[RFC PATCH 00/22] riscv: s64ilp32: Running 32-bit Linux kernel on 64-bit supervisor mode

From: guoren
Date: Thu May 18 2023 - 09:12:32 EST


From: Guo Ren <guoren@xxxxxxxxxxxxxxxxx>

This patch series adds s64ilp32 support to riscv. The term s64ilp32
means smode-xlen=64 and -mabi=ilp32 (ints, longs, and pointers are all
32-bit), i.e., running 32-bit Linux kernel on pure 64-bit supervisor
mode. There have been many 64ilp32 abis existing, such as mips-n32 [1],
arm-aarch64ilp32 [2], and x86-x32 [3], but they are all about userspace.
Thus, this should be the first time running a 32-bit Linux kernel with
the 64ilp32 ABI at supervisor mode (If not, correct me).

Why 32-bit Linux?
=================
The motivation for using a 32-bit Linux kernel is to reduce memory
footprint and meet the small capacity of DDR & cache requirement
(e.g., 64/128MB SIP SoC).

Here are the 32-bit v.s. 64-bit Linux kernel data type comparison
summary:
32-bit 64-bit
sizeof(page): 32bytes 64bytes
sizeof(list_head): 8bytes 16bytes
sizeof(hlist_head): 8bytes 16bytes
sizeof(vm_area): 68bytes 136bytes
...

The size of ilp32's long & pointer is just half of lp64's (rv64 default
abi - longs and pointers are all 64-bit). This significant difference
in data type causes different memory & cache footprint costs. Here is
the comparison measurement between s32ilp32, s64ilp32, and s64lp64 in
the same 128MB qemu system environment:

Rootfs:
u32ilp32 - Using the same 32-bit userspace rootfs.ext2 (UXL=32) binary
from buildroot 2023.02-rc3, qemu_riscv32_virt_defconfig

Linux:
s32ilp32 - Linux version 6.3.0-rc1 (124MB)
rv32_defconfig: $(Q)$(MAKE) -f $(srctree)/Makefile
defconfig 32-bit.config

s64lp64 - Linux version 6.3.0-rc1 (126MB)
defconfig: $(Q)$(MAKE) -f $(srctree)/Makefile defconfig

s64ilp32 - Linux version 6.3.0-rc1 (126MB)
rv64ilp32_defconfig: $(Q)$(MAKE) -f $(srctree)/Makefile
defconfig 64ilp32.config

Opensbi:
m64lp64 - (2MB) OpenSBI v1.2-80-g4b28afc98bbe
m32ilp32 - (4MB) OpenSBI v1.2-80-g4b28afc98bbe

+----------------------------------------+--------
| u32ilp32 |
| UXL=32 | Rootfs
+----------------------------------------+--------
| +----------+ +---------+ | +---------+ |
| | s64ilp32 | | s64lp64 | | | s32ilp32| |
| | SXL=64 | | SXL=64 | | | SXL=32 | | Linux
| +----------+ +---------+ | +---------+ |
+----------------------------------------+--------
| +----------------------+ | +---------+ |
| | m64lp64 | | | m32ilp32| |
| | MXL=64 | | | MXL=32 | | Opensbi
| +----------------------+ | +---------+ |
+----------------------------------------+--------
| +----------------------+ | +---------+ |
| | qemu-rv64 | | |qemu-rv32| | HW
| +----------------------+ | +---------+ |
+----------------------------------------+--------

Mem-usage:
(s32ilp32) # free
total used free shared buff/cache available
Mem: 100040 8380 88244 44 3416 88080

(s64lp64) # free
total used free shared buff/cache available
Mem: 91568 11848 75796 44 3924 75952

(s64ilp32) # free
total used free shared buff/cache available
Mem: 101952 8528 90004 44 3420 89816
^^^^^

It's a rough measurement based on the current default config without any
modification, and 32-bit (s32ilp32, s64ilp32) saved more than 16% memory
to 64-bit (s64lp64). But s32ilp32 & s64ilp32 have a similar memory
footprint (about 0.33% difference), meaning s64ilp32 has a big chance to
replace s32ilp32 on the 64-bit machine.

