Re: [PATCH v2 net-next 2/6] dt-bindings: net: Brcm ASP 2.0 Ethernet controller

[Rob Herring]

On Wed, Apr 26, 2023 at 11:54:28AM -0700, Justin Chen wrote:
> From: Florian Fainelli <f.fainelli@xxxxxxxxx>
> 
> Add a binding document for the Broadcom ASP 2.0 Ethernet
> controller.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
> Signed-off-by: Justin Chen <justinpopo6@xxxxxxxxx>
> ---
>  .../devicetree/bindings/net/brcm,asp-v2.0.yaml     | 145 +++++++++++++++++++++
>  1 file changed, 145 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
> new file mode 100644
> index 000000000000..818d91692e6e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
> @@ -0,0 +1,145 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/brcm,asp-v2.0.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom ASP 2.0 Ethernet controller
> +
> +maintainers:
> +  - Justin Chen <justinpopo6@xxxxxxxxx>
> +  - Florian Fainelli <f.fainelli@xxxxxxxxx>
> +
> +description: Broadcom Ethernet controller first introduced with 72165
> +
> +properties:
> +  '#address-cells':
> +    const: 1
> +  '#size-cells':
> +    const: 1
> +
> +  compatible:
> +    enum:
> +      - brcm,asp-v2.0
> +      - brcm,bcm72165-asp-v2.0
> +      - brcm,asp-v2.1
> +      - brcm,bcm74165-asp-v2.1

You have 1 SoC per version, so what's the point of versions? If you have 
more coming, then fine, but I'd expect it to be something like this:

compatible = "brcm,bcm74165-asp-v2.1", "brcm,asp-v2.1";

Also, the version in the SoC specific compatible is redundant. Just 
"brcm,bcm74165-asp" is enough.

v2.1 is not compatible with v2.0? What that means is would a client/OS 
that only understands what v2.0 is work with v2.1 h/w? If so, you should 
have fallback compatible.

> +
> +  reg:
> +    maxItems: 1
> +
> +  ranges: true
> +
> +  interrupts:
> +    minItems: 1
> +    items:
> +      - description: RX/TX interrupt
> +      - description: Port 0 Wake-on-LAN
> +      - description: Port 1 Wake-on-LAN
> +
> +  clocks:
> +    maxItems: 1
> +
> +  ethernet-ports:

The ethernet-switch.yaml schema doesn't work for you?

> +    type: object
> +    properties:
> +      '#address-cells':
> +        const: 1
> +      '#size-cells':
> +        const: 0
> +
> +    patternProperties:
> +      "^port@[0-9]+$":
> +        type: object
> +
> +        $ref: ethernet-controller.yaml#
> +
> +        properties:
> +          reg:
> +            maxItems: 1
> +            description: Port number
> +
> +          channel:
> +            maxItems: 1
> +            description: ASP channel number

Not a standard property, so it needs a type and vendor prefix. However, 
what's the difference between channel and port? Can the port numbers 
correspond to the channels?

> +
> +        required:
> +          - reg
> +          - channel
> +
> +    additionalProperties: false
> +
> +patternProperties:
> +  "^mdio@[0-9a-f]+$":
> +    type: object
> +    $ref: "brcm,unimac-mdio.yaml"

Drop quotes.

> +
> +    description:
> +      ASP internal UniMAC MDIO bus
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - ranges
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    ethernet@9c00000 {
> +        compatible = "brcm,asp-v2.0";
> +        reg = <0x9c00000 0x1fff14>;
> +        interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
> +        ranges;
> +        clocks = <&scmi 14>;
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +
> +        mdio@c614 {
> +            compatible = "brcm,asp-v2.0-mdio";
> +            reg = <0xc614 0x8>;

You have 1:1 ranges, is that really what you want? That means 0xc614 is 
an absolute address.

> +            reg-names = "mdio";
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            phy0: ethernet-phy@1 {
> +                reg = <1>;
> +            };
> +       };
> +
> +        mdio@ce14 {
> +            compatible = "brcm,asp-v2.0-mdio";
> +            reg = <0xce14 0x8>;
> +            reg-names = "mdio";
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            phy1: ethernet-phy@1 {
> +                reg = <1>;
> +            };
> +        };
> +
> +        ethernet-ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            port@0 {
> +                reg = <0>;
> +                channel = <8>;
> +                phy-mode = "rgmii";
> +                phy-handle = <&phy0>;
> +            };
> +
> +            port@1 {
> +                reg = <1>;
> +                channel = <9>;
> +                phy-mode = "rgmii";
> +                phy-handle = <&phy1>;
> +            };
> +        };
> +    };
> -- 
> 2.7.4
>