Re: [PATCH 12/43] clk: ep93xx: add DT support for Cirrus EP93xx

From: Stephen Boyd
Date: Fri Apr 28 2023 - 20:58:57 EST


Quoting Nikita Shubin (2023-04-24 05:34:28)
> This is a rewrite of EP93xx timer driver in
> arch/arm/mach-ep93xx/clock.c trying to do everything
> the device tree way:
>
> - convert to syscon driver
> - provide clock acces via of

But clkdev is still around?

>
> Co-developed-by: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
> Signed-off-by: Nikita Shubin <nikita.shubin@xxxxxxxxxxx>
> ---
>
> Notes:
> rfc->v0
> Linus Walleij:
> - renamed all __underscore
>
> Alexander Sverdlin:
> - "Logick" -> "Logic"
>
> Changes by Alexander Sverdlin:
> - remove pr_info
> - DIV_ROUND_UP_ULL -> DIV_ROUND_CLOSEST
> - fix zeroing bitfield in ep93xx_div_set_rate
> - add sanity check for EP93XX_SYSCON_CHIPID_ID
> - use bit index for DMA clock's
> - ep93xx_clk_register_gate() takes bit index, not mask
> - remove redundant define
> - use DIV_ROUND_CLOSEST() everywhere to achieve frequencies closer to those
> requested
> - Add the forgotten configuration from the deleted
> arch/arm/mach-ep93xx/core.c
>
> drivers/clk/Kconfig | 8 +
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-ep93xx.c | 880 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 889 insertions(+)
> create mode 100644 drivers/clk/clk-ep93xx.c
>
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 1eef05bb1f99..d3ad975b688e 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -436,6 +436,14 @@ config COMMON_CLK_K210
> help
> Support for the Canaan Kendryte K210 RISC-V SoC clocks.
>
> +config COMMON_CLK_EP93XX

Keep this sorted based on Kconfig symbol.

> + bool "Clock driver for Cirrus Logic ep93xx SoC"
> + depends on ARCH_EP93XX || COMPILE_TEST
> + select MFD_SYSCON
> + select REGMAP
> + help
> + This driver supports the SoC clocks on the Cirrus Logic ep93xx.
> +
> source "drivers/clk/actions/Kconfig"
> source "drivers/clk/analogbits/Kconfig"
> source "drivers/clk/baikal-t1/Kconfig"
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index e3ca0d058a25..deec25ffd004 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -29,6 +29,7 @@ obj-$(CONFIG_COMMON_CLK_CDCE706) += clk-cdce706.o
> obj-$(CONFIG_COMMON_CLK_CDCE925) += clk-cdce925.o
> obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o
> obj-$(CONFIG_COMMON_CLK_CS2000_CP) += clk-cs2000-cp.o
> +obj-$(CONFIG_COMMON_CLK_EP93XX) += clk-ep93xx.o
> obj-$(CONFIG_ARCH_SPARX5) += clk-sparx5.o
> obj-$(CONFIG_COMMON_CLK_EN7523) += clk-en7523.o
> obj-$(CONFIG_COMMON_CLK_FIXED_MMIO) += clk-fixed-mmio.o
> diff --git a/drivers/clk/clk-ep93xx.c b/drivers/clk/clk-ep93xx.c
> new file mode 100644
> index 000000000000..e5913fc4c39b
> --- /dev/null
> +++ b/drivers/clk/clk-ep93xx.c
> @@ -0,0 +1,880 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Clock control for Cirrus EP93xx chips.
> + * Copyright (C) 2021 Nikita Shubin <nikita.shubin@xxxxxxxxxxx>
> + *
> + * Based on a rewrite of arch/arm/mach-ep93xx/clock.c:
> + * Copyright (C) 2006 Lennert Buytenhek <buytenh@xxxxxxxxxxxxxx>
> + */
> +#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
> +
> +#include <linux/kernel.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/string.h>
> +#include <linux/io.h>
> +#include <linux/spinlock.h>
> +#include <linux/clkdev.h>
> +#include <linux/clk-provider.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/soc/cirrus/ep93xx.h>
> +#include <dt-bindings/clock/cirrus,ep93xx-clock.h>
> +
> +#include <asm/div64.h>
> +
> +#define EP93XX_EXT_CLK_RATE 14745600
> +#define EP93XX_EXT_RTC_RATE 32768
> +
> +#define EP93XX_SYSCON_POWER_STATE 0x00
> +#define EP93XX_SYSCON_PWRCNT 0x04
> +#define EP93XX_SYSCON_PWRCNT_UARTBAUD BIT(29)
> +#define EP93XX_SYSCON_PWRCNT_USH_EN 28
> +#define EP93XX_SYSCON_PWRCNT_DMA_M2M1 27
> +#define EP93XX_SYSCON_PWRCNT_DMA_M2M0 26
> +#define EP93XX_SYSCON_PWRCNT_DMA_M2P8 25
> +#define EP93XX_SYSCON_PWRCNT_DMA_M2P9 24
> +#define EP93XX_SYSCON_PWRCNT_DMA_M2P6 23
> +#define EP93XX_SYSCON_PWRCNT_DMA_M2P7 22
> +#define EP93XX_SYSCON_PWRCNT_DMA_M2P4 21
> +#define EP93XX_SYSCON_PWRCNT_DMA_M2P5 20
> +#define EP93XX_SYSCON_PWRCNT_DMA_M2P2 19
> +#define EP93XX_SYSCON_PWRCNT_DMA_M2P3 18
> +#define EP93XX_SYSCON_PWRCNT_DMA_M2P0 17
> +#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 16
> +#define EP93XX_SYSCON_CLKSET1 0x20
> +#define EP93XX_SYSCON_CLKSET1_NBYP1 BIT(23)
> +#define EP93XX_SYSCON_CLKSET2 0x24
> +#define EP93XX_SYSCON_CLKSET2_NBYP2 BIT(19)
> +#define EP93XX_SYSCON_CLKSET2_PLL2_EN BIT(18)
> +#define EP93XX_SYSCON_DEVCFG 0x80
> +#define EP93XX_SYSCON_DEVCFG_U3EN 24
> +#define EP93XX_SYSCON_DEVCFG_U2EN 20
> +#define EP93XX_SYSCON_DEVCFG_U1EN 18
> +#define EP93XX_SYSCON_VIDCLKDIV 0x84
> +#define EP93XX_SYSCON_CLKDIV_ENABLE 15
> +#define EP93XX_SYSCON_CLKDIV_ESEL BIT(14)
> +#define EP93XX_SYSCON_CLKDIV_PSEL BIT(13)
> +#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT 8
> +#define EP93XX_SYSCON_I2SCLKDIV 0x8c
> +#define EP93XX_SYSCON_I2SCLKDIV_SENA 31
> +#define EP93XX_SYSCON_I2SCLKDIV_ORIDE BIT(29)
> +#define EP93XX_SYSCON_I2SCLKDIV_SPOL BIT(19)
> +#define EP93XX_I2SCLKDIV_SDIV (1 << 16)
> +#define EP93XX_I2SCLKDIV_LRDIV32 (0 << 17)
> +#define EP93XX_I2SCLKDIV_LRDIV64 (1 << 17)
> +#define EP93XX_I2SCLKDIV_LRDIV128 (2 << 17)
> +#define EP93XX_I2SCLKDIV_LRDIV_MASK (3 << 17)
> +#define EP93XX_SYSCON_KEYTCHCLKDIV 0x90
> +#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN 31
> +#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV 16
> +#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN 15
> +#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV 0
> +#define EP93XX_SYSCON_CHIPID 0x94
> +#define EP93XX_SYSCON_CHIPID_ID 0x9213
> +
> +static DEFINE_SPINLOCK(clk_lock);

