Re: [PATCH v4 1/4] dt-bindings: net: can: Add poll-interval for MCAN

[Marc Kleine-Budde]

On 05.05.2023 16:29:48, Rob Herring wrote:
> On Mon, May 01, 2023 at 05:46:21PM -0500, Judith Mendez wrote:
> > On AM62x SoC, MCANs on MCU domain do not have hardware interrupt
> > routed to A53 Linux, instead they will use software interrupt by
> > hrtimer. To enable timer method, interrupts should be optional so
> > remove interrupts property from required section and introduce
> > poll-interval property.
> > 
> > Signed-off-by: Judith Mendez <jm@xxxxxx>
> > ---
> > Changelog:
> > v3:
> >  1. Move binding patch to first in series
> >  2. Update description for poll-interval
> >  3. Add oneOf to specify using interrupts/interrupt-names or poll-interval
> >  4. Fix example property: add comment below 'example'
> > 
> > v2:
> >   1. Add poll-interval property to enable timer polling method
> >   2. Add example using poll-interval property
> >   
> >  .../bindings/net/can/bosch,m_can.yaml         | 36 +++++++++++++++++--
> >  1 file changed, 34 insertions(+), 2 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
> > index 67879aab623b..c024ee49962c 100644
> > --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
> > +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
> > @@ -14,6 +14,13 @@ maintainers:
> >  allOf:
> >    - $ref: can-controller.yaml#
> >  
> > +oneOf:
> > +  - required:
> > +      - interrupts
> > +      - interrupt-names
> > +  - required:
> > +      - poll-interval
> 
> Move this next to 'required'.
> 
> > +
> >  properties:
> >    compatible:
> >      const: bosch,m_can
> > @@ -40,6 +47,14 @@ properties:
> >        - const: int1
> >      minItems: 1
> >  
> > +  poll-interval:
> > +    $ref: /schemas/types.yaml#/definitions/flag
> 
> This is a common property already defined as a uint32. You shouldn't 
> define a new type.
> 
> A flag doesn't even make sense. If that's all you need, then just enable 
> polling if no interrupt is present.

Ok, then it's implicit. No IRQs -> polling.

Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |

Attachment: signature.asc
Description: PGP signature