Re: [PATCH v4 6/8] power: supply: rt5033_charger: Add cable detection and USB OTG supply

[Sebastian Reichel]

Hi,

On Sat, May 06, 2023 at 05:54:33PM +0200, Jakob Hauser wrote:
> Implement cable detection by extcon and handle the driver according to the
> connector type.
> 
> There are basically three types of action: "set_charging", "set_otg" and
> "set_disconnect".
> 
> A forth helper function to "unset_otg" was added because this is used in both
> "set_charging" and "set_disconnect". In the first case it covers the rather
> rare event that someone changes from OTG to charging without disconnect. In
> the second case, when disconnecting, the values are set back to the ones from
> initialization to return into a defined state.
> 
> Additionally, there is "set_mivr". When connecting to e.g. a laptop/PC, the
> minimum input voltage regulation (MIVR) shall prevent a voltage drop if the
> cable or the supply is weak. The MIVR value is set to 4600MV, same as in the
> Android driver [1]. When disconnecting, MIVR is set back to DISABLED.
> 
> In the function rt5033_get_charger_state(): When in OTG mode, the chip
> reports status "charging". Change this to "discharging" because there is
> no charging going on in OTG mode [2].
> 
> [1] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/battery/rt5033_charger.c#L499
> [2] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/battery/rt5033_charger.c#L686-L687
> 
> Tested-by: Raymond Hackley <raymondhackley@xxxxxxxxxxxxxx>
> Signed-off-by: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
> ---
> [...]
> diff --git a/include/linux/mfd/rt5033.h b/include/linux/mfd/rt5033.h
> index e99e2ab0c1c1..d2c613764756 100644
> --- a/include/linux/mfd/rt5033.h
> +++ b/include/linux/mfd/rt5033.h
> @@ -53,6 +53,14 @@ struct rt5033_charger {
>  	struct rt5033_dev		*rt5033;
>  	struct power_supply		*psy;
>  	struct rt5033_charger_data	*chg;
> +	struct extcon_dev		*edev;
> +	struct notifier_block		extcon_nb;
> +	struct work_struct		extcon_work;
> +	struct mutex			lock;
> +	bool online;
> +	bool otg;
> +	bool mivr_enabled;
> +	u8 cv_regval;
>  };

Please move 'struct rt5033_charger' and 'struct rt5033_charger_data'
to drivers/power/supply/rt5033_charger.c; they are not supposed to
be used directly by others. Making it private helps to avoid
cross-subsystem series for future maintanence patches.

Otherwise LGTM.

-- Sebastian

Attachment: signature.asc
Description: PGP signature