Re: [RFC PATCH] ARM: dts: stm32: remove typec port dtbs_check warning on stm32mp15xx-dkx

From: Alexandre TORGUE
Date: Tue May 16 2023 - 12:28:05 EST



On 4/12/23 17:13, Fabrice Gasnier wrote:
According to usb-connector.yaml, typec connector should always use:
- ports property
- with port@0 (required).
This is also true for a single HS port. This removes dtbs_check warning:
stusb1600@28: connector: Unevaluated properties are not allowed ('port'
was unexpected)

Downside is it introduces another warning when building with W=1:

Warning (graph_child_address): /soc/i2c@5c002000/stusb1600@28/connector/
ports: graph node has single child node 'port@0', #address-cells
/#size-cells are not necessary

By removing #address-cells/#size-cells as suggested, another couple of
W=1 warning shows up:
Warning (avoid_default_addr_size): /soc/i2c@5c002000/stusb1600@28/
connector/ports/port@0: Relying on default #address-cells value
Warning (avoid_default_addr_size): /soc/i2c@5c002000/stusb1600@28/
connector/ports/port@0: Relying on default #size-cells value

Is there a clean way or necessary change to reach a clean build and clean
dtbs_check ?
Maybe this kind of concern has already been addressed ?
As far as I understand, the OF graph allows a single port {} node (e.g.
code being reworked here). Could this be added in relevant dtschema, to
address the single HS port use case (usb-connector.yaml) ?


Rob, Krzysztof, do you an idea to figure out this issue ?

Thanks in advance
Alex


Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
---
arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index cefeeb00fc22..41e79c8cc752 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -259,9 +259,14 @@ connector {
power-role = "dual";
typec-power-opmode = "default";
- port {
- con_usbotg_hs_ep: endpoint {
- remote-endpoint = <&usbotg_hs_ep>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ con_usbotg_hs_ep: endpoint {
+ remote-endpoint = <&usbotg_hs_ep>;
+ };
};
};
};