This name is not unique. Please make it unique by prefixing with ep93xx.

> +static struct regmap *ep93xx_map;

Do these need to be static globals? Doing a runtime allocation reduces
the size overhead for kernel images that don't have this hardware but
compile in this driver, i.e. distros.

> +#define ep93xx_regmap_read(reg, val) regmap_read(ep93xx_map, reg, val)
> +
> +/* Keeps track of all clocks */
> +static struct clk_hw_onecell_data *ep93xx_clk_data;

Same static global question.

> +
> +static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
> +static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
> +static char pclk_divisors[] = { 1, 2, 4, 8 };
> +
> +static char adc_divisors[] = { 16, 4 };
> +static char sclk_divisors[] = { 2, 4 };
> +static char lrclk_divisors[] = { 32, 64, 128 };

const?

> +
> +static const char * const mux_parents[] = {
> + "xtali",
> + "pll1",
> + "pll2"
> +};
> +
> +/*
> + * PLL rate = 14.7456 MHz * (X1FBD + 1) * (X2FBD + 1) / (X2IPD + 1) / 2^PS
> + */
> +static unsigned long calc_pll_rate(unsigned long long rate, u32 config_word)

u64 rate

> +{
> + int i;
> +
> + rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */
> + rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */
> + do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */
> + for (i = 0; i < ((config_word >> 16) & 3); i++) /* PS */
> + rate >>= 1;
> +
> + return (unsigned long)rate;

Drop useless cast.

