[PATCH] Input: synaptics-rmi4 - retry reading SMBus version on resume

[Jeffery Miller]

On resume there can be a period of time after the
preceding serio_resume -> psmouse_deactivate call
where calls to rmi_smb_get_version fail with
-ENXIO.

The call path in rmi_smb_resume is rmi_smb_resume -> rmi_smb_reset ->
rmi_smb_enable_smbus_mode -> rmi_smb_get_version where
this failure would occur.

Adding a retry loop ensures that after rmi_smb_reset returns
the following rmi_driver_resume calls in rmi_smbus_resume can
succeed.

This behavior was seen on a Lenovo T440p machine that required
a delay of approximately 7-12ms.
The retry limit of 5 is chosen to be larger than
this observed delay.

With this patch the trimmed resume logs look similar to:
```
psmouse serio1: PM: calling serio_resume+0x0/0x8c @ 5399, parent: i8042
[5399] libps2:__ps2_command:316: psmouse serio1: f5 [] - 0/00000000 []
psmouse serio1: PM: serio_resume+0x0/0x8c returned 0 after 3259 usecs
...
rmi4_smbus 0-002c: PM: calling rmi_smb_resume ... @ 5454, parent: i2c-0
...
[5454] i2c_i801:i801_check_post:414: i801_smbus 0000:00:1f.3: No response
smbus_result: i2c-0 a=02c f=0000 c=fd BYTE_DATA rd res=-6
rmi4_smbus 0-002c: failed to get SMBus version number!
rmi4_smbus 0-002c: sleeping to retry getting the SMBus version number
...
rmi4_smbus 0-002c: PM: rmi_smb_resume ... returned 0 after 21351 usecs
```

Signed-off-by: Jeffery Miller <jefferymiller@xxxxxxxxxx>
---

Early boot dmesg include:
```
rmi4_smbus 0-002c: registering SMbus-connected sensor
rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM2722-001, fw id: 0
```

The resume order looks correct. The `psmouse serio1` resume returns
before the rmi_smb_resume is called showing the patch from
https://lore.kernel.org/all/89456fcd-a113-4c82-4b10-a9bcaefac68f@xxxxxxxxxx/
is applied and working for that ordering.

I attempted to try to rule out some interaction between the concurrent
input resume calls for other i8042 devices.
Adding a 7ms delay after psmouse_deactivate which is called in the
preceding psmouse serio1 serio_resume function also allows
this version call to succeed.

If the rmi_smb_probe device_disable_async_suspend patch is applied
it will also avoid this issue. However the time between
the psmouse_deactivate call for serio_resume and rmi_smb_resume
was over 60ms on my test machine. This would naturally be long
enough to avoid this particular delay.


 drivers/input/rmi4/rmi_smbus.c | 23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/drivers/input/rmi4/rmi_smbus.c b/drivers/input/rmi4/rmi_smbus.c
index 4bf0e1df6a4a..386e80ae141b 100644
--- a/drivers/input/rmi4/rmi_smbus.c
+++ b/drivers/input/rmi4/rmi_smbus.c
@@ -43,15 +43,26 @@ static int rmi_smb_get_version(struct rmi_smb_xport *rmi_smb)
 {
 	struct i2c_client *client = rmi_smb->client;
 	int retval;
+	int tries = 0;
 
 	/* Check if for SMBus new version device by reading version byte. */
-	retval = i2c_smbus_read_byte_data(client, SMB_PROTOCOL_VERSION_ADDRESS);
-	if (retval < 0) {
-		dev_err(&client->dev, "failed to get SMBus version number!\n");
-		return retval;
-	}
+	do {
+		if (tries > 0) {
+			dev_warn(&client->dev, "sleeping to retry getting the SMBus version number\n");
+			fsleep(5000);
+		}
+		retval = i2c_smbus_read_byte_data(client,
+				SMB_PROTOCOL_VERSION_ADDRESS);
+		if (retval >= 0)
+			return retval + 1;
 
-	return retval + 1;
+		dev_err(&client->dev, "failed to get SMBus version number!\n");
+		/* On resume the read of the version can
+		 * momentarily return -ENXIO.
+		 * Retry to allow additional time for it to succeed.
+		 */
+	} while (retval == -ENXIO && tries++ < 5);
+	return retval;
 }
 
 /* SMB block write - wrapper over ic2_smb_write_block */
-- 
2.40.1.606.ga4b1b128d6-goog