;
>  
> +			interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>,
> +					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
> +			interconnect-names = "usb-ddr", "apps-usb";
> +
>  			usb_1_dwc3: usb@a600000 {
>  				compatible = "snps,dwc3";
>  				reg = <0 0x0a600000 0 0xcd00>;
> @@ -3644,6 +3648,10 @@ usb_2: usb@a8f8800 {
>  
>  			resets = <&gcc GCC_USB30_SEC_BCR>;
>  
> +			interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>,
> +					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>;
> +			interconnect-names = "usb-ddr", "apps-usb";
> +
>  			usb_2_dwc3: usb@a800000 {
>  				compatible = "snps,dwc3";
>  				reg = <0 0x0a800000 0 0xcd00>;