Re: [PATCH v4 3/4] arm64: dts: qcom: qdu1000: Add SDHCI pin configuration to DTSI

[Konrad Dybcio]

On 1.06.2023 08:58, Komal Bajaj wrote:
> Add required pins for SDHCI, so that the interface can work reliably.
> 
> Signed-off-by: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 50 +++++++++++++++++++++++++++
>  1 file changed, 50 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> index 6df07334f1d3..9f615f3368c2 100644
> --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> @@ -1147,6 +1147,56 @@
>  				pins = "gpio31";
>  				function = "gpio";
>  			};
> +
> +			sdc_on_state: sdc-on-state {
> +				clk-pins {
> +					pins = "sdc1_clk";
> +					drive-strength = <16>;
> +					bias-disable;
> +				};
> +
> +				cmd-pins {
> +					pins = "sdc1_cmd";
> +					drive-strength = <10>;
> +					bias-pull-up;
> +				};
> +
> +				data-pins {
> +					pins = "sdc1_data";
> +					drive-strength = <10>;
> +					bias-pull-up;
> +				};
> +
> +				rclk-pins {
> +					pins = "sdc1_rclk";
> +					bias-pull-down;
> +				};
> +			};
> +
> +			sdc_off_state: sdc-off-state {
> +				clk-pins {
> +					pins = "sdc1_clk";
> +					drive-strength = <2>;
> +					bias-disable;
> +				};
> +
> +				cmd-pins {
> +					pins = "sdc1_cmd";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +
> +				data-pins {
> +					pins = "sdc1_data";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +
> +				rclk-pins {
> +					pins = "sdc1_rclk";
> +					bias-pull-down;
> +				};
> +			};
>  		};
> 
>  		apps_smmu: iommu@15000000 {
> --
> 2.17.1
>