> +}
> +
> +struct clk_psc {
> + struct clk_hw hw;
> + unsigned int reg;
> + u8 bit_idx;
> + u32 mask;
> + u8 shift;
> + u8 width;
> + char *div;
> + u8 num_div;
> + spinlock_t *lock;
> +};
> +
> +#define to_clk_psc(_hw) container_of(_hw, struct clk_psc, hw)
> +
> +static int ep93xx_clk_is_enabled(struct clk_hw *hw)
> +{
> + struct clk_psc *psc = to_clk_psc(hw);
> + u32 val;
> +
> + ep93xx_regmap_read(psc->reg, &val);
> +
> + return (val & BIT(psc->bit_idx)) ? 1 : 0;
> +}
> +
> +static int ep93xx_clk_enable(struct clk_hw *hw)
> +{
> + struct clk_psc *psc = to_clk_psc(hw);
> + unsigned long flags = 0;
> + u32 val;
> +
> + if (psc->lock)
> + spin_lock_irqsave(psc->lock, flags);
> +
> + ep93xx_regmap_read(psc->reg, &val);
> + val |= BIT(psc->bit_idx);
> +
> + ep93xx_syscon_swlocked_write(val, psc->reg);
> +
> + if (psc->lock)
> + spin_unlock_irqrestore(psc->lock, flags);
> +
> + return 0;
> +}
> +
> +static void ep93xx_clk_disable(struct clk_hw *hw)
> +{
> + struct clk_psc *psc = to_clk_psc(hw);
> + unsigned long flags = 0;
> + u32 val;
> +
> + if (psc->lock)
> + spin_lock_irqsave(psc->lock, flags);
> +
> + ep93xx_regmap_read(psc->reg, &val);
> + val &= ~BIT(psc->bit_idx);
> +
> + ep93xx_syscon_swlocked_write(val, psc->reg);
> +
> + if (psc->lock)
> + spin_unlock_irqrestore(psc->lock, flags);
> +}
> +
> +static const struct clk_ops clk_ep93xx_gate_ops = {
> + .enable = ep93xx_clk_enable,
> + .disable = ep93xx_clk_disable,
> + .is_enabled = ep93xx_clk_is_enabled,
> +};
> +
> +static struct clk_hw *ep93xx_clk_register_gate(const char *name,
> + const char *parent_name,
> + unsigned int reg,
> + u8 bit_idx)
> +{
> + struct clk_init_data init;
> + struct clk_psc *psc;
> + struct clk *clk;
> +
> + psc = kzalloc(sizeof(*psc), GFP_KERNEL);
> + if (!psc)
> + return ERR_PTR(-ENOMEM);
> +
> + init.name = name;
> + init.ops = &clk_ep93xx_gate_ops;
> + init.flags = CLK_SET_RATE_PARENT;
> + init.parent_names = (parent_name ? &parent_name : NULL);
> + init.num_parents = (parent_name ? 1 : 0);

Please use parent_data or parent_hw instead.

> +
> + psc->reg = reg;
> + psc->bit_idx = bit_idx;
> + psc->hw.init = &init;
> + psc->lock = &clk_lock;
> +
> + clk = clk_register(NULL, &psc->hw);
> + if (IS_ERR(clk)) {
> + kfree(psc);
> + return ERR_CAST(clk);
> + }
> +
> + return &psc->hw;
> +}
> +
> +static u8 ep93xx_mux_get_parent(struct clk_hw *hw)
> +{
> + struct clk_psc *psc = to_clk_psc(hw);
> + u32 val;
> +
> + ep93xx_regmap_read(psc->reg, &val);
> + if (!(val & EP93XX_SYSCON_CLKDIV_ESEL))
> + return 0;
> +
> + if (!(val & EP93XX_SYSCON_CLKDIV_PSEL))
> + return 1;
> +
> + return 2;
> +}
> +
> +static int ep93xx_mux_set_parent_lock(struct clk_hw *hw, u8 index)
> +{
> + struct clk_psc *psc = to_clk_psc(hw);
> + unsigned long flags = 0;
> + u32 val;
> +
> + if (index >= ARRAY_SIZE(mux_parents))
> + return -EINVAL;
> +
> + if (psc->lock)

Can you simply lock all the time?

> + spin_lock_irqsave(psc->lock, flags);
> +
> + ep93xx_regmap_read(psc->reg, &val);
> + val &= ~(EP93XX_SYSCON_CLKDIV_ESEL | EP93XX_SYSCON_CLKDIV_PSEL);
> +
> + if (index != 0) {
> + val |= EP93XX_SYSCON_CLKDIV_ESEL;
> + val |= (index - 1) ? EP93XX_SYSCON_CLKDIV_PSEL : 0;
> + }
> +
> + ep93xx_syscon_swlocked_write(val, psc->reg);
> +
> + if (psc->lock)
> + spin_unlock_irqrestore(psc->lock, flags);
> +
> + return 0;
> +}
> +
> +static bool is_best(unsigned long rate, unsigned long now,
> + unsigned long best)
> +{
> + return abs(rate - now) < abs(rate - best);
> +}
> +
> +static int ep93xx_mux_determine_rate(struct clk_hw *hw,
> + struct clk_rate_request *req)
> +{
> + unsigned long rate = req->rate;
> + struct clk *parent_best = NULL;
> + unsigned long parent_rate;
> + unsigned long best_rate = 0, actual_rate, mclk_rate;
> + unsigned long parent_rate_best;
> + int div, pdiv;
> + int i;
> +
> + /*
> + * Try the two pll's and the external clock
> + * Because the valid predividers are 2, 2.5 and 3, we multiply
> + * all the clocks by 2 to avoid floating point math.
> + *
> + * This is based on the algorithm in the ep93xx raster guide:
> + * http://be-a-maverick.com/en/pubs/appNote/AN269REV1.pdf
> + *
> + */
> + for (i = 0; i < ARRAY_SIZE(mux_parents); i++) {
> + struct clk *parent = clk_get_sys(mux_parents[i], NULL);

The possible parents can be had with clk_hw_get_parent_by_index(). Use
that so you can stop leaking .

