Re: [PATCH v3 4/7] arm64: dts: allwinner: a64: reset pll-video0 rate

[Jernej Škrabec]

Dne četrtek, 27. april 2023 ob 11:16:08 CEST je Roman Beranek napisal(a):
> With pll-mipi as its source clock, the exact rate to which TCON0's data
> clock can be set to is constrained by the current rate of pll-video0.
> Unless changed on a request of another consumer, the rate of pll-video0
> is left as inherited from the bootloader.
> 
> The default rate on reset is 297 MHz, a value preferable to what it is
> later set to in u-boot (294 MHz). This happens unintentionally though,
> as u-boot, for the sake of simplicity, rounds the rate requested by DE2
> driver (297 MHz) to 6 MHz steps.
> 
> Reset the PLL to its default rate of 297 MHz.

Why would that be preferable? You actually dropped "clk: sunxi-ng: a64: 
propagate rate change from pll-mipi" patch which would take care for adjusting 
parent rate to correct value.

Best regards,
Jernej

> 
> Signed-off-by: Roman Beranek <me@xxxxxxx>
> ---
>  arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index
> e6a194db420d..cfc60dce80b0 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> @@ -667,6 +667,9 @@ ccu: clock@1c20000 {
>  			clock-names = "hosc", "losc";
>  			#clock-cells = <1>;
>  			#reset-cells = <1>;
> +
> +			assigned-clocks = <&ccu CLK_PLL_VIDEO0>;
> +			assigned-clock-rates = <297000000>;
>  		};
> 
>  		pio: pinctrl@1c20800 {