[PATCH 08/11] leds: trigger: netdev: add support for LED hw control

[Christian Marangi]

Add support for LED hw control for the netdev trigger.

The trigger on calling set_baseline_state to configure a new mode, will
do various check to verify if hw control can be used for the requested
mode in the validate_requested_mode() function.

It will first check if the LED driver supports hw control for the netdev
trigger, then will check if the requested mode are in the trigger mode
mask and finally will call hw_control_set() to apply the requested mode.

To use such mode, interval MUST be set to the default value and net_dev
MUST be empty. If one of these 2 value are not valid, hw control will
never be used and normal software fallback is used.

Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
---
 drivers/leds/trigger/ledtrig-netdev.c | 52 +++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/drivers/leds/trigger/ledtrig-netdev.c b/drivers/leds/trigger/ledtrig-netdev.c
index 8cd876647a27..61bc19fd0c7a 100644
--- a/drivers/leds/trigger/ledtrig-netdev.c
+++ b/drivers/leds/trigger/ledtrig-netdev.c
@@ -68,6 +68,13 @@ static void set_baseline_state(struct led_netdev_data *trigger_data)
 	int current_brightness;
 	struct led_classdev *led_cdev = trigger_data->led_cdev;
 
+	/* Already validated, hw control is possible with the requested mode */
+	if (trigger_data->hw_control) {
+		led_cdev->hw_control_set(led_cdev, trigger_data->mode);
+
+		return;
+	}
+
 	current_brightness = led_cdev->brightness;
 	if (current_brightness)
 		led_cdev->blink_brightness = current_brightness;
@@ -95,6 +102,51 @@ static void set_baseline_state(struct led_netdev_data *trigger_data)
 static int validate_requested_mode(struct led_netdev_data *trigger_data,
 				   unsigned long mode, bool *can_use_hw_control)
 {
+	unsigned int interval = atomic_read(&trigger_data->interval);
+	unsigned long hw_supported_mode, hw_mode = 0, sw_mode = 0;
+	struct led_classdev *led_cdev = trigger_data->led_cdev;
+	unsigned long default_interval = msecs_to_jiffies(50);
+	bool force_sw = false;
+	int i, ret;
+
+	hw_supported_mode = led_cdev->trigger_supported_flags_mask;
+
+	/* Check if trigger can use hw control */
+	if (!led_trigger_can_hw_control(led_cdev))
+		force_sw = true;
+
+	/* Compose a list of mode that can run in hw or sw */
+	for (i = 0; i < __TRIGGER_NETDEV_MAX; i++) {
+		/* Skip checking mode not active */
+		if (!test_bit(i, &mode))
+			continue;
+
+		/* net_dev is not supported and must be empty for hw control.
+		 * interval must be set to the default value. Any different
+		 * value is rejected if in hw control.
+		 */
+		if (interval == default_interval && !trigger_data->net_dev &&
+		    !force_sw && test_bit(i, &hw_supported_mode))
+			set_bit(i, &hw_mode);
+		else
+			set_bit(i, &sw_mode);
+	}
+
+	/* We can't run modes handled by both sw and hw */
+	if (sw_mode && hw_mode)
+		return -EINVAL;
+
+	/* Exit early if we are using software fallback */
+	if (sw_mode)
+		return 0;
+
+	/* Check if the requested mode is supported */
+	ret = led_cdev->hw_control_is_supported(led_cdev, hw_mode);
+	if (ret)
+		return ret;
+
+	*can_use_hw_control = true;
+
 	return 0;
 }
 
-- 
2.39.2