> +
> + parent_rate = clk_get_rate(parent);
> + mclk_rate = parent_rate * 2;

The parent_rate is available via clk_hw_get_rate() or by looking at the
clk_rate_request structure 'req' if the parent is the current parent, or
by calling clk_hw_round_rate() or the poorly named
__clk_determine_rate(). In this case it looks like the parents aren't
expected to change rate, so clk_hw_get_rate() will work.

> +
> + /* Try each predivider value */
> + for (pdiv = 4; pdiv <= 6; pdiv++) {
> + div = DIV_ROUND_CLOSEST(mclk_rate, rate * pdiv);
> + if (div < 1 || div > 127)
> + continue;
> +
> + actual_rate = DIV_ROUND_CLOSEST(mclk_rate, pdiv * div);
> +
> + if (is_best(rate, actual_rate, best_rate)) {
> + best_rate = actual_rate;
> + parent_rate_best = parent_rate;
> + parent_best = parent;
> + }
> + }
> + }
> +
> + if (!parent_best)
> + return -EINVAL;
> +
> + req->best_parent_rate = parent_rate_best;
> + req->best_parent_hw = __clk_get_hw(parent_best);
> + req->rate = best_rate;
> +
> + return 0;
> +}
> +
> +static unsigned long ep93xx_ddiv_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct clk_psc *psc = to_clk_psc(hw);
> + unsigned long rate = 0;
> + u32 val;
> + int pdiv, div;
> +
> + ep93xx_regmap_read(psc->reg, &val);
> + pdiv = ((val >> EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) & 0x03);
> + div = val & 0x7f;
> + if (div > 0)
> + rate = DIV_ROUND_CLOSEST(parent_rate * 2, (pdiv + 3) * div);
> +
> + return rate;
> +}
> +
> +static int ep93xx_ddiv_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct clk_psc *psc = to_clk_psc(hw);
> + int pdiv, div, npdiv, ndiv;
> + unsigned long actual_rate, mclk_rate, rate_err = -1;
> + int found = 0;
> + u32 val;
> +
> + ep93xx_regmap_read(psc->reg, &val);
> + mclk_rate = parent_rate * 2;
> +
> + for (pdiv = 4; pdiv <= 6; pdiv++) {
> + div = DIV_ROUND_CLOSEST(mclk_rate, rate * pdiv);
> + if (div < 1 || div > 127)
> + continue;
> +
> + actual_rate = DIV_ROUND_CLOSEST(mclk_rate, pdiv * div);
> +
> + if (!found || abs(actual_rate - rate) < rate_err) {
> + npdiv = pdiv - 3;
> + ndiv = div;
> + rate_err = abs(actual_rate - rate);
> + found = 1;
> + }
> + }
> +
> + if (!found)
> + return -EINVAL;
> +
> + /* Clear old dividers */
> + val &= ~0x37f;
> +
> + /* Set the new pdiv and div bits for the new clock rate */
> + val |= (npdiv << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | ndiv;
> +
> + ep93xx_syscon_swlocked_write(val, psc->reg);
> +
> + return 0;
> +}
> +
> +static const struct clk_ops clk_ddiv_ops = {
> + .enable = ep93xx_clk_enable,
> + .disable = ep93xx_clk_disable,
> + .is_enabled = ep93xx_clk_is_enabled,
> + .get_parent = ep93xx_mux_get_parent,
> + .set_parent = ep93xx_mux_set_parent_lock,
> + .determine_rate = ep93xx_mux_determine_rate,
> + .recalc_rate = ep93xx_ddiv_recalc_rate,
> + .set_rate = ep93xx_ddiv_set_rate,
> +};
> +
> +static struct clk_hw *clk_hw_register_ddiv(const char *name,
> + unsigned int reg,
> + u8 bit_idx)
> +{
> + struct clk_init_data init;
> + struct clk_psc *psc;
> + struct clk *clk;
> +
> + psc = kzalloc(sizeof(*psc), GFP_KERNEL);
> + if (!psc)
> + return ERR_PTR(-ENOMEM);
> +
> + init.name = name;
> + init.ops = &clk_ddiv_ops;
> + init.flags = 0;
> + init.parent_names = mux_parents;
> + init.num_parents = ARRAY_SIZE(mux_parents);
> +
> + psc->reg = reg;
> + psc->bit_idx = bit_idx;
> + psc->lock = &clk_lock;
> + psc->hw.init = &init;
> +
> + clk = clk_register(NULL, &psc->hw);
> + if (IS_ERR(clk)) {
> + kfree(psc);
> + return ERR_CAST(clk);
> + }
> +
> + return &psc->hw;
> +}
> +
> +static unsigned long ep93xx_div_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct clk_psc *psc = to_clk_psc(hw);
> + u32 val;
> + u8 index;
> +
> + ep93xx_regmap_read(psc->reg, &val);
> + index = (val & psc->mask) >> psc->shift;
> + if (index > psc->num_div)
> + return 0;
> +
> + return DIV_ROUND_CLOSEST(parent_rate, psc->div[index]);
> +}
> +
> +static long ep93xx_div_round_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long *parent_rate)
> +{
> + struct clk_psc *psc = to_clk_psc(hw);
> + unsigned long best = 0, now;
> + bool assigned = false;
> + int i;
> +
> + for (i = 0; i < psc->num_div; i++) {
> + if ((rate * psc->div[i]) == *parent_rate)
> + return rate;
> +
> + now = DIV_ROUND_CLOSEST(*parent_rate, psc->div[i]);
> +
> + if (!assigned || is_best(rate, now, best))
> + best = now;
> + assigned = true;
> + }
> +
> + return best;
> +}
> +
> +static int ep93xx_div_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct clk_psc *psc = to_clk_psc(hw);
> + u32 val;
> + int i;
> +
> + ep93xx_regmap_read(psc->reg, &val);
> + val &= ~psc->mask;
> + for (i = 0; i < psc->num_div; i++)
> + if (rate == DIV_ROUND_CLOSEST(parent_rate, psc->div[i])) {
> + val |= i << psc->shift;
> + break;
> + }
> +
> + if (i == psc->num_div)
> + return -EINVAL;
> +
> + ep93xx_syscon_swlocked_write(val, psc->reg);
> +
> + return 0;
> +}
> +
> +static const struct clk_ops ep93xx_div_ops = {
> + .enable = ep93xx_clk_enable,
> + .disable = ep93xx_clk_disable,
> + .is_enabled = ep93xx_clk_is_enabled,
> + .recalc_rate = ep93xx_div_recalc_rate,
> + .round_rate = ep93xx_div_round_rate,
> + .set_rate = ep93xx_div_set_rate,
> +};
> +
> +static struct clk_hw *clk_hw_register_div(const char *name,
> + const char *parent_name,
> + unsigned int reg,
> + u8 enable_bit,
> + u8 shift,
> + u8 width,
> + char *clk_divisors,
> + u8 num_div)
> +{
> + struct clk_init_data init;
> + struct clk_psc *psc;
> + struct clk *clk;
> +
> + psc = kzalloc(sizeof(*psc), GFP_KERNEL);
> + if (!psc)
> + return ERR_PTR(-ENOMEM);
> +
> + init.name = name;
> + init.ops = &ep93xx_div_ops;
> + init.flags = 0;
> + init.parent_names = (parent_name ? &parent_name : NULL);
> + init.num_parents = 1;
> +
> + psc->reg = reg;
> + psc->bit_idx = enable_bit;
> + psc->mask = GENMASK(shift + width - 1, shift);
> + psc->shift = shift;
> + psc->div = clk_divisors;
> + psc->num_div = num_div;
> + psc->lock = &clk_lock;
> + psc->hw.init = &init;
> +
> + clk = clk_register(NULL, &psc->hw);

