Re: [PATCH v6 5/8] drm/msm/dpu: add support for DSC encoder v1.2 engine

From: Dmitry Baryshkov
Date: Thu May 11 2023 - 00:52:38 EST


On 11/05/2023 01:07, Kuogee Hsieh wrote:
Add support for DSC 1.2 by providing the necessary hooks to program
the DPU DSC 1.2 encoder.

Changes in v3:
-- fixed kernel test rebot report that "__iomem *off" is declared but not
used at dpu_hw_dsc_config_1_2()
-- unrolling thresh loops

Changes in v4:
-- delete DPU_DSC_HW_REV_1_1
-- delete off and used real register name directly

Reported-by: kernel test robot <lkp@xxxxxxxxx>
Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
---
drivers/gpu/drm/msm/Makefile | 1 +
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 32 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h | 14 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c | 385 +++++++++++++++++++++++++
drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c | 7 +-
5 files changed, 435 insertions(+), 4 deletions(-)
create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c

diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index b814fc8..b9af5e4 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -65,6 +65,7 @@ msm-$(CONFIG_DRM_MSM_DPU) += \
disp/dpu1/dpu_hw_catalog.o \
disp/dpu1/dpu_hw_ctl.o \
disp/dpu1/dpu_hw_dsc.o \
+ disp/dpu1/dpu_hw_dsc_1_2.o \
disp/dpu1/dpu_hw_interrupts.o \
disp/dpu1/dpu_hw_intf.o \
disp/dpu1/dpu_hw_lm.o \
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index dc0a4da..4eda2cc 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
- * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2022-2023, Qualcomm Innovation Center, Inc. All rights reserved.
* Copyright (c) 2015-2018, 2020 The Linux Foundation. All rights reserved.
*/
@@ -244,12 +244,18 @@ enum {
};
/**
- * DSC features
+ * DSC sub-blocks/features
* @DPU_DSC_OUTPUT_CTRL Configure which PINGPONG block gets
* the pixel output from this DSC.
+ * @DPU_DSC_HW_REV_1_2 DSC block supports dsc 1.1 and 1.2
+ * @DPU_DSC_NATIVE_422_EN Supports native422 and native420 encoding
+ * @DPU_DSC_MAX
*/
enum {
DPU_DSC_OUTPUT_CTRL = 0x1,
+ DPU_DSC_HW_REV_1_2,
+ DPU_DSC_NATIVE_422_EN,
+ DPU_DSC_MAX
};
/**
@@ -306,6 +312,14 @@ struct dpu_pp_blk {
};
/**
+ * struct dpu_dsc_blk - DSC Encoder sub-blk information
+ * @info: HW register and features supported by this sub-blk
+ */
+struct dpu_dsc_blk {
+ DPU_HW_SUBBLK_INFO;
+};
+
+/**
* enum dpu_qos_lut_usage - define QoS LUT use cases
*/
enum dpu_qos_lut_usage {
@@ -452,6 +466,17 @@ struct dpu_pingpong_sub_blks {
};
/**
+ * struct dpu_dsc_sub_blks - DSC sub-blks
+ * @enc: DSC encoder sub block
+ * @ctl: DSC controller sub block
+ *
+ */
+struct dpu_dsc_sub_blks {
+ struct dpu_dsc_blk enc;
+ struct dpu_dsc_blk ctl;
+};
+
+/**
* dpu_clk_ctrl_type - Defines top level clock control signals
*/
enum dpu_clk_ctrl_type {
@@ -605,10 +630,13 @@ struct dpu_merge_3d_cfg {
* struct dpu_dsc_cfg - information of DSC blocks
* @id enum identifying this block
* @base register offset of this block
+ * @len: length of hardware block
* @features bit mask identifying sub-blocks/features
+ * @sblk sub-blocks information
*/
struct dpu_dsc_cfg {
DPU_HW_BLK_INFO;
+ const struct dpu_dsc_sub_blks *sblk;
};
/**