Why s64ilp32?
=============
The current RISC-V has the profiles of RVA20S64, RVA22S64, and RVA23S64
(ongoing) [4], but no RVA**S32 profile exists or any ongoing plan. That
means when a vendor wants to produce a 32-bit s-mode RISC-V Application
Processor, they have no shape to follow. Therefore, many cheap riscv
chips have come out but follow the RVA2xS64 profiles, such as Allwinner
D1/D1s/F133 [5], SOPHGO CV1800B [6], Canaan Kendryte k230 [7], and
Bouffalo Lab BL808 which are typically cortex a7/a35/a53 product
scenarios. The D1 & CV1800B & BL808 didn't support UXL=32 (32-bit U-mode),
so they need a new u64ilp32 userspace ABI which has no software ecosystem
for the current. Thus, the first landing of s64ilp32 would be on Canaan
Kendryte k230, which has c908 with rv64gcv and compat user mode
(sstatus.uxl=32/64), which could support the existing rv32 userspace
software ecosystem.

Another reason for inventing s64ilp32 is performance benefits and
simplify 64-bit CPU hardware design (v.s. s32ilp32).

Why s64ilp32 has better performance?
====================================
Generally speaking, we should build a 32-bit hardware s-mode to run
32-bit Linux on a 64-bit processor (such as Linux-arm32 on cortex-a53).
Or only use old 32ilp32-abi on a 64-bit machine (such as mips
SYS_SUPPORTS_32BIT_KERNEL). These can't reuse performance-related
features and instructions of the 64-bit hardware, such as 64-bit ALU,
AMO, and LD/SD, which would cause significant performance gaps on many
Linux features:

- memcpy/memset/strcmp (s64ilp32 has half of the instructions count
and double the bandwidth of load/store instructions than s32ilp32.)

- ebpf JIT is a 64-bit virtual ISA, which is not suitable
for mapping to s32ilp32.

- Atomic64 (s64ilp32 has the exact native instructions mapping as
s64lp64, but s32ilp32 only uses generic_atomic64, a tradeoff &
limited software solution.)

- 64-bit native arithmetic instructions for "long long" type

- Support cmxchg_double for slub (The 2nd 32-bit Linux
supports the feature, the 1st is i386.)

- ...

Compared with the user space ecosystem, the 32-bit Linux kernel is more
eager to need 64ilp32 to improve performance because the Linux kernel
can't utilize float-point/vector features of the ISA.

Let's look at performance from another perspective (s64ilp32 v.s.
s64lp64). Just as the first chapter said, the pointer size of ilp32 is
half of the lp64, and it reduces the size of the critical data structs
(e.g., page, list, ...). That means the cache of using ilp32 could
contain double data that lp64 with the same cache capacity, which is a
natural advantage of 32-bit.

Why s64ilp32 simplifies CPU design?
===================================
Yes, there are a lot of runing 32-bit Linux on 64-bit hardware examples
in history, such as arm cortex a35/a53/a55, which implements the 32-bit
EL1/EL2/EL3 hardware mode to support 32-bit Linux. We could follow Arm's
style, but riscv could choose another better way. Compared to UXL=32,
the MXL=SXL=32 has many CSR-related hardware functionalities, which
causes a lot of effort to mix them into 64-bit hardware. The s64ilp32
works on MXL=SXL=64 mode, so the CPU vendors needn't implement 32-bit
machine and supervisor modes.

How does s64ilp32 work?
=======================
The s64ilp32 is the same as the s64lp64 compat mode from a hardware
view, i.e., MXL=SXL=64 + UXL=32. Because the s64ilp32 uses CONFIG_32BIT
of Linux, it only supports u32ilp32 abi user space, the current standard
rv32 software ecosystem, and it can't work with u64lp64 abi (I don't
want that complex and useless stuff). But it may work with u64ilp32 in the
future; now, the s64ilp32 depends on the UXL=32 feature of the hardware.