Use clk_hw_register()

> + if (IS_ERR(clk)) {
> + kfree(psc);
> + return ERR_CAST(clk);
> + }
> +
> + return &psc->hw;
> +}
> +
> +struct ep93xx_gate {
> + unsigned int idx;
> + unsigned int bit;
> + const char *dev_id;
> + const char *con_id;
> +};
> +
> +static struct ep93xx_gate ep93xx_uarts[] = {
> + {EP93XX_CLK_UART1, EP93XX_SYSCON_DEVCFG_U1EN, "apb:uart1", NULL},
> + {EP93XX_CLK_UART2, EP93XX_SYSCON_DEVCFG_U2EN, "apb:uart2", NULL},
> + {EP93XX_CLK_UART3, EP93XX_SYSCON_DEVCFG_U3EN, "apb:uart3", NULL},
> +};
> +
> +static void ep93xx_uart_clock_init(void)
> +{
> + unsigned int i;
> + struct clk_hw *hw;
> + u32 val;
> + unsigned int clk_uart_div;
> +
> + ep93xx_regmap_read(EP93XX_SYSCON_PWRCNT, &val);
> + if (val & EP93XX_SYSCON_PWRCNT_UARTBAUD)
> + clk_uart_div = 1;
> + else
> + clk_uart_div = 2;
> +
> + hw = clk_hw_register_fixed_factor(NULL, "uart", "xtali", 0, 1, clk_uart_div);
> + ep93xx_clk_data->hws[EP93XX_CLK_UART] = hw;
> +
> + /* parenting uart gate clocks to uart clock */
> + for (i = 0; i < ARRAY_SIZE(ep93xx_uarts); i++) {
> + hw = ep93xx_clk_register_gate(ep93xx_uarts[i].dev_id,
> + "uart",
> + EP93XX_SYSCON_DEVCFG,
> + ep93xx_uarts[i].bit);
> +
> + ep93xx_clk_data->hws[ep93xx_uarts[i].idx] = hw;
> + }
> +}
> +
> +static struct ep93xx_gate ep93xx_dmas[] = {

const?