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
index 138080a..bdff74d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
@@ -1,5 +1,8 @@
/* SPDX-License-Identifier: GPL-2.0-only */
-/* Copyright (c) 2020-2022, Linaro Limited */
+/*
+ * Copyright (c) 2020-2022, Linaro Limited
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved
+ */
#ifndef _DPU_HW_DSC_H
#define _DPU_HW_DSC_H
@@ -69,6 +72,15 @@ struct dpu_hw_dsc *dpu_hw_dsc_init(const struct dpu_dsc_cfg *cfg,
void __iomem *addr);
/**
+ * dpu_hw_dsc_init_1_2 - initializes the v1.2 DSC hw driver block
+ * @cfg: DSC catalog entry for which driver object is required
+ * @addr: Mapped register io address of MDP
+ * Returns: Error code or allocated dpu_hw_dsc context
+ */
+struct dpu_hw_dsc *dpu_hw_dsc_init_1_2(const struct dpu_dsc_cfg *cfg,
+ void __iomem *addr);
+
+/**
* dpu_hw_dsc_destroy - destroys dsc driver context
* @dsc: Pointer to dsc driver context returned by dpu_hw_dsc_init
*/
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
new file mode 100644
index 00000000..0c77c85
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
@@ -0,0 +1,385 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved
+ */
+
+#include <drm/display/drm_dsc_helper.h>
+
+#include "dpu_kms.h"
+#include "dpu_hw_catalog.h"
+#include "dpu_hwio.h"
+#include "dpu_hw_mdss.h"
+#include "dpu_hw_dsc.h"
+
+#define DSC_CMN_MAIN_CNF 0x00
+
+/* DPU_DSC_ENC register offsets */
+#define ENC_DF_CTRL 0x00
+#define ENC_GENERAL_STATUS 0x04
+#define ENC_HSLICE_STATUS 0x08
+#define ENC_OUT_STATUS 0x0C
+#define ENC_INT_STAT 0x10
+#define ENC_INT_CLR 0x14
+#define ENC_INT_MASK 0x18
+#define DSC_MAIN_CONF 0x30
+#define DSC_PICTURE_SIZE 0x34
+#define DSC_SLICE_SIZE 0x38
+#define DSC_MISC_SIZE 0x3C
+#define DSC_HRD_DELAYS 0x40
+#define DSC_RC_SCALE 0x44
+#define DSC_RC_SCALE_INC_DEC 0x48
+#define DSC_RC_OFFSETS_1 0x4C
+#define DSC_RC_OFFSETS_2 0x50
+#define DSC_RC_OFFSETS_3 0x54
+#define DSC_RC_OFFSETS_4 0x58
+#define DSC_FLATNESS_QP 0x5C
+#define DSC_RC_MODEL_SIZE 0x60
+#define DSC_RC_CONFIG 0x64
+#define DSC_RC_BUF_THRESH_0 0x68
+#define DSC_RC_BUF_THRESH_1 0x6C
+#define DSC_RC_BUF_THRESH_2 0x70
+#define DSC_RC_BUF_THRESH_3 0x74
+#define DSC_RC_MIN_QP_0 0x78
+#define DSC_RC_MIN_QP_1 0x7C
+#define DSC_RC_MIN_QP_2 0x80
+#define DSC_RC_MAX_QP_0 0x84
+#define DSC_RC_MAX_QP_1 0x88
+#define DSC_RC_MAX_QP_2 0x8C
+#define DSC_RC_RANGE_BPG_OFFSETS_0 0x90
+#define DSC_RC_RANGE_BPG_OFFSETS_1 0x94
+#define DSC_RC_RANGE_BPG_OFFSETS_2 0x98
+
+/* DPU_DSC_CTL register offsets */
+#define DSC_CTL 0x00
+#define DSC_CFG 0x04
+#define DSC_DATA_IN_SWAP 0x08
+#define DSC_CLK_CTRL 0x0C
+
+static inline int _dsc_calc_ob_max_addr(struct dpu_hw_dsc *hw_dsc, int num_ss)
+{
+ int max_addr = 2400 / num_ss;
+
+ if (hw_dsc->caps->features & BIT(DPU_DSC_NATIVE_422_EN))
+ max_addr /= 2;
+
+ return max_addr - 1;
+};
+
+static inline void dpu_hw_dsc_disable_1_2(struct dpu_hw_dsc *hw_dsc)
+{
+ struct dpu_hw_blk_reg_map *hw;
+ u32 offset;
+
+ if (!hw_dsc)
+ return;
+
+ hw = &hw_dsc->hw;
+ offset = hw_dsc->caps->sblk->ctl.base;
+ DPU_REG_WRITE(hw, offset + DSC_CFG, 0);
+
+ offset = hw_dsc->caps->sblk->enc.base;
+ DPU_REG_WRITE(hw, offset + ENC_DF_CTRL, 0);
+ DPU_REG_WRITE(hw, offset + DSC_MAIN_CONF, 0);

