Re: [PATCH net-next v3 0/3] Support for Wake-on-LAN for Broadcom PHYs

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (main)
by David S. Miller <davem@xxxxxxxxxxxxx>:

On Thu, 11 May 2023 10:21:07 -0700 you wrote:
> This patch series adds support for Wake-on-LAN to the Broadcom PHY
> driver. Specifically the BCM54210E/B50212E are capable of supporting
> Wake-on-LAN using an external pin typically wired up to a system's GPIO.
> 
> These PHY operate a programmable Ethernet MAC destination address
> comparator which will fire up an interrupt whenever a match is received.
> Because of that, it was necessary to introduce patch #1 which allows the
> PHY driver's ->suspend() routine to be called unconditionally. This is
> necessary in our case because we need a hook point into the device
> suspend/resume flow to enable the wake-up interrupt as late as possible.
> 
> [...]

Here is the summary with links:
  - [net-next,v3,1/3] net: phy: Allow drivers to always call into ->suspend()
    https://git.kernel.org/netdev/net-next/c/a7e3448086d5
  - [net-next,v3,2/3] net: phy: broadcom: Add support for Wake-on-LAN
    https://git.kernel.org/netdev/net-next/c/8baddaa9d4ba
  - [net-next,v3,3/3] net: bcmgenet: Add support for PHY-based Wake-on-LAN
    https://git.kernel.org/netdev/net-next/c/7e400ff35cbe

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html