Re: [PATCH V4 2/3] clk: qcom: videocc-sm8450: Add video clock controller driver for SM8450

[Dmitry Baryshkov]

On Tue, 9 May 2023 at 20:22, Taniya Das <quic_tdas@xxxxxxxxxxx> wrote:
>
> Add support for the video clock controller driver for peripheral clock
> clients to be able to request for video cc clocks.
>
> Signed-off-by: Taniya Das <quic_tdas@xxxxxxxxxxx>
> ---
> Changes since V3:
>  - Use lower case hex.
>  - Check the return value here and bail out early on failure in probe.
>
> Changes since V2:
>  - Update the header file name to match the latest upstream header
>    files.
>
> Changes since V1:
>  - Use DT indices instead of fw_name.
>  - Replace pm_runtime_enable with devm_pm_runtime_enable.
>  - Change license to GPL from GPL V2.
>
>  drivers/clk/qcom/Kconfig          |   9 +
>  drivers/clk/qcom/Makefile         |   1 +
>  drivers/clk/qcom/videocc-sm8450.c | 461 ++++++++++++++++++++++++++++++
>  3 files changed, 471 insertions(+)
>  create mode 100644 drivers/clk/qcom/videocc-sm8450.c

[skipped]


> +static const struct qcom_reset_map video_cc_sm8450_resets[] = {
> +       [CVP_VIDEO_CC_INTERFACE_BCR] = { 0x80e0 },
> +       [CVP_VIDEO_CC_MVS0_BCR] = { 0x8098 },
> +       [CVP_VIDEO_CC_MVS0C_BCR] = { 0x8048 },
> +       [CVP_VIDEO_CC_MVS1_BCR] = { 0x80bc },
> +       [CVP_VIDEO_CC_MVS1C_BCR] = { 0x8070 },

Can we have a common VIDEO_CC prefix here please?

> +       [VIDEO_CC_MVS0C_CLK_ARES] = { 0x8064, 2 },
> +       [VIDEO_CC_MVS1C_CLK_ARES] = { 0x808c, 2 },
> +};
> +
> +static const struct regmap_config video_cc_sm8450_regmap_config = {
> +       .reg_bits = 32,
> +       .reg_stride = 4,
> +       .val_bits = 32,
> +       .max_register = 0x9f4c,
> +       .fast_io = true,
> +};
> +
> +static struct qcom_cc_desc video_cc_sm8450_desc = {
> +       .config = &video_cc_sm8450_regmap_config,
> +       .clks = video_cc_sm8450_clocks,
> +       .num_clks = ARRAY_SIZE(video_cc_sm8450_clocks),
> +       .resets = video_cc_sm8450_resets,
> +       .num_resets = ARRAY_SIZE(video_cc_sm8450_resets),
> +       .gdscs = video_cc_sm8450_gdscs,
> +       .num_gdscs = ARRAY_SIZE(video_cc_sm8450_gdscs),
> +};
> +
> +static const struct of_device_id video_cc_sm8450_match_table[] = {
> +       { .compatible = "qcom,sm8450-videocc" },
> +       { }
> +};
> +MODULE_DEVICE_TABLE(of, video_cc_sm8450_match_table);
> +
> +static int video_cc_sm8450_probe(struct platform_device *pdev)
> +{
> +       struct regmap *regmap;
> +       int ret;
> +
> +       ret = devm_pm_runtime_enable(&pdev->dev);
> +       if (ret)
> +               return ret;
> +
> +       ret = pm_runtime_resume_and_get(&pdev->dev);
> +       if (ret)
> +               return ret;
> +
> +       regmap = qcom_cc_map(pdev, &video_cc_sm8450_desc);
> +       if (IS_ERR(regmap)) {
> +               pm_runtime_put(&pdev->dev);
> +               return PTR_ERR(regmap);
> +       }
> +
> +       clk_lucid_evo_pll_configure(&video_cc_pll0, regmap, &video_cc_pll0_config);
> +       clk_lucid_evo_pll_configure(&video_cc_pll1, regmap, &video_cc_pll1_config);
> +
> +       /*
> +        * Keep clocks always enabled:
> +        *      video_cc_ahb_clk
> +        *      video_cc_sleep_clk
> +        *      video_cc_xo_clk
> +        */
> +       regmap_update_bits(regmap, 0x80e4, BIT(0), BIT(0));
> +       regmap_update_bits(regmap, 0x8130, BIT(0), BIT(0));
> +       regmap_update_bits(regmap, 0x8114, BIT(0), BIT(0));
> +
> +       ret = qcom_cc_really_probe(pdev, &video_cc_sm8450_desc, regmap);
> +
> +       pm_runtime_put(&pdev->dev);
> +
> +       return ret;
> +}
> +
> +static struct platform_driver video_cc_sm8450_driver = {
> +       .probe = video_cc_sm8450_probe,
> +       .driver = {
> +               .name = "video_cc-sm8450",
> +               .of_match_table = video_cc_sm8450_match_table,
> +       },
> +};
> +
> +static int __init video_cc_sm8450_init(void)
> +{
> +       return platform_driver_register(&video_cc_sm8450_driver);
> +}
> +subsys_initcall(video_cc_sm8450_init);
> +
> +static void __exit video_cc_sm8450_exit(void)
> +{
> +       platform_driver_unregister(&video_cc_sm8450_driver);
> +}
> +module_exit(video_cc_sm8450_exit);

module_platform_driver() ?

> +
> +MODULE_DESCRIPTION("QTI VIDEO_CC SM8450 Driver");
> +MODULE_LICENSE("GPL");
> --
> 2.17.1
>


-- 
With best wishes
Dmitry