This has the same problem as before. By looking at this line you can not check where this write is targeted. Instead I'd suggest storing sblk in the local variable and then using something like:

DPU_REG_WRITE(hw, sblk->ctl.base + DSC_CFG, 0);

Same applies to other functions in this patch.

+}
+
+static inline void dpu_hw_dsc_config_1_2(struct dpu_hw_dsc *hw_dsc,
+ struct drm_dsc_config *dsc,
+ u32 mode,
+ u32 initial_lines)

Please indent to the opening brace. If using Vim, this is the "set cino=(0" setting

+{
+ struct dpu_hw_blk_reg_map *hw;
+ u32 offset;
+ u32 data = 0;
+ u32 det_thresh_flatness;
+ u32 num_active_ss_per_enc;

s/_ss_/_slice_/g

+ u32 bpp;
+
+ if (!hw_dsc || !dsc)
+ return;
+
+ hw = &hw_dsc->hw;
+
+ offset = hw_dsc->caps->sblk->enc.base;
+
+ if (mode & DSC_MODE_SPLIT_PANEL)
+ data |= BIT(0);
+
+ if (mode & DSC_MODE_MULTIPLEX)
+ data |= BIT(1);
+
+ num_active_ss_per_enc = dsc->slice_count;
+ if (mode & DSC_MODE_MULTIPLEX)
+ num_active_ss_per_enc = dsc->slice_count >> 1;
+
+ data |= (num_active_ss_per_enc & 0x3) << 7;
+
+ DPU_REG_WRITE(hw, DSC_CMN_MAIN_CNF, data);
+
+ data = (initial_lines & 0xff);
+
+ if (mode & DSC_MODE_VIDEO)
+ data |= BIT(9);
+
+ data |= (_dsc_calc_ob_max_addr(hw_dsc, num_active_ss_per_enc) << 18);
+
+ DPU_REG_WRITE(hw, offset + ENC_DF_CTRL, data);
+
+ data = (dsc->dsc_version_minor & 0xf) << 28;
+ if (dsc->dsc_version_minor == 0x2) {
+ if (dsc->native_422)
+ data |= BIT(22);
+ if (dsc->native_420)
+ data |= BIT(21);
+ }
+
+ bpp = dsc->bits_per_pixel;
+ /* as per hw requirement bpp should be programmed
+ * twice the actual value in case of 420 or 422 encoding
+ */
+ if (dsc->native_422 || dsc->native_420)
+ bpp = 2 * bpp;
+ data |= (dsc->block_pred_enable ? 1 : 0) << 20;
+ data |= bpp << 10;
+ data |= (dsc->line_buf_depth & 0xf) << 6;
+ data |= dsc->convert_rgb << 4;
+ data |= dsc->bits_per_component & 0xf;
+
+ DPU_REG_WRITE(hw, offset + DSC_MAIN_CONF, data);
+
+ data = (dsc->pic_width & 0xffff) |
+ ((dsc->pic_height & 0xffff) << 16);
+
+ DPU_REG_WRITE(hw, offset + DSC_PICTURE_SIZE, data);
+
+ data = (dsc->slice_width & 0xffff) |
+ ((dsc->slice_height & 0xffff) << 16);
+
+ DPU_REG_WRITE(hw, offset + DSC_SLICE_SIZE, data);
+
+ DPU_REG_WRITE(hw, offset + DSC_MISC_SIZE,
+ (dsc->slice_chunk_size) & 0xffff);
+
+ data = (dsc->initial_xmit_delay & 0xffff) |
+ ((dsc->initial_dec_delay & 0xffff) << 16);
