[PATCH 2/2] EDAC/altera: Check previous DDR DBE during driver probe

[niravkumar . l . rabara]

From: Niravkumar L Rabara <niravkumar.l.rabara@xxxxxxxxx>

Add DDR DBE check during driver probe to notify user if previous
reboot cause by DDR DBE and print DBE error related information.

Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@xxxxxxxxx>
---
 drivers/edac/altera_edac.c | 29 ++++++++++++++++++++++++-----
 1 file changed, 24 insertions(+), 5 deletions(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index 8b31cd54bdb6..398a49a3eb89 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -2159,6 +2159,7 @@ static int altr_edac_a10_probe(struct platform_device *pdev)
 #ifdef CONFIG_64BIT
 	{
 		int dberror, err_addr;
+		struct arm_smccc_res result;
 
 		edac->panic_notifier.notifier_call = s10_edac_dberr_handler;
 		atomic_notifier_chain_register(&panic_notifier_list,
@@ -2168,11 +2169,28 @@ static int altr_edac_a10_probe(struct platform_device *pdev)
 		regmap_read(edac->ecc_mgr_map, S10_SYSMGR_UE_VAL_OFST,
 			    &dberror);
 		if (dberror) {
-			regmap_read(edac->ecc_mgr_map, S10_SYSMGR_UE_ADDR_OFST,
-				    &err_addr);
-			edac_printk(KERN_ERR, EDAC_DEVICE,
-				    "Previous Boot UE detected[0x%X] @ 0x%X\n",
-				    dberror, err_addr);
+			/* Bit-31 is set if previous DDR UE happened */
+			if (dberror & (1 << 31)) {
+				/* Read previous DDR UE info */
+				arm_smccc_smc(INTEL_SIP_SMC_READ_SEU_ERR, 0,
+					0, 0, 0, 0, 0, 0, &result);
+
+				if (!(int)result.a0) {
+					edac_printk(KERN_ERR, EDAC_DEVICE,
+					"Previous DDR UE:Count=0x%X,Address=0x%X,ErrorData=0x%X\n"
+					, (unsigned int)result.a1, (unsigned int)result.a2
+					, (unsigned int)result.a3);
+				} else {
+					edac_printk(KERN_ERR, EDAC_DEVICE,
+						"INTEL_SIP_SMC_SEU_ERR_STATUS failed\n");
+				}
+			} else {
+				regmap_read(edac->ecc_mgr_map, S10_SYSMGR_UE_ADDR_OFST,
+						&err_addr);
+				edac_printk(KERN_ERR, EDAC_DEVICE,
+						"Previous Boot UE detected[0x%X] @ 0x%X\n",
+						dberror, err_addr);
+			}
 			/* Reset the sticky registers */
 			regmap_write(edac->ecc_mgr_map,
 				     S10_SYSMGR_UE_VAL_OFST, 0);
@@ -2180,6 +2198,7 @@ static int altr_edac_a10_probe(struct platform_device *pdev)
 				     S10_SYSMGR_UE_ADDR_OFST, 0);
 		}
 	}
+
 #else
 	edac->db_irq = platform_get_irq(pdev, 1);
 	if (edac->db_irq < 0)
-- 
2.25.1