[PATCH v5 05/44] char: tpm: handle HAS_IOPORT dependencies

[Niklas Schnelle]

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add this dependency and ifdef
sections of code using inb()/outb() as alternative access methods.

Co-developed-by: Arnd Bergmann <arnd@xxxxxxxxxx>
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxxxx>
Signed-off-by: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
---
 drivers/char/tpm/Kconfig        |  1 +
 drivers/char/tpm/tpm_infineon.c | 16 ++++++++++++----
 drivers/char/tpm/tpm_tis_core.c | 19 ++++++++-----------
 3 files changed, 21 insertions(+), 15 deletions(-)

diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index 927088b2c3d3..418c9ed59ffd 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -149,6 +149,7 @@ config TCG_NSC
 config TCG_ATMEL
 	tristate "Atmel TPM Interface"
 	depends on PPC64 || HAS_IOPORT_MAP
+	depends on HAS_IOPORT
 	help
 	  If you have a TPM security chip from Atmel say Yes and it 
 	  will be accessible from within Linux.  To compile this driver 
diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c
index 9c924a1440a9..99c6e565ec8d 100644
--- a/drivers/char/tpm/tpm_infineon.c
+++ b/drivers/char/tpm/tpm_infineon.c
@@ -26,7 +26,9 @@
 #define	TPM_MAX_TRIES		5000
 #define	TPM_INFINEON_DEV_VEN_VALUE	0x15D1
 
+#ifdef CONFIG_HAS_IOPORT
 #define TPM_INF_IO_PORT		0x0
+#endif
 #define TPM_INF_IO_MEM		0x1
 
 #define TPM_INF_ADDR		0x0
@@ -51,34 +53,40 @@ static struct tpm_inf_dev tpm_dev;
 
 static inline void tpm_data_out(unsigned char data, unsigned char offset)
 {
+#ifdef CONFIG_HAS_IOPORT
 	if (tpm_dev.iotype == TPM_INF_IO_PORT)
 		outb(data, tpm_dev.data_regs + offset);
 	else
+#endif
 		writeb(data, tpm_dev.mem_base + tpm_dev.data_regs + offset);
 }
 
 static inline unsigned char tpm_data_in(unsigned char offset)
 {
+#ifdef CONFIG_HAS_IOPORT
 	if (tpm_dev.iotype == TPM_INF_IO_PORT)
 		return inb(tpm_dev.data_regs + offset);
-	else
-		return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset);
+#endif
+	return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset);
 }
 
 static inline void tpm_config_out(unsigned char data, unsigned char offset)
 {
+#ifdef CONFIG_HAS_IOPORT
 	if (tpm_dev.iotype == TPM_INF_IO_PORT)
 		outb(data, tpm_dev.config_port + offset);
 	else
+#endif
 		writeb(data, tpm_dev.mem_base + tpm_dev.index_off + offset);
 }
 
 static inline unsigned char tpm_config_in(unsigned char offset)
 {
+#ifdef CONFIG_HAS_IOPORT
 	if (tpm_dev.iotype == TPM_INF_IO_PORT)
 		return inb(tpm_dev.config_port + offset);
-	else
-		return readb(tpm_dev.mem_base + tpm_dev.index_off + offset);
+#endif
+	return readb(tpm_dev.mem_base + tpm_dev.index_off + offset);
 }
 
 /* TPM header definitions */
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 558144fa707a..0ee5a83e35a8 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -954,11 +954,6 @@ static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value)
 		clkrun_val &= ~LPC_CLKRUN_EN;
 		iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
 
-		/*
-		 * Write any random value on port 0x80 which is on LPC, to make
-		 * sure LPC clock is running before sending any TPM command.
-		 */
-		outb(0xCC, 0x80);
 	} else {
 		data->clkrun_enabled--;
 		if (data->clkrun_enabled)
@@ -969,13 +964,15 @@ static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value)
 		/* Enable LPC CLKRUN# */
 		clkrun_val |= LPC_CLKRUN_EN;
 		iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
-
-		/*
-		 * Write any random value on port 0x80 which is on LPC, to make
-		 * sure LPC clock is running before sending any TPM command.
-		 */
-		outb(0xCC, 0x80);
 	}
+
+#ifdef CONFIG_HAS_IOPORT
+	/*
+	 * Write any random value on port 0x80 which is on LPC, to make
+	 * sure LPC clock is running before sending any TPM command.
+	 */
+	outb(0xCC, 0x80);
+#endif
 }
 
 static const struct tpm_class_ops tpm_tis = {
-- 
2.39.2