> + {EP93XX_CLK_M2P0, EP93XX_SYSCON_PWRCNT_DMA_M2P0, NULL, "m2p0"},

Put space after { and before }

> + {EP93XX_CLK_M2P1, EP93XX_SYSCON_PWRCNT_DMA_M2P1, NULL, "m2p1"},
> + {EP93XX_CLK_M2P2, EP93XX_SYSCON_PWRCNT_DMA_M2P2, NULL, "m2p2"},
> + {EP93XX_CLK_M2P3, EP93XX_SYSCON_PWRCNT_DMA_M2P3, NULL, "m2p3"},
> + {EP93XX_CLK_M2P4, EP93XX_SYSCON_PWRCNT_DMA_M2P4, NULL, "m2p4"},
> + {EP93XX_CLK_M2P5, EP93XX_SYSCON_PWRCNT_DMA_M2P5, NULL, "m2p5"},
> + {EP93XX_CLK_M2P6, EP93XX_SYSCON_PWRCNT_DMA_M2P6, NULL, "m2p6"},
> + {EP93XX_CLK_M2P7, EP93XX_SYSCON_PWRCNT_DMA_M2P7, NULL, "m2p7"},
> + {EP93XX_CLK_M2P8, EP93XX_SYSCON_PWRCNT_DMA_M2P8, NULL, "m2p8"},
> + {EP93XX_CLK_M2P9, EP93XX_SYSCON_PWRCNT_DMA_M2P9, NULL, "m2p9"},
> + {EP93XX_CLK_M2M0, EP93XX_SYSCON_PWRCNT_DMA_M2M0, NULL, "m2m0"},
> + {EP93XX_CLK_M2M1, EP93XX_SYSCON_PWRCNT_DMA_M2M1, NULL, "m2m1"},
> +};
> +
> +static void ep93xx_dma_clock_init(void __iomem *base)
> +{
> + int i;
> + struct clk_hw *hw;
> + int ret;
> +
> + for (i = 0; i < ARRAY_SIZE(ep93xx_dmas); i++) {
> + hw = clk_hw_register_gate(NULL, ep93xx_dmas[i].con_id,
> + "hclk", 0,
> + base + EP93XX_SYSCON_PWRCNT,
> + ep93xx_dmas[i].bit,
> + 0,
> + &clk_lock);
> +
> + ret = clk_hw_register_clkdev(hw, ep93xx_dmas[i].con_id, NULL);
> + if (ret) {
> + pr_err("%s: failed to register lookup %s\n",
> + __func__, ep93xx_dmas[i].con_id);
> + continue;
> + }
> +
> + ep93xx_clk_data->hws[ep93xx_dmas[i].idx] = hw;
> + }
> +}
> +
> +static int ep93xx_clk_probe(struct platform_device *pdev)
> +{
> + void __iomem *base;
> + unsigned int clk_usb_div;
> + unsigned long clk_spi_div;
> + struct clk_hw *hw;
> + struct device *dev = &pdev->dev;
> + u32 value;
> + struct resource *res;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + ep93xx_regmap_read(EP93XX_SYSCON_CLKSET2, &value);
> + clk_usb_div = (((value >> 28) & 0xf) + 1);
> + hw = clk_hw_register_fixed_factor(NULL, "usb_clk", "pll2", 0, 1, clk_usb_div);
> + hw = clk_hw_register_gate(NULL, "ohci-platform",
> + "usb_clk", 0,
> + base + EP93XX_SYSCON_PWRCNT,
> + EP93XX_SYSCON_PWRCNT_USH_EN,
> + 0,
> + &clk_lock);
> + clk_hw_register_clkdev(hw, NULL, "ohci-platform");
> + ep93xx_clk_data->hws[EP93XX_CLK_USB] = hw;
> +
> + /*
> + * EP93xx SSP clock rate was doubled in version E2. For more information
> + * see:
> + * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
> + */
> + clk_spi_div = 1;
> + if (ep93xx_chip_revision() < EP93XX_CHIP_REV_E2)
> + clk_spi_div = 2;
> + hw = clk_hw_register_fixed_factor(NULL, "ep93xx-spi.0", "xtali", 0, 1, clk_spi_div);
> + clk_hw_register_clkdev(hw, NULL, "ep93xx-spi.0");
> + ep93xx_clk_data->hws[EP93XX_CLK_SPI] = hw;
> +
> + /* pwm clock */
> + hw = clk_hw_register_fixed_factor(NULL, "pwm_clk", "xtali", 0, 1, 1);
> + clk_hw_register_clkdev(hw, "pwm_clk", NULL);
> + ep93xx_clk_data->hws[EP93XX_CLK_PWM] = hw;
> +
> + ep93xx_uart_clock_init();
> +
> + /* touchscreen/adc clock */
> + hw = clk_hw_register_div("ep93xx-adc",
> + "xtali",
> + EP93XX_SYSCON_KEYTCHCLKDIV,
> + EP93XX_SYSCON_KEYTCHCLKDIV_TSEN,
> + EP93XX_SYSCON_KEYTCHCLKDIV_ADIV,
> + 1,
> + adc_divisors,
> + ARRAY_SIZE(adc_divisors));
> +
> + clk_hw_register_clkdev(hw, NULL, "ep93xx-adc");
> + ep93xx_clk_data->hws[EP93XX_CLK_ADC] = hw;
> +
> + /* keypad clock */
> + hw = clk_hw_register_div("ep93xx-keypad",
> + "xtali",
> + EP93XX_SYSCON_KEYTCHCLKDIV,
> + EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
> + EP93XX_SYSCON_KEYTCHCLKDIV_KDIV,
> + 1,
> + adc_divisors,
> + ARRAY_SIZE(adc_divisors));
> +
> + clk_hw_register_clkdev(hw, NULL, "ep93xx-keypad");
> + ep93xx_clk_data->hws[EP93XX_CLK_KEYPAD] = hw;
> +
> + /* On reset PDIV and VDIV is set to zero, while PDIV zero

The /* is on a line by itself.

