Re: [PATCH v2 net-next 3/6] net: bcmasp: Add support for ASP2.0 Ethernet controller

From: Justin Chen
Date: Tue May 02 2023 - 17:27:10 EST


On Tue, May 2, 2023 at 12:44 PM Simon Horman <simon.horman@xxxxxxxxxxxx> wrote:
>
> On Wed, Apr 26, 2023 at 11:54:29AM -0700, Justin Chen wrote:
> > Add support for the Broadcom ASP 2.0 Ethernet controller which is first
> > introduced with 72165. This controller features two distinct Ethernet
> > ports that can be independently operated.
> >
> > This patch supports:
> >
> > - Wake-on-LAN using magic packets
> > - basic ethtool operations (link, counters, message level)
> > - MAC destination address filtering (promiscuous, ALL_MULTI, etc.)
> >
> > Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
> > Signed-off-by: Justin Chen <justinpopo6@xxxxxxxxx>
>
> ...
>
> > diff --git a/drivers/net/ethernet/broadcom/asp2/bcmasp.c b/drivers/net/ethernet/broadcom/asp2/bcmasp.c
>
> ...
>
> > +static int bcmasp_netfilt_get_reg_offset(struct bcmasp_priv *priv,
> > + struct bcmasp_net_filter *nfilt,
> > + enum asp_netfilt_reg_type reg_type,
> > + u32 offset)
> > +{
> > + u32 block_index, filter_sel;
> > +
> > + if (offset < 32) {
> > + block_index = ASP_RX_FILTER_NET_L2;
> > + filter_sel = nfilt->hw_index;
> > + } else if (offset < 64) {
> > + block_index = ASP_RX_FILTER_NET_L2;
> > + filter_sel = nfilt->hw_index + 1;
> > + } else if (offset < 96) {
> > + block_index = ASP_RX_FILTER_NET_L3_0;
> > + filter_sel = nfilt->hw_index;
> > + } else if (offset < 128) {
> > + block_index = ASP_RX_FILTER_NET_L3_0;
> > + filter_sel = nfilt->hw_index + 1;
> > + } else if (offset < 160) {
> > + block_index = ASP_RX_FILTER_NET_L3_1;
> > + filter_sel = nfilt->hw_index;
> > + } else if (offset < 192) {
> > + block_index = ASP_RX_FILTER_NET_L3_1;
> > + filter_sel = nfilt->hw_index + 1;
> > + } else if (offset < 224) {
> > + block_index = ASP_RX_FILTER_NET_L4;
> > + filter_sel = nfilt->hw_index;
> > + } else if (offset < 256) {
> > + block_index = ASP_RX_FILTER_NET_L4;
> > + filter_sel = nfilt->hw_index + 1;
> > + }
>
> block_index and filter_sel are uninitialised if offset doesn't match any
> of the conditions above. Can that happen?
>

Nope. This is a helper function for netfilter read and write reg, we
check offset sizes in those functions.

