Re: [PATCH v2] ufs: poll HCS.UCRDY before issuing a UIC command

[Bart Van Assche]

On 5/15/23 20:33, Kiwoong Kim wrote:
> v1 -> v2: replace usleep_range with udelay
> because it's a sleepable period.
>
> With auto hibern8 enabled, UIC could be working
> for a while to process a hibern8 operation and HCI
> reports UIC not ready for a short term through HCS.UCRDY.
> And UFS driver can't recognize the operation.
> UFSHCI spec specifies UCRDY like this:
> whether the host controller is ready to process UIC COMMAND
>
> The 'ready' could be seen as many different meanings. If the meaning
> includes not processing any request from HCI, processing a hibern8
> operation can be 'not ready'. In this situation, the driver needs to
> wait until the operations is completed.
>
> Signed-off-by: Kiwoong Kim <kwmad.kim@xxxxxxxxxxx>
> ---
>   drivers/ufs/core/ufshcd.c | 13 ++++++++++++-
>   1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
> index 9434328..5f6819a 100644
> --- a/drivers/ufs/core/ufshcd.c
> +++ b/drivers/ufs/core/ufshcd.c
> @@ -2365,7 +2365,18 @@ static inline int ufshcd_hba_capabilities(struct ufs_hba *hba)
>    */
>   static inline bool ufshcd_ready_for_uic_cmd(struct ufs_hba *hba)
>   {
> -	return ufshcd_readl(hba, REG_CONTROLLER_STATUS) & UIC_COMMAND_READY;
> +	ktime_t timeout = ktime_add_ms(ktime_get(), UIC_CMD_TIMEOUT);
> +	u32 val = 0;
> +
> +	do {
> +		val = ufshcd_readl(hba, REG_CONTROLLER_STATUS) &
> +			UIC_COMMAND_READY;
> +		if (val)
> +			break;
> +		udelay(500);
> +	} while (ktime_before(ktime_get(), timeout));
> +
> +	return val ? true : false;
>   }

Sleeping during up to 500 ms while holding a spin lock is not acceptable.
Has it been considered to modify the UFS core such that the host_lock is
not held around calls of the above function, e.g. via the (untested) patch
below?

Thanks,

Bart.


diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 9736b2b4120e..394283b04d7c 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -2416,7 +2416,6 @@ __ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd,
 		      bool completion)
 {
 	lockdep_assert_held(&hba->uic_cmd_mutex);
-	lockdep_assert_held(hba->host->host_lock);

 	if (!ufshcd_ready_for_uic_cmd(hba)) {
 		dev_err(hba->dev,
@@ -2452,9 +2451,7 @@ int ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
 	mutex_lock(&hba->uic_cmd_mutex);
 	ufshcd_add_delay_before_dme_cmd(hba);

-	spin_lock_irqsave(hba->host->host_lock, flags);
 	ret = __ufshcd_send_uic_cmd(hba, uic_cmd, true);
-	spin_unlock_irqrestore(hba->host->host_lock, flags);
 	if (!ret)
 		ret = ufshcd_wait_for_uic_cmd(hba, uic_cmd);

@@ -4122,8 +4119,8 @@ static int ufshcd_uic_pwr_ctrl(struct ufs_hba *hba, struct uic_command *cmd)
 		wmb();
 		reenable_intr = true;
 	}
-	ret = __ufshcd_send_uic_cmd(hba, cmd, false);
 	spin_unlock_irqrestore(hba->host->host_lock, flags);
+	ret = __ufshcd_send_uic_cmd(hba, cmd, false);
 	if (ret) {
 		dev_err(hba->dev,
 			"pwr ctrl cmd 0x%x with mode 0x%x uic error %d\n",