Re: [PATCH 1/2] ASoC: dt-bindings: Add adi,ssm3515 amp schema

[Krzysztof Kozlowski]

On 09/05/2023 20:25, Conor Dooley wrote:
> Hey Martin,
> 
> On Tue, May 09, 2023 at 06:38:27PM +0200, Martin Povišer wrote:
>> Add a DT schema for the SSM3515 amp by Analog Devices. It's a simple
>> mono amplifier with digital input.
>>
>> Signed-off-by: Martin Povišer <povik+lin@xxxxxxxxxxx>
>> ---
>>  .../bindings/sound/adi,ssm3515.yaml           | 66 +++++++++++++++++++
>>  1 file changed, 66 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/sound/adi,ssm3515.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml b/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml
>> new file mode 100644
>> index 000000000000..19b7185ae8e2
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml
>> @@ -0,0 +1,66 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +# Copyright (C) 2019-20 Texas Instruments Incorporated
> 
> Copyright here looks a little odd, copy & paste from the TI bindings you
> send patches for earlier, or intended?
> 
>> +%YAML 1.2
>> +---
>> +$id: "http://devicetree.org/schemas/sound/adi,ssm3515.yaml#";
>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> 
> Drop the quotes on these please.
> 
>> +
>> +title: Analog Devices SSM3515 Audio Amplifier
>> +
>> +maintainers:
>> +  - Martin Povišer <povik+lin@xxxxxxxxxxx>
>> +
>> +description: |
>> +  SSM3515 is a mono Class-D audio amplifier with digital input.
>> +
>> +  https://www.analog.com/media/en/technical-documentation/data-sheets/SSM3515.pdf
>> +
>> +allOf:
>> +  - $ref: dai-common.yaml#
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - adi,ssm3515
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  adi,ana-gain:
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    enum: [0, 1, 2, 3]
>> +    description: |
>> +      The value to be set in the ANA_GAIN register field on the codec. This determines
>> +      the full voltage span of the codec's analog output.
>> +
>> +      To quote the datasheet on the available options:
>> +
>> +        00: 8.4 V Full-Scale Gain Mapping
>> +        01: 12.6 V Full-Scale Gain Mapping
>> +        10: 14 V Full-Scale Gain Mapping
>> +        11: 15 V Full-Scale Gain Mapping
> 
> Putting register values into the DT does not seem correct, although
> I know nothing about sound and will have to defer to Krzysztof & Co. on
> that front.

Depends whether these are really voltages or something else (e.g. gain)
just related to voltage.

Best regards,
Krzysztof