[PATCH v3 5/5] riscv: dts: starfive: jh7110: Add AON PMU node

[Changhuang Liang]

Add AON PMU node to configure power. It can be used to turn on/off dphy
rx/tx power switch. It also can use syscon operation.

Reviewed-by: Walker Chen <walker.chen@xxxxxxxxxxxxxxxx>
Signed-off-by: Changhuang Liang <changhuang.liang@xxxxxxxxxxxxxxxx>
---
 arch/riscv/boot/dts/starfive/jh7110.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 4c5fdb905da8..d31257d4dcfc 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -486,6 +486,12 @@ aoncrg: clock-controller@17000000 {
 			#reset-cells = <1>;
 		};
 
+		aon_syscon: syscon@17010000 {
+			compatible = "starfive,jh7110-aon-syscon", "syscon";
+			reg = <0x0 0x17010000 0x0 0x1000>;
+			#power-domain-cells = <1>;
+		};
+
 		aongpio: pinctrl@17020000 {
 			compatible = "starfive,jh7110-aon-pinctrl";
 			reg = <0x0 0x17020000 0x0 0x10000>;
-- 
2.25.1