Re: [PATCH v3 0/9] mips: ralink: add complete clock and reset driver for mtmips SoCs

[Sergio Paracuellos]

On Thu, May 4, 2023 at 4:48 PM Sergio Paracuellos
<sergio.paracuellos@xxxxxxxxx> wrote:
>
> On Tue, Apr 18, 2023 at 11:03 AM Sergio Paracuellos
> <sergio.paracuellos@xxxxxxxxx> wrote:
> >
> > Hi all!
> >
> > This patchset is a big effort to properly implement a clock and reset
> > driver for old ralink SoCs. This allow to properly define clocks in
> > device tree and avoid to use fixed-clocks directly from 'arch/mips/ralink'
> > architecture directory code.
> >
> > Device tree 'sysc' node will be both clock and reset provider using
> > 'clock-cells' and 'reset-cells' properties.
> >
> > The ralink SoCs we are taking about are RT2880, RT3050, RT3052, RT3350,
> > RT3352, RT3883, RT5350, MT7620, MT7628 and MT7688. Mostly the code in
> > this new driver has been extracted from 'arch/mips/ralink' and cleanly
> > put using kernel clock and reset driver APIs. The clock plans for this
> > SoCs only talks about relation between CPU frequency and BUS frequency.
> > This relation is different depending on the particular SoC. CPU clock is
> > derived from XTAL frequencies.
> >
> >  Depending on the SoC we have the following frequencies:
> >  * RT2880 SoC:
> >      - XTAL: 40 MHz.
> >      - CPU: 250, 266, 280 or 300 MHz.
> >      - BUS: CPU / 2 MHz.
> >   * RT3050, RT3052, RT3350:
> >      - XTAL: 40 MHz.
> >      - CPU: 320 or 384 MHz.
> >      - BUS: CPU / 3 MHz.
> >   * RT3352:
> >      - XTAL: 40 MHz.
> >      - CPU: 384 or 400 MHz.
> >      - BUS: CPU / 3 MHz.
> >      - PERIPH: 40 MHz.
> >   * RT3383:
> >      - XTAL: 40 MHz.
> >      - CPU: 250, 384, 480 or 500 MHz.
> >      - BUS: Depends on RAM Type and CPU:
> >        + RAM DDR2: 125. ELSE 83 MHz.
> >        + RAM DDR2: 128. ELSE 96 MHz.
> >        + RAM DDR2: 160. ELSE 120 MHz.
> >        + RAM DDR2: 166. ELSE 125 MHz.
> >   * RT5350:
> >       - XTAL: 40 MHz.
> >       - CPU: 300, 320 or 360 MHz.
> >       - BUS: CPU / 3, CPU / 4, CPU / 3 MHz.
> >       - PERIPH: 40 MHz.
> >   * MT7628 and MT7688:
> >      - XTAL: 20 MHz or 40 MHz.
> >      - CPU: 575 or 580 MHz.
> >      - BUS: CPU / 3.
> >      - PCMI2S: 480 MHz.
> >      - PERIPH: 40 MHz.
> >   * MT7620:
> >      - XTAL: 20 MHz or 40 MHz.
> >      - PLL: XTAL, 480, 600 MHz.
> >      - CPU: depends on PLL and some mult and dividers.
> >      - BUS: depends on PLL and some mult and dividers.
> >      - PERIPH: 40 or XTAL MHz.
> >
> > MT7620 is a bit more complex deriving CPU clock from a PLL and an bunch of
> > register reads and predividers. To derive CPU and BUS frequencies in the
> > MT7620 SoC 'mt7620_calc_rate()' helper is used.
> > In the case XTAL can have different frequencies and we need a different
> > clock frequency for peripherals 'periph' clock in introduced.
> > The rest of the peripherals present in the SoC just follow their parent
> > frequencies.
> >
> > I am using 'mtmips' inside for ralink clock driver. This is aligned with
> > pinctrl series recently merged through pinctrl git tree [0].
> >
> > I am maintaining ralink as prefix for compatible strings after discussions
> > between Rob and Arinc in v2 of this series [1].
> >
> > Changes have been compile tested for:
> > - RT2880
> > - RT3883
> > - MT7620
> >
> > Changes have been properly tested in RT5350 SoC based board (ALL5003 board)
> > resulting in a working platform.
> >
> > Dts files for these SoCs in-tree except MT7621 are incomplete. We are
> > planning to align with openWRT files at some point and add extra needed
> > changes. Hence I am not touching them at all in these series. If this is
> > a problem, please let me know and I will update them.
> >
> > Talking about merging this series I'd like all of the patches going through
> > the MIPS tree if possible.
> >
> > Thanks in advance for your time.
> >
> > Best regards,
> >     Sergio Paracuellos
> >
> > Changes in v3:
> > - Address Stephen comments in v2:
> >     + Drop unsused include '<linux/clk.h>'.
> >     + Add fixed and factor clocks when it makes sense.
> >     + Make 'mtmips_periph_clk_ops' named variable.
> >     + WARN_ON -> WARN_ON_ONCE.
> >     + Avoid CONFIG_USB dependent code. Introduce new 'mtmips_clk_regs_init'.
> >     + Don't validate the bindings in the driver.
> >     + Make const 'struct clk_init_data' used inside macros.
> >     + do_div -> div_u64.
> >     + Make use of dev_err_probe.
>
> Hi Stephen,
>
> Does anything else need to be addressed to have all of these added?
>
> Philipp, can you please review the reset related code in PATCH 2/9 of
> these series?
>
> Thanks in advance for your time!
>
> Best regards,
>     Sergio Paracuellos