The 64ilp32 gcc still uses sign-extend lw & auipc to generate address
variables because inserting zero-extend instructions to mask the highest
32-bit would cause significant code size and performance problems. Thus,
we invented an OS approach to solve the problem:
- When satp=bare and start physical address < 2GB, there is no sign-extend
address problem.
- When satp=bare and start physical address > 2GB, we need zjpm liked
hardware extensions to mask high 32bit.
(Fortunately, all existed SoCs' (D1/D1s/F133, CV1800B, k230, BL808)
start physical address < 2GB.)
- When satp=sv39, we invent double mapping to make the sign-extended
virtual address the same as the zero-extended virtual address.

+--------+ +---------+ +--------+
| | +--| 511:PUD1| | |
| | | +---------+ | |
| | | | 510:PUD0|--+ | |
| | | +---------+ | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | INVALID | | | |
| | | | | | | |
| .... | | | | | | .... |
| | | | | | | |
| | | +---------+ | | |
| | +--| 3:PUD1 | | | |
| | | +---------+ | | |
| | | | 2:PUD0 |--+ | |
| | | +---------+ | | |
| | | |1:USR_PUD| | | |
| | | +---------+ | | |
| | | |0:USR_PUD| | | |
+--------+<--+ +---------+ +-->+--------+
PUD1 ^ PGD PUD0
1GB | 4GB 1GB
|
+----------+
| Sv39 PGDP|
+----------+
SATP

The size of xlen was always equal to the pointer/long size before
s64ilp32 emerged. So we need to introduce a new type of data - xlen_t,
which could deal with CSR-related and callee-save/restore operations.

Some kernel features use 32BIT/64BIT to determine the exact ISA, such as
ebpf JIT would map to rv32 ISA when CONFIG_32BIT=y. But s64ilp32 needs
the ebpf JIT map to rv64 ISA when CONFIG_32BIT=y and we need to use
another config to distinguish the difference.

More detials, please review the path series.

How to run s64ilp32?
====================

GNU toolchain
-------------
git clone https://github.com/Liaoshihua/riscv-gnu-toolchain.git
cd riscv-gnu-toolchain
./configure --prefix="$PWD/opt-rv64-ilp32/" --with-arch=rv64imac --with-abi=ilp32
make linux
export PATH=$PATH:$PWD/opt-rv64-ilp32/bin/

Opensbi
-------
git clone https://github.com/riscv-software-src/opensbi.git
CROSS_COMPILE=riscv64-unknown-linux-gnu- make PLATFORM=generic

Linux kernel
------------
git clone https://github.com/guoren83/linux.git -b s64ilp32
cd linux
make ARCH=riscv CROSS_COMPILE=riscv64-unknown-linux-gnu- rv64ilp32_defconfig
make ARCH=riscv CROSS_COMPILE=riscv64-unknown-linux-gnu- all

Rootfs
------
git clone git://git.busybox.net/buildroot
cd buildroot
make qemu_riscv32_virt_defconfig
make

Qemu
----
git clone https://github.com/plctlab/plct-qemu.git -b plct-s64ilp32-dev
cd plct-qemu
mkdir build
cd build
../qemu/configure --target-list="riscv64-softmmu riscv32-softmmu"
make

Run
---
./qemu-system-riscv64 -cpu rv64 -M virt -m 128m -nographic -bios fw_dynamic.bin -kernel Image -drive file=rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 -append "rootwait root=/dev/vda ro console=ttyS0 earlycon=sbi" -netdev user,id=net0 -device virtio-net-device,netdev=net0

OpenSBI v1.2-119-gdc1c7db05e07
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|___/_____|
| |
|_|

Platform Name : riscv-virtio,qemu
Platform Features : medeleg
Platform HART Count : 1
Platform IPI Device : aclint-mswi
Platform Timer Device : aclint-mtimer @ 10000000Hz
Platform Console Device : uart8250
Platform HSM Device : ---
Platform PMU Device : ---
Platform Reboot Device : sifive_test
Platform Shutdown Device : sifive_test
Platform Suspend Device : ---
Platform CPPC Device : ---
Firmware Base : 0x60000000
Firmware Size : 360 KB
Firmware RW Offset : 0x40000
Runtime SBI Version : 1.0

Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*
Domain0 Region00 : 0x0000000002000000-0x000000000200ffff M: (I,R,W) S/U: ()
Domain0 Region01 : 0x0000000060040000-0x000000006005ffff M: (R,W) S/U: ()
Domain0 Region02 : 0x0000000060000000-0x000000006003ffff M: (R,X) S/U: ()
Domain0 Region03 : 0x0000000000000000-0xffffffffffffffff M: (R,W,X) S/U: (R,W,X)
Domain0 Next Address : 0x0000000060200000
Domain0 Next Arg1 : 0x0000000067e00000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Domain0 SysSuspend : yes

Boot HART ID : 0
Boot HART Domain : root
Boot HART Priv Version : v1.12
Boot HART Base ISA : rv64imafdch
Boot HART ISA Extensions : time,sstc
Boot HART PMP Count : 16
Boot HART PMP Granularity : 4
Boot HART PMP Address Bits: 54
Boot HART MHPM Count : 16
Boot HART MIDELEG : 0x0000000000001666
Boot HART MEDELEG : 0x0000000000f0b509
[ 0.000000] Linux version 6.3.0-rc1-00086-gc8d2fedb997a (guoren@fedora) (riscv64-unknown-linux-gnu-gcc (g5e578a16201f) 13.0.1 20230206 (experimental), GNU ld (GNU Binutils) 2.40.50.20230205) #1 SMP Sun May 14 10:46:42 EDT 2023
[ 0.000000] random: crng init done
[ 0.000000] OF: fdt: Ignoring memory range 0x60000000 - 0x60200000
[ 0.000000] Machine model: riscv-virtio,qemu
[ 0.000000] efi: UEFI not found.
[ 0.000000] OF: reserved mem: 0x60000000..0x6003ffff (256 KiB) map non-reusable mmode_resv1@60000000
[ 0.000000] OF: reserved mem: 0x60040000..0x6005ffff (128 KiB) map non-reusable mmode_resv0@60040000
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000060200000-0x0000000067ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000060200000-0x0000000067ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000060200000-0x0000000067ffffff]
[ 0.000000] On node 0, zone Normal: 512 pages in unavailable ranges
[ 0.000000] SBI specification v1.0 detected
[ 0.000000] SBI implementation ID=0x1 Version=0x10002
[ 0.000000] SBI TIME extension detected
[ 0.000000] SBI IPI extension detected
[ 0.000000] SBI RFENCE extension detected
[ 0.000000] SBI SRST extension detected
[ 0.000000] SBI HSM extension detected
[ 0.000000] riscv: base ISA extensions acdfhim
[ 0.000000] riscv: ELF capabilities acdfim
[ 0.000000] percpu: Embedded 13 pages/cpu s24352 r8192 d20704 u53248
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 31941
[ 0.000000] Kernel command line: rootwait root=/dev/vda ro console=ttyS0 earlycon=sbi norandmaps
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] fixmap : 0x9ce00000 - 0x9d000000 (2048 kB)
[ 0.000000] pci io : 0x9d000000 - 0x9e000000 ( 16 MB)
[ 0.000000] vmemmap : 0x9e000000 - 0xa0000000 ( 32 MB)
[ 0.000000] vmalloc : 0xa0000000 - 0xc0000000 ( 512 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc7e00000 ( 126 MB)
[ 0.000000] Memory: 97748K/129024K available (8699K kernel code, 8867K rwdata, 4096K rodata, 4204K init, 361K bss, 31276K reserved, 0K cma-reserved)
...
Starting network: udhcpc: started, v1.36.0
udhcpc: broadcasting discover
udhcpc: broadcasting select for 10.0.2.15, server 10.0.2.2
udhcpc: lease of 10.0.2.15 obtained from 10.0.2.2, lease time 86400
deleting routers
adding dns 10.0.2.3
OK

