Re: [PATCH v3 2/3] mfd: axp20x: Add support for AXP15060 PMIC

[Lee Jones]

On Fri, 21 Apr 2023, Shengyu Qu wrote:

> The AXP15060 is a PMIC chip produced by X-Powers, and could be connected
> via an I2C bus.
> 
> Describe the regmap and the MFD bits, along with the registers exposed
> via I2C. Eventually advertise the device using a new compatible string
> and add support for power off the system.
> 
> The driver would disable PEK function if IRQ is not configured in device
> tree, since some boards (For example, Starfive Visionfive 2) didn't
> connect IRQ line of PMIC to SOC.
> 
> GPIO function isn't enabled in this commit, since its configuration
> operation is different from any existing AXP PMICs and needs
> logic modification on existing driver. GPIO support might come in later
> patches.
> 
> ---

You must not use these above the tags or Git will drop them.

> Changes since v2:
>  - Rebase to AXP313a series v10 [1] + newest (20230420) -next branch
>  - Add axp_regulator_only_cells rather than directly using axp806_cells
>    for cases that IRQ line isn't connected.
> 
> Changes since v1:
>  - Nothing
> 
> [1] https://lore.kernel.org/linux-sunxi/20230401001850.4988-1-andre.przywara@xxxxxxx/
> 
> Signed-off-by: Shengyu Qu <wiagn233@xxxxxxxxxxx>
> ---

Put change-logs here instead.

>  drivers/mfd/axp20x-i2c.c   |   2 +
>  drivers/mfd/axp20x.c       | 107 +++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/axp20x.h |  85 +++++++++++++++++++++++++++++
>  3 files changed, 194 insertions(+)

I manually added the missing tags for this and the DT patch and applied.

-- 
Lee Jones [李琼斯]