Gentle ping for this series :-)

Thanks,
    Sergio Paracuellos
>
> >
> > Changes in v2:
> > - Address bindings documentation changes pointed out by Krzysztof:
> >     + Rename the file into 'mediatek,mtmips-sysc.yaml'.
> >     + Redo commit subject and log message.
> >     + Order compatibles alphabetically.
> >     + Redo bindings description taking into account this is a system
> >       controller node which provides both clocks and resets to the world.
> >     + Drop label from example.
> >     + Use 'syscon' as node name in example.
> >     + Drop no sense 'ralink,rt2880-reset' compatible string
> > - Squash patches 6 and 7 together as pointed out by Stephen Boyd.
> >
> > Previoous series:
> > v2: https://lore.kernel.org/linux-clk/CAMhs-H-BfZb3mD8E=LeJ4vT22uibQ1DnaZsfTrtRxSiv=8L5RA@xxxxxxxxxxxxxx/T/#t
> > v1: https://lore.kernel.org/linux-clk/20230320161823.1424278-1-sergio.paracuellos@xxxxxxxxx/T/#t
> >
> > [0]: https://lore.kernel.org/linux-gpio/e9e6ad87-2db5-9767-ff39-64a302b06185@xxxxxxxxxx/T/#t
> > [1]: https://lore.kernel.org/linux-clk/CAMhs-H-BfZb3mD8E=LeJ4vT22uibQ1DnaZsfTrtRxSiv=8L5RA@xxxxxxxxxxxxxx/T/#mfe725b6e3382c6fb09736472a846cbbc84f264dc
> >
> > Sergio Paracuellos (9):
> >   dt-bindings: clock: add mtmips SoCs system controller
> >   clk: ralink: add clock and reset driver for MTMIPS SoCs
> >   mips: ralink: rt288x: remove clock related code
> >   mips: ralink: rt305x: remove clock related code
> >   mips: ralink: rt3883: remove clock related code
> >   mips: ralink: mt7620: remove clock related code
> >   mips: ralink: remove reset related code
> >   mips: ralink: get cpu rate from new driver code
> >   MAINTAINERS: add Mediatek MTMIPS Clock maintainer
> >
> >  .../bindings/clock/mediatek,mtmips-sysc.yaml  |   65 +
> >  MAINTAINERS                                   |    6 +
> >  arch/mips/include/asm/mach-ralink/mt7620.h    |   35 -
> >  arch/mips/include/asm/mach-ralink/rt288x.h    |   10 -
> >  arch/mips/include/asm/mach-ralink/rt305x.h    |   21 -
> >  arch/mips/include/asm/mach-ralink/rt3883.h    |    8 -
> >  arch/mips/ralink/clk.c                        |   26 +-
> >  arch/mips/ralink/common.h                     |    5 -
> >  arch/mips/ralink/mt7620.c                     |  226 ----
> >  arch/mips/ralink/of.c                         |    4 -
> >  arch/mips/ralink/reset.c                      |   61 -
> >  arch/mips/ralink/rt288x.c                     |   31 -
> >  arch/mips/ralink/rt305x.c                     |   78 --
> >  arch/mips/ralink/rt3883.c                     |   44 -
> >  drivers/clk/ralink/Kconfig                    |    7 +
> >  drivers/clk/ralink/Makefile                   |    1 +
> >  drivers/clk/ralink/clk-mtmips.c               | 1134 +++++++++++++++++
> >  17 files changed, 1232 insertions(+), 530 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml
> >  create mode 100644 drivers/clk/ralink/clk-mtmips.c
> >
> > --
> > 2.25.1
> >