[PATCH 1/2] leds: flash: leds-qcom-flash: add PMI8998 support

[Dylan Van Assche]

Add subtype for the Qualcomm PMI8998 PMIC to support it besides the
PM8150 PMIC which has the same registers. Adjust the driver to recognize
both PMIC subtypes as a 3 channel LED driver.

Signed-off-by: Dylan Van Assche <me@xxxxxxxxxxxxxxxxx>
---
 drivers/leds/flash/leds-qcom-flash.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/leds/flash/leds-qcom-flash.c b/drivers/leds/flash/leds-qcom-flash.c
index 90a24fa25a49..16045b5d89b1 100644
--- a/drivers/leds/flash/leds-qcom-flash.c
+++ b/drivers/leds/flash/leds-qcom-flash.c
@@ -18,7 +18,8 @@
 #define FLASH_TYPE_VAL			0x18
 
 #define FLASH_SUBTYPE_REG		0x05
-#define FLASH_SUBTYPE_3CH_VAL		0x04
+#define FLASH_SUBTYPE_3CH_PM8150_VAL	0x04
+#define FLASH_SUBTYPE_3CH_PMI8998_VAL	0x03
 #define FLASH_SUBTYPE_4CH_VAL		0x07
 
 #define FLASH_STS_3CH_OTST1		BIT(0)
@@ -682,7 +683,7 @@ static int qcom_flash_led_probe(struct platform_device *pdev)
 		return rc;
 	}
 
-	if (val == FLASH_SUBTYPE_3CH_VAL) {
+	if (val == FLASH_SUBTYPE_3CH_PM8150_VAL || val == FLASH_SUBTYPE_3CH_PMI8998_VAL) {
 		flash_data->hw_type = QCOM_MVFLASH_3CH;
 		flash_data->max_channels = 3;
 		regs = mvflash_3ch_regs;
-- 
2.40.1