Welcome to Buildroot
buildroot login: root
# cat /proc/cpuinfo
processor : 0
hart : 0
isa : rv64imafdch_zihintpause_zbb_sstc
mmu : sv39
mvendorid : 0x0
marchid : 0x70232
mimpid : 0x70232

# uname -a
Linux buildroot 6.3.0-rc1-00086-gc8d2fedb997a #1 SMP Sun May 14 10:46:42 EDT 2023 riscv32 GNU/Linux
# ls /lib/
ld-linux-riscv32-ilp32d.so.1 libgcc_s.so.1
libanl.so.1 libm.so.6
libatomic.so libnss_dns.so.2
libatomic.so.1 libnss_files.so.2
libatomic.so.1.2.0 libpthread.so.0
libc.so.6 libresolv.so.2
libcrypt.so.1 librt.so.1
libdl.so.2 libutil.so.1
libgcc_s.so modules

# cat /proc/99/maps
0000000055554000-0000000055634000 r-xp 00000000 00000000fe:00 17 /bin/busybox
0000000055634000-0000000055636000 r--p 00000000df000 00000000fe:00 17 /bin/busybox
0000000055636000-0000000055637000 rw-p 00000000e1000 00000000fe:00 17 /bin/busybox
0000000055637000-0000000055659000 rw-p 00000000 00:00 0 [heap]
0000000077e8d000-0000000077fbe000 r-xp 00000000 00000000fe:00 137 /lib/libc.so.6
0000000077fbe000-0000000077fbf000 ---p 00000000131000 00000000fe:00 137 /lib/libc.so.6
0000000077fbf000-0000000077fc1000 r--p 00000000131000 00000000fe:00 137 /lib/libc.so.6
0000000077fc1000-0000000077fc2000 rw-p 00000000133000 00000000fe:00 137 /lib/libc.so.6
0000000077fc2000-0000000077fcc000 rw-p 00000000 00:00 0
0000000077fcc000-0000000077fd4000 r-xp 00000000 00000000fe:00 146 /lib/libresolv.so.2
0000000077fd4000-0000000077fd5000 ---p 000000008000 00000000fe:00 146 /lib/libresolv.so.2
0000000077fd5000-0000000077fd6000 r--p 000000008000 00000000fe:00 146 /lib/libresolv.so.2
0000000077fd6000-0000000077fd7000 rw-p 000000009000 00000000fe:00 146 /lib/libresolv.so.2
0000000077fd7000-0000000077fd9000 rw-p 00000000 00:00 0
0000000077fd9000-0000000077fdb000 r--p 00000000 00:00 0 [vvar]
0000000077fdb000-0000000077fdd000 r-xp 00000000 00:00 0 [vdso]
0000000077fdd000-0000000077ffc000 r-xp 00000000 00000000fe:00 132 /lib/ld-linux-riscv32-ilp32d.so.1
0000000077ffd000-0000000077ffe000 r--p 000000001f000 00000000fe:00 132 /lib/ld-linux-riscv32-ilp32d.so.1
0000000077ffe000-0000000077fff000 rw-p 0000000020000 00000000fe:00 132 /lib/ld-linux-riscv32-ilp32d.so.1
000000007ffde000-000000007ffff000 rw-p 00000000 00:00 0 [stack]

Other resources
===============

OpenEuler riscv32 rootfs
------------------------
The OpenEuler riscv32 rootfs you can download from here:
https://repo.tarsier-infra.com/openEuler-RISC-V/obs/archive/rv32/openeuler-image-qemu-riscv32-20221111070036.rootfs.ext4
(Made by Junqiang Wang)

Debain riscv32 rootfs
---------------------
The Debian riscv32 rootfs you can download from here:
https://github.com/yuzibo/riscv32
(Made by Bo YU and Han Gao)

Fedora riscv32 rootfs
---------------------
https://fedoraproject.org/wiki/Architectures/RISC-V/RV32
(Made by Wei Fu)

LLVM 64ilp32
------------
git clone https://github.com/luxufan/llvm-project.git -b rv64-ilp32
cd llvm-project
mkdir build && cd build
cmake ../llvm -G Ninja -DCMAKE_BUILD_TYPE=Release -DLLVM_TARGETS_TO_BUILD=“X86;RISCV" -DLLVM_ENABLE_PROJECTS="clang;lld"
ninja all

(LLVM development status is that CC=clang can compile the kernel with
LLVM=1 but has not yet booted successfully.)

