[PATCH 2/2] mfd: stpmic1: add pmic poweroff via sys-off handler

[Sean Nyekjaer]

Use devm_register_sys_off_handler() that allows to register multiple
power-off handlers.

This can be enabled by adding "st,pmic-poweroff" to device-tree.

Signed-off-by: Sean Nyekjaer <sean@xxxxxxxxxx>
---
 drivers/mfd/stpmic1.c | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/drivers/mfd/stpmic1.c b/drivers/mfd/stpmic1.c
index 4c9b18d9dec8..c628141eb03c 100644
--- a/drivers/mfd/stpmic1.c
+++ b/drivers/mfd/stpmic1.c
@@ -7,6 +7,7 @@
 #include <linux/mfd/core.h>
 #include <linux/mfd/stpmic1.h>
 #include <linux/module.h>
+#include <linux/reboot.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
@@ -117,6 +118,33 @@ static const struct regmap_irq_chip stpmic1_regmap_irq_chip = {
 	.num_irqs = ARRAY_SIZE(stpmic1_irqs),
 };
 
+static int stpmic1_power_off(struct sys_off_data *data)
+{
+	struct stpmic1 *ddata = data->cb_data;
+
+	regmap_update_bits(ddata->regmap, MAIN_CR,
+			   SOFTWARE_SWITCH_OFF, SOFTWARE_SWITCH_OFF);
+
+	return NOTIFY_DONE;
+}
+
+static int stpmic1_power_off_prepare_init(struct stpmic1 *ddata)
+{
+	int ret;
+
+	ret = devm_register_sys_off_handler(ddata->dev,
+					    SYS_OFF_MODE_POWER_OFF,
+					    SYS_OFF_PRIO_DEFAULT,
+					    stpmic1_power_off,
+					    ddata);
+	if (ret) {
+		dev_err(ddata->dev, "failed to register sys-off handler: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static int stpmic1_probe(struct i2c_client *i2c)
 {
 	struct stpmic1 *ddata;
@@ -159,6 +187,12 @@ static int stpmic1_probe(struct i2c_client *i2c)
 		return ret;
 	}
 
+	if (of_property_read_bool(i2c->dev.of_node,  "st,pmic-poweroff")) {
+		ret = stpmic1_power_off_prepare_init(ddata);
+		if (ret)
+			return ret;
+	}
+
 	return devm_of_platform_populate(dev);
 }
 
-- 
2.40.0