[PATCH v5 0/3] Support Honeywell mprls0025pa pressure sensor

[Andreas Klinger]

Support Honeywell mprls0025pa pressure sensor.

This patch series adds support for Honeywell mprls0025pa pressure sensor series.
There are a variety of sensors with different pressure ranges supported.

Changes in v5:
- Patch 1: "dt-bindings: iio: pressure: Support Honeywell mprls0025pa sensor"
  - add Reviewd-by tag
  - preserve formating in description
- Patch 2: "iio: pressure: Honeywell mprls0025pa pressure sensor"
  - make use of div_s64_rem()
  - document calculation
  - reorder includes
  - use NANO from units.h
- Patch 3: "MAINTAINERS: Add Honeywell mprls0025pa sensor"
  - no changes

Changes in v4:
- Patch 1: "dt-bindings: iio: pressure: Support Honeywell mprls0025pa sensor"
  - change line length to 80 characters
  - make vdd-supply mandatory
- Patch 2: "iio: pressure: Honeywell mprls0025pa pressure sensor"
  - change line length to 80 characters
  - change regulator vcc to devm_regulator_get_enable()
  - switch to probe_new
  - many changes from the review
- Patch 3: "MAINTAINERS: Add Honeywell mprls0025pa sensor"
  - no changes

Changes in v3:
- Patch 1: "dt-bindings: iio: pressure: Support Honeywell mprls0025pa sensor"
  - fix errors while doing dt_binding_check
  - add vdd-supply
- Patch 2: "iio: pressure: Honeywell mpr pressure sensor"
  - change to _RAW interface
  - add transfer function
  - add regulator
  - move to device_property_xxx functions
  - many more changes from the feedbacks
- Patch 3: "MAINTAINERS: Add Honeywell mpr sensor"
  - change file names

Changes in v2:
- Patch 1: "dt-bindings: iio: pressure: Support Honeywell mprls0025pa sensor"
  - change the global sensor decription of mpr to the specific sensor
    mprls0025pa
  - change compatible string
  - rename the file to honeywell,mprls0025pa.yaml
  - honeywell,pmin-pascal and honeywell,pmax-pascal: add unit pascal to property
    names 
  - add new property honeywell,transfer-function
- Patch 2: "iio: pressure: Honeywell mpr pressure sensor"
  - no change so far
  - will be changed and send out as new version when the dt definition is
    settled down
- Patch 3: "MAINTAINERS: Add Honeywell mpr sensor"
  - no change so far

Andreas Klinger (3):
  dt-bindings: iio: pressure: Support Honeywell mprls0025pa sensor
  iio: pressure: Honeywell mprls0025pa pressure sensor
  MAINTAINERS: Add Honeywell mprls0025pa sensor

 .../iio/pressure/honeywell,mprls0025pa.yaml   | 104 ++++
 MAINTAINERS                                   |   7 +
 drivers/iio/pressure/Kconfig                  |  13 +
 drivers/iio/pressure/Makefile                 |   1 +
 drivers/iio/pressure/mprls0025pa.c            | 450 ++++++++++++++++++
 5 files changed, 575 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
 create mode 100644 drivers/iio/pressure/mprls0025pa.c


base-commit: 457391b0380335d5e9a5babdec90ac53928b23b4
-- 
2.30.2