Patch organization
==================
This series depends on 64ilp32 toolchain patches that are not upstream
yet.

PATCH [0-1] unify vdso32 & compat_vdso
PATCH [2] adds time-related vDSO common flow for vdso32
PATCH [3] adds s64ilp32 support of clocksource driver
PATCH [5] adds s64ilp32 support of irqchip driver
PATCH [4,6-12] add basic data types and compiling framework
PATCH [13] adds MMU_SV39 support
PATCH [14] adds native atomic64
PATCH [15] adds TImode
PATCH [16] adds cmpxchg_double
PATCH [17-19] cleanup kconfig & add defconfig
PATCH [20-21] fix temporary compiler problems

Open issues
===========

Callee saved the register width
-------------------------------
For 64-bit ISA (including 64lp64, 64ilp32), callee can't determine the
correct width used in the register, so they saved the maximum width of
the ISA register, i.e., xlen size. We also found this rule in x86-x32,
mips-n32, and aarch64ilp32, which comes from 64lp64. See PATCH [20]

Here are two downsides of this:
- It would cause a difference with 32ilp32's stack frame, and s64ilp32
reuses 32ilp32 software stack. Thus, many additional compatible
problems would happen during the porting of 64ilp32 software.
- It also increases the budget of the stack usage.
<setup_vm>:
auipc a3,0xff3fb
add a3,a3,1234 # c0000000
li a5,-1
lui a4,0xc0000
addw sp,sp,-96
srl a5,a5,0x20
subw a4,a4,a3
auipc a2,0x111a
add a2,a2,1212 # c1d1f000
sd s0,80(sp)----+
sd s1,72(sp) |
sd s2,64(sp) |
sd s7,24(sp) |
sd s8,16(sp) |
sd s9,8(sp) |-> All <= 32b widths, but occupy 64b
sd ra,88(sp) | stack space.
sd s3,56(sp) | Affect memory footprint & cache
sd s4,48(sp) | performance.
sd s5,40(sp) |
sd s6,32(sp) |
sd s10,0(sp)----+
sll a1,a4,0x20
subw a2,a2,a3
and a4,a4,a5

So here is a proposal to riscv 64ilp32 ABI:
- Let the compiler prevent callee saving ">32b variables" in
callee-registers. (Q: We need to measure, how the influence of
64b variables cross function call?)

EF_RISCV_X32
------------
We add an e_flag (EF_RISCV_X32) to distinguish the 32-bit ELF, which
occupies BIT[6] of the e_flags layout.

ELF Header:
Magic: 7f 45 4c 46 01 01 01 00 00 00 00 00 00 00 00 00
Class: ELF32
Data: 2's complement, little endian
Version: 1 (current)
OS/ABI: UNIX - System V
ABI Version: 0
Type: REL (Relocatable file)
Machine: RISC-V
Version: 0x1
Entry point address: 0x0
Start of program headers: 0 (bytes into file)
Start of section headers: 24620 (bytes into file)
Flags: 0x21, RVC, X32, soft-float ABI
^^^
64-bit Optimization problem
---------------------------
There is an existing problem in 64ilp32 gcc that combines two pointers
in one register. Liao is solving that problem. Before he finishes the
job, we could prevent it with a simple noinline attribute, fortunately.
struct path {
struct vfsmount *mnt;
struct dentry *dentry;
} __randomize_layout;

struct nameidata {
struct path path;
...
struct path root;
...
} __randomize_layout;

struct nameidata *nd
...
nd->path = nd->root;
6c88 ld a0,24(s1)
^^ // a0 contains two pointers
e088 sd a0,0(s1)
mntget(path->mnt);
// Need "lw a0,0(s1)" or "a0 << 32; a0 >> 32"
2a6150ef jal c01ce946 <mntget> // bug!