> + * means clock disable, VDIV shouldn't be zero.
> + * So i set both dividers to minimum.
> + */
> + /* ENA - Enable CLK divider. */
> + /* PDIV - 00 - Disable clock */
> + /* VDIV - at least 2 */
> + /* Check and enable video clk registers */
> + ep93xx_regmap_read(EP93XX_SYSCON_VIDCLKDIV, &value);
> + value |= (1 << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2;
> + ep93xx_syscon_swlocked_write(value, EP93XX_SYSCON_VIDCLKDIV);
> +
> + /* check and enable i2s clk registers */
> + ep93xx_regmap_read(EP93XX_SYSCON_I2SCLKDIV, &value);
> + value |= (1 << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2;
> + /*
> + * Override the SAI_MSTR_CLK_CFG from the I2S block and use the
> + * I2SClkDiv Register settings. LRCLK transitions on the falling SCLK
> + * edge.
> + */
> + value |= EP93XX_SYSCON_I2SCLKDIV_ORIDE | EP93XX_SYSCON_I2SCLKDIV_SPOL;
> + ep93xx_syscon_swlocked_write(value, EP93XX_SYSCON_I2SCLKDIV);
> +
> + /* video clk */
> + hw = clk_hw_register_ddiv("ep93xx-fb",
> + EP93XX_SYSCON_VIDCLKDIV,
> + EP93XX_SYSCON_CLKDIV_ENABLE);
> +
> + clk_hw_register_clkdev(hw, NULL, "ep93xx-fb");
> + ep93xx_clk_data->hws[EP93XX_CLK_VIDEO] = hw;
> +
> + /* i2s clk */
> + hw = clk_hw_register_ddiv("mclk",
> + EP93XX_SYSCON_I2SCLKDIV,
> + EP93XX_SYSCON_CLKDIV_ENABLE);
> +
> + clk_hw_register_clkdev(hw, "mclk", "ep93xx-i2s");
> + ep93xx_clk_data->hws[EP93XX_CLK_I2S_MCLK] = hw;
> +
> + /* i2s sclk */
> +#define EP93XX_I2SCLKDIV_SDIV_SHIFT 16
> +#define EP93XX_I2SCLKDIV_SDIV_WIDTH 1
> + hw = clk_hw_register_div("sclk",
> + "mclk",
> + EP93XX_SYSCON_I2SCLKDIV,
> + EP93XX_SYSCON_I2SCLKDIV_SENA,
> + EP93XX_I2SCLKDIV_SDIV_SHIFT,
> + EP93XX_I2SCLKDIV_SDIV_WIDTH,
> + sclk_divisors,
> + ARRAY_SIZE(sclk_divisors));
> +
> + clk_hw_register_clkdev(hw, "sclk", "ep93xx-i2s");
> + ep93xx_clk_data->hws[EP93XX_CLK_I2S_SCLK] = hw;
> +
> + /* i2s lrclk */
> +#define EP93XX_I2SCLKDIV_LRDIV32_SHIFT 17
> +#define EP93XX_I2SCLKDIV_LRDIV32_WIDTH 2

Please just inline these defines as they're only used on place.

> + hw = clk_hw_register_div("lrclk",
> + "sclk",
> + EP93XX_SYSCON_I2SCLKDIV,
> + EP93XX_SYSCON_I2SCLKDIV_SENA,
> + EP93XX_I2SCLKDIV_LRDIV32_SHIFT,
> + EP93XX_I2SCLKDIV_LRDIV32_WIDTH,
> + lrclk_divisors,
> + ARRAY_SIZE(lrclk_divisors));
> +
> + clk_hw_register_clkdev(hw, "lrclk", "ep93xx-i2s");
> + ep93xx_clk_data->hws[EP93XX_CLK_I2S_LRCLK] = hw;
> +
> + /* IrDa clk uses same pattern but no init code presents in original clock driver */
> + return 0;
> +}
> +
> +static const struct of_device_id ep93xx_clk_dt_ids[] = {
> + { .compatible = "cirrus,ep9301-syscon", },
> + { /* sentinel */ },
> +};
> +
> +static struct platform_driver ep93xx_clk_driver = {
> + .probe = ep93xx_clk_probe,
> + .driver = {
> + .name = "ep93xx-clk",
> + .of_match_table = ep93xx_clk_dt_ids,
> + .suppress_bind_attrs = true,
> + },
> +};
> +builtin_platform_driver(ep93xx_clk_driver);
> +
> +static void __init ep93xx_clock_init(struct device_node *np)
> +{
> + void __iomem *base;
> + int i;
> + int ret;
> + u32 value;
> + struct clk_hw *hw;
> + unsigned long clk_pll1_rate;
> + unsigned long clk_f_rate;
> + unsigned long clk_h_rate;
> + unsigned long clk_p_rate;
> + unsigned long clk_pll2_rate;
> + unsigned int clk_f_div;
> + unsigned int clk_h_div;
> + unsigned int clk_p_div;
> +
> + ep93xx_clk_data = kzalloc(struct_size(ep93xx_clk_data, hws,
> + EP93XX_NUM_CLKS),
> + GFP_KERNEL);
> +
> + if (!ep93xx_clk_data)
> + return;
> +
> + /*
> + * This way all clock fetched before the platform device probes,
> + * except those we assign here for early use, will be deferred.
> + */
> + for (i = 0; i < EP93XX_NUM_CLKS; i++)
> + ep93xx_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER);
> +
> + base = of_iomap(np, 0);
> + /* Remap the system controller for the exclusive register */
> + if (IS_ERR(base)) {
> + pr_err("failed to map base\n");
> + return;
> + }
> +
> + ep93xx_map = syscon_node_to_regmap(np);
> + if (IS_ERR(ep93xx_map)) {
> + pr_err("no syscon regmap\n");
> + return;
> + }
> +
> + /*
> + * We check that the regmap works on this very first access,
> + * but as this is an MMIO-backed regmap, subsequent regmap
> + * access is not going to fail and we skip error checks from
> + * this point.
> + */
> + ret = ep93xx_regmap_read(EP93XX_SYSCON_CHIPID, &value);
> + if (ret || (value & 0xffff) != EP93XX_SYSCON_CHIPID_ID) {
> + pr_err("failed to read global status register\n");
> + return;
> + }
> +
> + hw = clk_hw_register_fixed_rate(NULL, "xtali", NULL, 0, EP93XX_EXT_CLK_RATE);

