[PATCH v3 2/2] PCI: rcar-host: add support for optional regulators

From: Wolfram Sang
Date: Fri May 12 2023 - 03:53:19 EST


The KingFisher board has regulators. They just need to be en-/disabled,
so we can leave the handling to devm. Order variables in reverse-xmas
while we are here.

Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
Changes since v2:

* return directly with dev_err_probe
* reworded the error message to avoid repeating 'error'

drivers/pci/controller/pcie-rcar-host.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pcie-rcar-host.c b/drivers/pci/controller/pcie-rcar-host.c
index e80e56b2a842..f4b31d206634 100644
--- a/drivers/pci/controller/pcie-rcar-host.c
+++ b/drivers/pci/controller/pcie-rcar-host.c
@@ -29,6 +29,7 @@
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>

#include "pcie-rcar.h"

@@ -974,14 +975,20 @@ static const struct of_device_id rcar_pcie_of_match[] = {
{},
};

+/* Design note 346 from Linear Technology says order is not important */
+static const char * const rcar_pcie_supplies[] = {
+ "vpcie12v", "vpcie3v3", "vpcie1v5"
+};
+
static int rcar_pcie_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
+ struct pci_host_bridge *bridge;
struct rcar_pcie_host *host;
struct rcar_pcie *pcie;
+ unsigned int i;
u32 data;
int err;
- struct pci_host_bridge *bridge;

bridge = devm_pci_alloc_host_bridge(dev, sizeof(*host));
if (!bridge)
@@ -992,6 +999,13 @@ static int rcar_pcie_probe(struct platform_device *pdev)
pcie->dev = dev;
platform_set_drvdata(pdev, host);

+ for (i = 0; i < ARRAY_SIZE(rcar_pcie_supplies); i++) {
+ err = devm_regulator_get_enable_optional(dev, rcar_pcie_supplies[i]);
+ if (err < 0 && err != -ENODEV)
+ return dev_err_probe(dev, err, "can't enable regulator %s\n",
+ rcar_pcie_supplies[i]);
+ }
+
pm_runtime_enable(pcie->dev);
err = pm_runtime_get_sync(pcie->dev);
if (err < 0) {
--
2.30.2