Acknowledge
===========
The s64ilp32 needs many other projects' cooperation. Thx, all guys
involved:
- GNU: LiaoShihua <shihua@xxxxxxxxxxx>,
Jiawe Chen<jiawei@xxxxxxxxxxx>
- Qemu: Weiwei Li <liweiwei@xxxxxxxxxxx>
- LLVM: luxufan <luxufan@xxxxxxxxxxx>,
Chunyu Liao<chunyu@xxxxxxxxxxx>
- OpenEuler rv32: Junqiang Wang <wangjunqiang@xxxxxxxxxxx>
- Debian rv32: Bo YU <tsu.yubo@xxxxxxxxx>
Han Gao <gaohan@xxxxxxxxxxx>
- Fedora rv32: Wei Fu <wefu@xxxxxxxxxx>

References
==========
[1] https://techpubs.jurassic.nl/manuals/0630/developer/Mpro_n32_ABI/sgi_html/index.html
[2] https://wiki.debian.org/Arm64ilp32Port
[3] https://lwn.net/Articles/456731/
[4] https://github.com/riscv/riscv-profiles/releases
[5] https://www.cnx-software.com/2021/10/25/allwinner-d1s-f133-risc-v-processor-64mb-ddr2/
[6] https://milkv.io/duo/
[7] https://twitter.com/tphuang/status/1631308330256801793
[8] https://www.cnx-software.com/2022/12/02/pine64-ox64-sbc-bl808-risc-v-multi-protocol-wisoc-64mb-ram/

Guo Ren (22):
riscv: vdso: Unify vdso32 & compat_vdso into vdso/Makefile
riscv: vdso: Remove compat_vdso/
riscv: vdso: Add time-related vDSO common flow for vdso32
clocksource: riscv: s64ilp32: Use __riscv_xlen instead of CONFIG_32BIT
riscv: s64ilp32: Introduce xlen_t
irqchip: riscv: s64ilp32: Use __riscv_xlen instead of CONFIG_32BIT
riscv: s64ilp32: Add sbi support
riscv: s64ilp32: Add asid support
riscv: s64ilp32: Introduce PTR_L and PTR_S
riscv: s64ilp32: Enable user space runtime environment
riscv: s64ilp32: Add ebpf jit support
riscv: s64ilp32: Add ELF32 support
riscv: s64ilp32: Add ARCH RV64 ILP32 compiling framework
riscv: s64ilp32: Add MMU_SV39 mode support for 32BIT
riscv: s64ilp32: Enable native atomic64
riscv: s64ilp32: Add TImode (128 int) support
riscv: s64ilp32: Implement cmpxchg_double
riscv: s64ilp32: Disable KVM
riscv: Cleanup rv32_defconfig
riscv: s64ilp32: Add rv64ilp32_defconfig
riscv: s64ilp32: Correct the rv64ilp32 stackframe layout
riscv: s64ilp32: Temporary workaround solution to gcc problem