+
+ DPU_REG_WRITE(hw, offset + DSC_HRD_DELAYS, data);
+
+ DPU_REG_WRITE(hw, offset + DSC_RC_SCALE,
+ dsc->initial_scale_value & 0x3f);
+
+ data = (dsc->scale_increment_interval & 0xffff) |
+ ((dsc->scale_decrement_interval & 0x7ff) << 16);
+
+ DPU_REG_WRITE(hw, offset + DSC_RC_SCALE_INC_DEC, data);
+
+ data = (dsc->first_line_bpg_offset & 0x1f) |
+ ((dsc->second_line_bpg_offset & 0x1f) << 5);
+
+ DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_1, data);
+
+ data = (dsc->nfl_bpg_offset & 0xffff) |
+ ((dsc->slice_bpg_offset & 0xffff) << 16);
+
+ DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_2, data);
+
+ data = (dsc->initial_offset & 0xffff) |
+ ((dsc->final_offset & 0xffff) << 16);
+
+ DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_3, data);
+
+ data = (dsc->nsl_bpg_offset & 0xffff) |
+ ((dsc->second_line_offset_adj & 0xffff) << 16);
+
+ DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_4, data);
+
+ data = (dsc->flatness_min_qp & 0x1f);
+ data |= (dsc->flatness_max_qp & 0x1f) << 5;
+
+ det_thresh_flatness = drm_dsc_calculate_flatness_det_thresh(dsc);
+ data |= (det_thresh_flatness & 0xff) << 10;
+
+ DPU_REG_WRITE(hw, offset + DSC_FLATNESS_QP, data);
+
+ DPU_REG_WRITE(hw, offset + DSC_RC_MODEL_SIZE,
+ (dsc->rc_model_size) & 0xffff);
+
+ data = dsc->rc_edge_factor & 0xf;
+ data |= (dsc->rc_quant_incr_limit0 & 0x1f) << 8;
+ data |= (dsc->rc_quant_incr_limit1 & 0x1f) << 13;
+ data |= (dsc->rc_tgt_offset_high & 0xf) << 20;
+ data |= (dsc->rc_tgt_offset_low & 0xf) << 24;

FIELD_PREP should become our friend. As the DPU driver does not use generated headers/helpers, we should probably enforce its usage all over the code.

+
+ DPU_REG_WRITE(hw, offset + DSC_RC_CONFIG, data);
+
+ /* program the dsc wrapper */
+ offset = hw_dsc->caps->sblk->ctl.base;
+
+ data = BIT(0); /* encoder enable */
+ if (dsc->native_422)
+ data |= BIT(8);
+ else if (dsc->native_420)
+ data |= BIT(9);
+ if (!dsc->convert_rgb)
+ data |= BIT(10);
+ if (dsc->bits_per_component == 8)
+ data |= BIT(11);
+ if (mode & DSC_MODE_SPLIT_PANEL)
+ data |= BIT(12);
+ if (mode & DSC_MODE_MULTIPLEX)
+ data |= BIT(13);
+ if (!(mode & DSC_MODE_VIDEO))
+ data |= BIT(17);
+
+ DPU_REG_WRITE(hw, offset + DSC_CFG, data);
+}
+
+static inline void dpu_hw_dsc_config_thresh_1_2(struct dpu_hw_dsc *hw_dsc,
+ struct drm_dsc_config *dsc)

