[PATCH v4 1/4] xhci: Fix resume issue of some ZHAOXIN hosts

[Weitao Wang]

On ZHAOXIN ZX-100 project, xHCI can't work normally after resume
from system Sx state. To fix this issue, when resume from system
Sx state, reinitialize xHCI instead of restore.
So, Add XHCI_RESET_ON_RESUME quirk for ZX-100 to fix issue of
resuming from system Sx state.

Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Weitao Wang <WeitaoWang-oc@xxxxxxxxxxx>
---
v3->v4
 - Add xHCI quirks for ZHAOXIN to every independent patch.
 - Modify some description of this patch series.

 drivers/usb/host/xhci-pci.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index ddb79f23fb3b..46d4d642c9bd 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -527,6 +527,11 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	     pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4))
 		xhci->quirks |= XHCI_NO_SOFT_RETRY;
 
+	if (pdev->vendor == PCI_VENDOR_ID_ZHAOXIN) {
+		if (pdev->device == 0x9202)
+			xhci->quirks |= XHCI_RESET_ON_RESUME;
+	}
+
 	/* xHC spec requires PCI devices to support D3hot and D3cold */
 	if (xhci->hci_version >= 0x120)
 		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
-- 
2.32.0