arch/riscv/Kconfig | 36 +++-
arch/riscv/Makefile | 24 ++-
arch/riscv/configs/32-bit.config | 2 -
arch/riscv/configs/64ilp32.config | 2 +
arch/riscv/include/asm/asm.h | 5 +
arch/riscv/include/asm/atomic.h | 6 +
arch/riscv/include/asm/cmpxchg.h | 53 ++++++
arch/riscv/include/asm/cpu_ops_sbi.h | 4 +-
arch/riscv/include/asm/csr.h | 58 +++---
arch/riscv/include/asm/extable.h | 2 +-
arch/riscv/include/asm/page.h | 24 ++-
arch/riscv/include/asm/pgtable-64.h | 42 ++---
arch/riscv/include/asm/pgtable.h | 26 ++-
arch/riscv/include/asm/processor.h | 8 +-
arch/riscv/include/asm/ptrace.h | 96 +++++-----
arch/riscv/include/asm/sbi.h | 24 +--
arch/riscv/include/asm/stacktrace.h | 6 +
arch/riscv/include/asm/timex.h | 10 +-
arch/riscv/include/asm/vdso.h | 34 +++-
arch/riscv/include/asm/vdso/gettimeofday.h | 84 +++++++++
arch/riscv/include/uapi/asm/elf.h | 2 +-
arch/riscv/include/uapi/asm/unistd.h | 1 +
arch/riscv/kernel/Makefile | 3 +-
arch/riscv/kernel/compat_signal.c | 2 +-
arch/riscv/kernel/compat_vdso/.gitignore | 2 -
arch/riscv/kernel/compat_vdso/compat_vdso.S | 8 -
.../kernel/compat_vdso/compat_vdso.lds.S | 3 -
arch/riscv/kernel/compat_vdso/flush_icache.S | 3 -
arch/riscv/kernel/compat_vdso/getcpu.S | 3 -
arch/riscv/kernel/compat_vdso/note.S | 3 -
arch/riscv/kernel/compat_vdso/rt_sigreturn.S | 3 -
arch/riscv/kernel/cpu.c | 4 +-
arch/riscv/kernel/cpu_ops_sbi.c | 4 +-
arch/riscv/kernel/cpufeature.c | 4 +-
arch/riscv/kernel/entry.S | 24 +--
arch/riscv/kernel/head.S | 8 +-
arch/riscv/kernel/process.c | 8 +-
arch/riscv/kernel/sbi.c | 24 +--
arch/riscv/kernel/signal.c | 6 +-
arch/riscv/kernel/traps.c | 4 +-
arch/riscv/kernel/vdso.c | 4 +-
arch/riscv/kernel/vdso/Makefile | 176 ++++++++++++------
..._vdso_offsets.sh => gen_vdso32_offsets.sh} | 2 +-
.../gen_vdso64_offsets.sh} | 2 +-
arch/riscv/kernel/vdso/vgettimeofday.c | 39 +++-
arch/riscv/kernel/vdso32.S | 8 +
arch/riscv/kernel/{vdso/vdso.S => vdso64.S} | 8 +-
arch/riscv/kvm/Kconfig | 1 +
arch/riscv/lib/Makefile | 1 +
arch/riscv/lib/memset.S | 4 +-
arch/riscv/mm/context.c | 16 +-
arch/riscv/mm/fault.c | 13 +-
arch/riscv/mm/init.c | 29 ++-
arch/riscv/net/Makefile | 6 +-
arch/riscv/net/bpf_jit_comp64.c | 10 +-
drivers/clocksource/timer-riscv.c | 2 +-
drivers/irqchip/irq-riscv-intc.c | 4 +-
fs/namei.c | 2 +-
58 files changed, 675 insertions(+), 317 deletions(-)
create mode 100644 arch/riscv/configs/64ilp32.config
delete mode 100644 arch/riscv/kernel/compat_vdso/.gitignore
delete mode 100644 arch/riscv/kernel/compat_vdso/compat_vdso.S
delete mode 100644 arch/riscv/kernel/compat_vdso/compat_vdso.lds.S
delete mode 100644 arch/riscv/kernel/compat_vdso/flush_icache.S
delete mode 100644 arch/riscv/kernel/compat_vdso/getcpu.S
delete mode 100644 arch/riscv/kernel/compat_vdso/note.S
delete mode 100644 arch/riscv/kernel/compat_vdso/rt_sigreturn.S
rename arch/riscv/kernel/vdso/{gen_vdso_offsets.sh => gen_vdso32_offsets.sh} (78%)
rename arch/riscv/kernel/{compat_vdso/gen_compat_vdso_offsets.sh => vdso/gen_vdso64_offsets.sh} (77%)
create mode 100644 arch/riscv/kernel/vdso32.S
rename arch/riscv/kernel/{vdso/vdso.S => vdso64.S} (73%)

--
2.36.1