indent

+{
+ struct dpu_hw_blk_reg_map *hw;
+ u32 offset;
+ struct drm_dsc_rc_range_parameters *rc;
+
+ if (!hw_dsc || !dsc)
+ return;
+
+ offset = hw_dsc->caps->sblk->enc.base;
+
+ hw = &hw_dsc->hw;
+
+ rc = dsc->rc_range_params;
+
+ /*
+ * With BUF_THRESH -- 14 in total
+ * each register contains 4 thresh values with the last register
+ * containing only 2 thresh values
+ */
+ DPU_REG_WRITE(hw, offset + DSC_RC_BUF_THRESH_0,
+ (dsc->rc_buf_thresh[0] << 0) |
+ (dsc->rc_buf_thresh[1] << 8) |
+ (dsc->rc_buf_thresh[2] << 16) |
+ (dsc->rc_buf_thresh[3] << 24));
+ DPU_REG_WRITE(hw, offset + DSC_RC_BUF_THRESH_1,
+ (dsc->rc_buf_thresh[4] << 0) |
+ (dsc->rc_buf_thresh[5] << 8) |
+ (dsc->rc_buf_thresh[6] << 16) |
+ (dsc->rc_buf_thresh[7] << 24));
+ DPU_REG_WRITE(hw, offset + DSC_RC_BUF_THRESH_2,
+ (dsc->rc_buf_thresh[8] << 0) |
+ (dsc->rc_buf_thresh[9] << 8) |
+ (dsc->rc_buf_thresh[10] << 16) |
+ (dsc->rc_buf_thresh[11] << 24));
+ DPU_REG_WRITE(hw, offset + DSC_RC_BUF_THRESH_3,
+ (dsc->rc_buf_thresh[12] << 0) |
+ (dsc->rc_buf_thresh[13] << 8));
+
+ /*
+ * with min/max_QP -- 5 bits each
+ * each register contains 5 min_qp or max_qp for total of 15
+ *
+ * With BPG_OFFSET -- 6 bits each
+ * each register contains 5 BPG_offset for total of 15
+ */
+ DPU_REG_WRITE(hw, offset + DSC_RC_MIN_QP_0,
+ (rc[0].range_min_qp << 0) |
+ (rc[1].range_min_qp << 5) |
+ (rc[2].range_min_qp << 10) |
+ (rc[3].range_min_qp << 15) |
+ (rc[4].range_min_qp << 20));

This is over-indented.

