Re: [PATCH v6 0/2] Add EMAC3 support for sa8540p-ride (devicetree bits)

[Brian Masney]

On Mon, May 01, 2023 at 03:51:03PM -0500, Andrew Halaney wrote:
> This is a forward port / upstream refactor of code delivered
> downstream by Qualcomm over at [0] to enable the DWMAC5 based
> implementation called EMAC3 on the sa8540p-ride dev board.
> 
> >From what I can tell with the board schematic in hand,
> as well as the code delivered, the main changes needed are:
> 
>     1. A new address space layout for dwmac5/EMAC3 MTL/DMA regs
>     2. A new programming sequence required for the EMAC3 base platforms
> 
> This series addresses the devicetree changes to support this
> hardware bringup.
> 
> As requested[1], it has been split up by compile deps / maintainer tree.
> The associated v4 of the netdev specific changes can be found at [2],
> and is merged.
> 
> The clock patch from this series was picked up from v5, leaving just the
> devicetree bits here.
> 
> Together, they result in the ethernet controller working for
> both controllers on this platform.

Reviewed-by: Brian Masney <bmasney@xxxxxxxxxx>