[PATCH v4 3/3] Documentation: trace: Add documentation for Coresight Dummy Trace

[Hao Zhang]

Add documentation for Coresight Dummy Trace under trace/coresight.

Signed-off-by: Hao Zhang <quic_hazha@xxxxxxxxxxx>
---
 .../trace/coresight/coresight-dummy.rst       | 34 +++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/trace/coresight/coresight-dummy.rst

diff --git a/Documentation/trace/coresight/coresight-dummy.rst b/Documentation/trace/coresight/coresight-dummy.rst
new file mode 100644
index 000000000000..7cb59f080c88
--- /dev/null
+++ b/Documentation/trace/coresight/coresight-dummy.rst
@@ -0,0 +1,34 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============================
+Coresight Dummy Trace Module
+=============================
+
+    :Author:   Hao Zhang <quic_hazha@xxxxxxxxxxx>
+    :Date:     May 2023
+
+Introduction
+---------------------------
+
+Coresight Dummy Trace Module is for the specific devices that kernel
+don't have permission to access or configure, e.g., CoreSight TPDMs
+on Qualcomm platforms. So there need driver to register dummy devices
+as Coresight devices. It may also be used to define components that
+may not have any programming interfaces (e.g, static links), so that
+paths can be established in the driver. Provide Coresight API for
+dummy device operations, such as enabling and disabling dummy devices.
+Build the Coresight path for dummy sink or dummy source for debugging.
+
+Config details
+---------------------------
+
+There are two types of nodes, dummy sink and dummy source. The nodes
+should be observed at the below coresight path::
+
+    ``/sys/bus/coresight/devices``.
+
+e.g.::
+
+    / $ ls -l /sys/bus/coresight/devices | grep dummy
+    dummy_sink0 -> ../../../devices/platform/soc@0/soc@0:sink/dummy_sink0
+    dummy_source0 -> ../../../devices/platform/soc@0/soc@0:source/dummy_source0
-- 
2.17.1