+ DPU_REG_WRITE(hw, offset + DSC_RC_MAX_QP_0,
+ (rc[0].range_max_qp << 0) |
+ (rc[1].range_max_qp << 5) |
+ (rc[2].range_max_qp << 10) |
+ (rc[3].range_max_qp << 15) |
+ (rc[4].range_max_qp << 20));
+ DPU_REG_WRITE(hw, offset + DSC_RC_RANGE_BPG_OFFSETS_0,
+ (rc[0].range_bpg_offset << 0) |
+ (rc[1].range_bpg_offset << 6) |
+ (rc[2].range_bpg_offset << 12) |
+ (rc[3].range_bpg_offset << 18) |
+ (rc[4].range_bpg_offset << 24));
+
+ DPU_REG_WRITE(hw, offset + DSC_RC_MIN_QP_1,
+ (rc[5].range_min_qp << 0) |
+ (rc[6].range_min_qp << 5) |
+ (rc[7].range_min_qp << 10) |
+ (rc[8].range_min_qp << 15) |
+ (rc[9].range_min_qp << 20));
+ DPU_REG_WRITE(hw, offset + DSC_RC_MAX_QP_1,
+ (rc[5].range_max_qp << 0) |
+ (rc[6].range_max_qp << 5) |
+ (rc[7].range_max_qp << 10) |
+ (rc[8].range_max_qp << 15) |
+ (rc[9].range_max_qp << 20));
+ DPU_REG_WRITE(hw, offset + DSC_RC_RANGE_BPG_OFFSETS_1,
+ (rc[5].range_bpg_offset << 0) |
+ (rc[6].range_bpg_offset << 6) |
+ (rc[7].range_bpg_offset << 12) |
+ (rc[8].range_bpg_offset << 18) |
+ (rc[9].range_bpg_offset << 24));
+
+ DPU_REG_WRITE(hw, offset + DSC_RC_MIN_QP_2,
+ (rc[10].range_min_qp << 0) |
+ (rc[11].range_min_qp << 5) |
+ (rc[12].range_min_qp << 10) |
+ (rc[13].range_min_qp << 15) |
+ (rc[14].range_min_qp << 20));
+ DPU_REG_WRITE(hw, offset + DSC_RC_MAX_QP_2,
+ (rc[10].range_max_qp << 0) |
+ (rc[11].range_max_qp << 5) |
+ (rc[12].range_max_qp << 10) |
+ (rc[13].range_max_qp << 15) |
+ (rc[14].range_max_qp << 20));
+ DPU_REG_WRITE(hw, offset + DSC_RC_RANGE_BPG_OFFSETS_2,
+ (rc[10].range_bpg_offset << 0) |
+ (rc[11].range_bpg_offset << 6) |
+ (rc[12].range_bpg_offset << 12) |
+ (rc[13].range_bpg_offset << 18) |
+ (rc[14].range_bpg_offset << 24));
+}
+
+static inline void dpu_hw_dsc_bind_pingpong_blk_1_2(
+ struct dpu_hw_dsc *hw_dsc,
+ const enum dpu_pingpong pp)
+{
+ struct dpu_hw_blk_reg_map *hw;
+ int offset;
+ int mux_cfg = 0xf; /* Disabled */
+
+ offset = hw_dsc->caps->sblk->ctl.base;
+
+ hw = &hw_dsc->hw;
+ if (pp)
+ mux_cfg = (pp - PINGPONG_0) & 0x7;
+
+ DPU_REG_WRITE(hw, offset + DSC_CTL, mux_cfg);
+}
+
+static void _setup_dcs_ops_1_2(struct dpu_hw_dsc_ops *ops,
+ const unsigned long features)
+{
+ ops->dsc_disable = dpu_hw_dsc_disable_1_2;
+ ops->dsc_config = dpu_hw_dsc_config_1_2;
+ ops->dsc_config_thresh = dpu_hw_dsc_config_thresh_1_2;
+ ops->dsc_bind_pingpong_blk = dpu_hw_dsc_bind_pingpong_blk_1_2;
+}
+
+struct dpu_hw_dsc *dpu_hw_dsc_init_1_2(const struct dpu_dsc_cfg *cfg,
+ void __iomem *addr)
+{
+ struct dpu_hw_dsc *c;
+
+ c = kzalloc(sizeof(*c), GFP_KERNEL);
+ if (!c)
+ return ERR_PTR(-ENOMEM);
+
+ c->hw.blk_addr = addr + cfg->base;
+ c->hw.log_mask = DPU_DBG_MASK_DSC;
+
+ c->idx = cfg->id;
+ c->caps = cfg;
+ _setup_dcs_ops_1_2(&c->ops, c->caps->features);
+
+ return c;
+}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
index f0fc704..502dd60 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#define pr_fmt(fmt) "[drm:%s] " fmt, __func__
@@ -246,7 +247,11 @@ int dpu_rm_init(struct dpu_rm *rm,
struct dpu_hw_dsc *hw;
const struct dpu_dsc_cfg *dsc = &cat->dsc[i];
- hw = dpu_hw_dsc_init(dsc, mmio);
+ if (test_bit(DPU_DSC_HW_REV_1_2, &dsc->features))
+ hw = dpu_hw_dsc_init_1_2(dsc, mmio);
+ else
+ hw = dpu_hw_dsc_init(dsc, mmio);
+
if (IS_ERR_OR_NULL(hw)) {
rc = PTR_ERR(hw);
DPU_ERROR("failed dsc object creation: err %d\n", rc);

--
With best wishes
Dmitry