Maybe this can be registered from DT itself.

> + clk_hw_register_clkdev(hw, NULL, "xtali");
> +
> + /* Determine the bootloader configured pll1 rate */
> + ep93xx_regmap_read(EP93XX_SYSCON_CLKSET1, &value);
> + if (!(value & EP93XX_SYSCON_CLKSET1_NBYP1))
> + clk_pll1_rate = EP93XX_EXT_CLK_RATE;
> + else
> + clk_pll1_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value);
> +
> + hw = clk_hw_register_fixed_rate(NULL, "pll1", "xtali", 0, clk_pll1_rate);

And maybe this can be registered from wherever the regmap is created?

> + clk_hw_register_clkdev(hw, NULL, "pll1");

Do you need to use clkdev?

> + ep93xx_clk_data->hws[EP93XX_CLK_PLL1] = hw;
> +
> + /* Initialize the pll1 derived clocks */
> + clk_f_div = fclk_divisors[(value >> 25) & 0x7];
> + clk_h_div = hclk_divisors[(value >> 20) & 0x7];
> + clk_p_div = pclk_divisors[(value >> 18) & 0x3];
> +
> + hw = clk_hw_register_fixed_factor(NULL, "fclk", "pll1", 0, 1, clk_f_div);
> + clk_f_rate = clk_get_rate(hw->clk);
> + ep93xx_clk_data->hws[EP93XX_CLK_FCLK] = hw;
> + hw = clk_hw_register_fixed_factor(NULL, "hclk", "pll1", 0, 1, clk_h_div);
> + clk_h_rate = clk_get_rate(hw->clk);
> + ep93xx_clk_data->hws[EP93XX_CLK_HCLK] = hw;
> + hw = clk_hw_register_fixed_factor(NULL, "pclk", "hclk", 0, 1, clk_p_div);
> + clk_p_rate = clk_get_rate(hw->clk);
> + ep93xx_clk_data->hws[EP93XX_CLK_PCLK] = hw;

Try to not use clk consumer APIs from a clk provider. In this case, it
looks like some debug message, so just drop these clk_get_rate() calls
and the associated printks.

> +
> + clk_hw_register_clkdev(hw, "apb_pclk", NULL);
> +
> + ep93xx_dma_clock_init(base);

Does some interrupt or timer driver use dma? Why are these registered
early?

> +
> + /* Determine the bootloader configured pll2 rate */
> + ep93xx_regmap_read(EP93XX_SYSCON_CLKSET2, &value);
> + if (!(value & EP93XX_SYSCON_CLKSET2_NBYP2))
> + clk_pll2_rate = EP93XX_EXT_CLK_RATE;
> + else if (value & EP93XX_SYSCON_CLKSET2_PLL2_EN)
> + clk_pll2_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value);
> + else
> + clk_pll2_rate = 0;
> +
> + hw = clk_hw_register_fixed_rate(NULL, "pll2", "xtali", 0, clk_pll2_rate);

Instead of registering a fixed rate clk here you can implemented
recalc_rate and look at the regmap value.

> + ep93xx_clk_data->hws[EP93XX_CLK_PLL2] = hw;
> + clk_hw_register_clkdev(hw, NULL, "pll2");
> +
> + ep93xx_clk_data->num = EP93XX_NUM_CLKS;
> + of_clk_add_hw_provider(np, of_clk_hw_onecell_get, ep93xx_clk_data);
> +
> + pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
> + clk_pll1_rate / 1000000, clk_pll2_rate / 1000000);
> + pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
> + clk_f_rate / 1000000, clk_h_rate / 1000000,
> + clk_p_rate / 1000000);
> +}
> +CLK_OF_DECLARE_DRIVER(ep93xx_cc, "cirrus,ep9301-syscon", ep93xx_clock_init);