Re: [PATCH V3] arm64: dts: add support for C3 based Amlogic AW409
From: xianwei.zhao
Date: Fri May 05 2023 - 05:12:40 EST
On 2023/5/5 17:05, Neil Armstrong wrote:
[ EXTERNAL EMAIL ]
On 05/05/2023 09:12, Xianwei Zhao wrote:
Amlogic C3 is an advanced edge AI processor designed for smart IP camera
applications.
Add basic support for the C3 based Amlogic AW409 board, which describes
the following components: CPU, GIC, IRQ, Timer, UART. It's capable of
booting up into the serial console.
Signed-off-by: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
Link:
https://lore.kernel.org/all/20230407102704.1055152-1-kelvin.zhang@xxxxxxxxxxx
Link:
https://lore.kernel.org/all/20230307222651.2106615-2-martin.blumenstingl@xxxxxxxxxxxxxx
What are those links ? If they are dependencies, please add them under
the --- before the changelog.
Will do, thanks.
Thanks,
Neil
---
v2 -> V3: Remove '256m' from filename;
Keep alphabetical order of Makefile.
V1 -> V2: Remove new arch, and use ARCH_MESON;
Modify node name, and delete superfluous blank line.
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../dts/amlogic/amlogic-c3-c302x-aw409.dts | 29 +++++++
arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 86 +++++++++++++++++++
3 files changed, 116 insertions(+)
create mode 100644
arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
diff --git a/arch/arm64/boot/dts/amlogic/Makefile
b/arch/arm64/boot/dts/amlogic/Makefile
index cd1c5b04890a..6f61798a109f 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
new file mode 100644
index 000000000000..edce8850b338
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-c3.dtsi"
+
+/ {
+ model = "Amlogic C302 aw409 Development Board";
+ compatible = "amlogic,aw409", "amlogic,c3";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart_b;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x10000000>;
+ };
+};
+
+&uart_b {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
new file mode 100644
index 000000000000..93b335aef605
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ xtal: xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic: interrupt-controller@fff01000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0xfff01000 0 0x1000>,
+ <0x0 0xfff02000 0 0x2000>,
+ <0x0 0xfff04000 0 0x2000>,
+ <0x0 0xfff06000 0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4)
| IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ apb4: bus@fe000000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xfe000000 0x0 0x480000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+ uart_b: serial@7a000 {
+ compatible = "amlogic,meson-g12a-uart";
+ reg = <0x0 0x7a000 0x0 0x18>;
+ interrupts = <GIC_SPI 169
IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ clocks = <&xtal>, <&xtal>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ };
+
+ };
+ };
+};
base-commit: ae68fb187b59bc8645974320808ab2d7c41b1833