[PATCH 0/6] arm64: qcom: sm84[34]50: enable DP altmode on USB-C Connector

[Neil Armstrong]

This is the final step to achieve USB-C Altmode on the HDK8350
and HDK8450 now DP controller support, USB3+DP Combo PHY and
pmic glink support have been merged for those platforms.

This patchset depends on the QMP Combo USB3+DP PHY orientation
support at [1].

The following has been successfully tested:
- USB-C PD Power Role, reported status are coherent
- USB-C dual-role data
  - USB2.0 only (no-PD) as DFP or UFP
  - USB2.0 + USB SuperSpeed as DFP or UFP & in both orientations
  - USB2.0 + USB SuperSpeed + DisplayPort Altmode in both orientations
  - DisplayPort-only Altmode in both orientations

Data role and SuperSpeed lanes were correctly switched on the PHY
side after USB-C removal/insertion.

[1] https://lore.kernel.org/all/20230425034010.3789376-1-quic_bjorande@xxxxxxxxxxx/

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
Neil Armstrong (6):
      arm64: dts: qcom: sm8350: add ports subnodes in usb1 qmpphy node
      arm64: dts: qcom: sm8450: add ports subnodes in usb1 qmpphy node
      arm64: dts: qcom: sm8350-hdk: Add QMP & DP to SuperSpeed graph
      arm64: dts: qcom: sm8450-hdk: Add QMP & DP to SuperSpeed graph
      arm64: defconfig: enable FSA4480 driver as module
      qcom: pmic_glink: enable altmode for SM8450

 arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 74 ++++++++++++++++++++++++++++++++-
 arch/arm64/boot/dts/qcom/sm8350.dtsi    | 26 ++++++++++++
 arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 71 ++++++++++++++++++++++++++++++-
 arch/arm64/boot/dts/qcom/sm8450.dtsi    | 26 ++++++++++++
 arch/arm64/configs/defconfig            |  1 +
 drivers/soc/qcom/pmic_glink.c           |  8 +++-
 6 files changed, 200 insertions(+), 6 deletions(-)
---
base-commit: b3afd23af1d1a8b690d512be825a7a8aef991eff
change-id: 20230503-topic-sm8450-graphics-dp-next-1dab962ae67d

Best regards,
-- 
Neil Armstrong <neil.armstrong@xxxxxxxxxx>