Re: [PATCH 1/3] ARM: dts: qcom: msm8226: Use XO from rpmcc where possible

[Konrad Dybcio]

On 9.05.2023 23:16, Luca Weiss wrote:
> The xo clock being used everywhere actually goes via the RPM. Since the
> rpmcc driver recently got support for this clock we can use this now.
> 
> Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>  arch/arm/boot/dts/qcom-msm8226.dtsi | 11 ++++++-----
>  1 file changed, 6 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
> index 42acb9ddb8cc..4dd4e26c73a2 100644
> --- a/arch/arm/boot/dts/qcom-msm8226.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
> @@ -176,7 +176,7 @@ sdhc_1: mmc@f9824900 {
>  			interrupt-names = "hc_irq", "pwr_irq";
>  			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
>  				 <&gcc GCC_SDCC1_APPS_CLK>,
> -				 <&xo_board>;
> +				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
>  			clock-names = "iface", "core", "xo";
>  			pinctrl-names = "default";
>  			pinctrl-0 = <&sdhc1_default_state>;
> @@ -192,7 +192,7 @@ sdhc_2: mmc@f98a4900 {
>  			interrupt-names = "hc_irq", "pwr_irq";
>  			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
>  				 <&gcc GCC_SDCC2_APPS_CLK>,
> -				 <&xo_board>;
> +				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
>  			clock-names = "iface", "core", "xo";
>  			pinctrl-names = "default";
>  			pinctrl-0 = <&sdhc2_default_state>;
> @@ -208,7 +208,7 @@ sdhc_3: mmc@f9864900 {
>  			interrupt-names = "hc_irq", "pwr_irq";
>  			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
>  				 <&gcc GCC_SDCC3_APPS_CLK>,
> -				 <&xo_board>;
> +				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
>  			clock-names = "iface", "core", "xo";
>  			pinctrl-names = "default";
>  			pinctrl-0 = <&sdhc3_default_state>;
> @@ -362,7 +362,8 @@ usb_hs_phy: phy {
>  					compatible = "qcom,usb-hs-phy-msm8226",
>  						     "qcom,usb-hs-phy";
>  					#phy-cells = <0>;
> -					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
> +					clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
> +						 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
>  					clock-names = "ref", "sleep";
>  					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
>  					reset-names = "phy", "por";
> @@ -617,7 +618,7 @@ adsp: remoteproc@fe200000 {
>  			power-domains = <&rpmpd MSM8226_VDDCX>;
>  			power-domain-names = "cx";
>  
> -			clocks = <&xo_board>;
> +			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
>  			clock-names = "xo";
>  
>  			memory-region = <&adsp_region>;
>