> > +
> > + switch (reg_type) {
> > + case ASP_NETFILT_MATCH:
> > + return ASP_RX_FILTER_NET_PAT(filter_sel, block_index,
> > + (offset % 32));
> > + case ASP_NETFILT_MASK:
> > + return ASP_RX_FILTER_NET_MASK(filter_sel, block_index,
> > + (offset % 32));
> > + default:
> > + return -EINVAL;
> > + }
> > +}
>
> ...
>
> > +static void bcmasp_netfilt_tcpip4_wr(struct bcmasp_priv *priv,
> > + struct bcmasp_net_filter *nfilt,
> > + struct ethtool_tcpip4_spec *match,
> > + struct ethtool_tcpip4_spec *mask,
> > + u32 offset)
> > +{
> > + __be16 val_16, mask_16;
> > +
> > + val_16 = htons(ETH_P_IP);
> > + mask_16 = 0xFFFF;
>
> mask_17 is __be16, but 0xFFFF is host byte order.
>
> Please make sure there are no new warnings when building with W=1 C=1.
>
> ...
>
> > +/* If no network filter found, return open filter.
> > + * If no more open filters return NULL
> > + */
> > +struct bcmasp_net_filter *bcmasp_netfilt_get_init(struct bcmasp_intf *intf,
> > + int loc, bool wake_filter,
> > + bool init)
> > +{
> > + struct bcmasp_priv *priv = intf->parent;
> > + struct bcmasp_net_filter *nfilter = NULL;
> > + int i, open_index = -1;
>
> Please use reverse xmas tree - longest line to shortest - for local
> variable declarations in networking code.
>
> You can check for this using https://github.com/ecree-solarflare/xmastree
>
> ...
>
> > +static int bcmasp_combine_set_filter(struct bcmasp_intf *intf,
> > + unsigned char *addr, unsigned char *mask,
> > + int i)
> > +{
> > + u64 addr1, addr2, mask1, mask2, mask3;
> > + struct bcmasp_priv *priv = intf->parent;
> > +
> > + /* Switch to u64 to help with the calculations */
> > + addr1 = ether_addr_to_u64(priv->mda_filters[i].addr);
> > + mask1 = ether_addr_to_u64(priv->mda_filters[i].mask);
> > + addr2 = ether_addr_to_u64(addr);
> > + mask2 = ether_addr_to_u64(mask);
> > +
> > + /* Check if one filter resides within the other */
> > + mask3 = mask1 & mask2;
> > + if (mask3 == mask1 && ((addr1 & mask1) == (addr2 & mask1))) {
> > + /* Filter 2 resides within fitler 1, so everthing is good */
>
> nit: s/fitler/filter/
>
> Please consider running ./scripts/checkpatch.pl --codespell
>
> ...
>
> > +static void bcmasp_update_mib_counters(struct bcmasp_intf *priv)
> > +{
> > + int i, j = 0;
> > +
> > + for (i = 0; i < BCMASP_STATS_LEN; i++) {
> > + const struct bcmasp_stats *s;
> > + u16 offset = 0;
> > + u32 val = 0;
> > + char *p;
> > +
> > + s = &bcmasp_gstrings_stats[i];
> > + switch (s->type) {
> > + case BCMASP_STAT_NETDEV:
> > + case BCMASP_STAT_SOFT:
> > + continue;
> > + case BCMASP_STAT_RUNT:
> > + offset += BCMASP_STAT_OFFSET;
> > + fallthrough;
> > + case BCMASP_STAT_MIB_TX:
> > + offset += BCMASP_STAT_OFFSET;
> > + fallthrough;
> > + case BCMASP_STAT_MIB_RX:
> > + val = umac_rl(priv, UMC_MIB_START + j + offset);
> > + offset = 0; /* Reset Offset */
> > + break;
> > + case BCMASP_STAT_RX_EDPKT:
> > + val = rx_edpkt_core_rl(priv->parent, s->reg_offset);
> > + break;
> > + case BCMASP_STAT_RX_CTRL:
> > + offset = bcmasp_stat_fixup_offset(priv, s);
> > + if (offset != ASP_RX_CTRL_FB_FILT_OUT_FRAME_COUNT)
> > + offset += sizeof(u32) * priv->port;
> > + val = rx_ctrl_core_rl(priv->parent, offset);
> > + break;
> > + }
> > +
> > + j += s->stat_sizeof;
> > + p = (char *)priv + s->stat_offset;
> > + *(u32 *)p = val;
>
> Is p always 32bit aligned?
>

Nope. I can make sure it is 32 bit aligned.

Acked, the other comments. Will submit v3 when net-next window is
open. Thank you for the review.

Justin

> > + }
> > +}
> > +
> > +static void bcmasp_get_ethtool_stats(struct net_device *dev,
> > + struct ethtool_stats *stats,
> > + u64 *data)
> > +{
> > + struct bcmasp_intf *priv = netdev_priv(dev);
> > + int i, j = 0;
> > +
> > + if (netif_running(dev))
> > + bcmasp_update_mib_counters(priv);
> > +
> > + dev->netdev_ops->ndo_get_stats(dev);
> > +
> > + for (i = 0; i < BCMASP_STATS_LEN; i++) {
> > + const struct bcmasp_stats *s;
> > + char *p;
> > +
> > + s = &bcmasp_gstrings_stats[i];
> > + if (!bcmasp_stat_available(priv, s->type))
> > + continue;
> > + if (s->type == BCMASP_STAT_NETDEV)
> > + p = (char *)&dev->stats;
> > + else
> > + p = (char *)priv;
> > + p += s->stat_offset;
> > + if (sizeof(unsigned long) != sizeof(u32) &&
> > + s->stat_sizeof == sizeof(unsigned long))
> > + data[j] = *(unsigned long *)p;
> > + else
> > + data[j] = *(u32 *)p;
>
> Maybe memcpy would make this a little easier to read.
>
> > + j++;
> > + }
> > +}
>
> ...
>
> > diff --git a/drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c b/drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c
>
> ...
>
> > +static int bcmasp_init_rx(struct bcmasp_intf *intf)
> > +{
> > + struct device *kdev = &intf->parent->pdev->dev;
> > + struct net_device *ndev = intf->ndev;
> > + void *p;
> > + dma_addr_t dma;
> > + struct page *buffer_pg;
> > + u32 reg;
> > + int ret;
> > +
> > + intf->rx_buf_order = get_order(RING_BUFFER_SIZE);
> > + buffer_pg = alloc_pages(GFP_KERNEL, intf->rx_buf_order);
> > +
> > + dma = dma_map_page(kdev, buffer_pg, 0, RING_BUFFER_SIZE,
> > + DMA_FROM_DEVICE);
> > + if (dma_mapping_error(kdev, dma)) {
> > + netdev_err(ndev, "Cannot allocate RX buffer\n");
>
> I think the core will log an error on allocation failure,
> so the message above is not needed.
>
> > + __free_pages(buffer_pg, intf->rx_buf_order);
> > + return -ENOMEM;
> > + }
>
> ...