Re: [PATCH v2 1/2] dt-bindings: net: motorcomm: Add pad driver strength cfg

[Krzysztof Kozlowski]

On 05/05/2023 11:05, Samin Guo wrote:
> The motorcomm phy (YT8531) supports the ability to adjust the drive
> strength of the rx_clk/rx_data, the value range of pad driver
> strength is 0 to 7.
> 
> Signed-off-by: Samin Guo <samin.guo@xxxxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/net/motorcomm,yt8xxx.yaml    | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
> index 157e3bbcaf6f..29a1997a1577 100644
> --- a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
> +++ b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
> @@ -52,6 +52,18 @@ properties:
>        for a timer.
>      type: boolean
>  
> +  motorcomm,rx-clk-driver-strength:
> +    description: drive strength of rx_clk pad.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
> +    default: 3

No improvements after Andrew's comment.

Best regards,
Krzysztof