Re: [RFC PATCH 1/2] arm64: dts: ti: k3-j721s2-main: Add main CPSW2G devicetree node

From: Andrew Davis
Date: Wed Apr 26 2023 - 09:22:00 EST


On 4/26/23 7:59 AM, Nishanth Menon wrote:
On 16:27-20230426, Siddharth Vadapalli wrote:
From: Kishon Vijay Abraham I <kishon@xxxxxx>

TI's J721S2 SoC has a MAIN CPSW2G instance of the CPSW Ethernet Switch.
Add devicetree node for it.

Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx>
---
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 69 ++++++++++++++++++++++
1 file changed, 69 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 6629b2989180..14dfef7b0758 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -51,6 +51,12 @@ usb_serdes_mux: mux-controller@0 {
mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
};
+ phy_gmii_sel_cpsw: phy@34 {
+ compatible = "ti,am654-phy-gmii-sel";
+ reg = <0x34 0x4>;
+ #phy-cells = <1>;
+ };


See this thread: https://lore.kernel.org/all/76da0b98-3274-b047-db11-ecabc117ae11@xxxxxx/


"ti,am654-phy-gmii-sel" already has "reg", so this DT is good as is.
Adding the driver fallback to use that when the parent is not a "syscon"
node should be as easy as this:

--- a/drivers/phy/ti/phy-gmii-sel.c
+++ b/drivers/phy/ti/phy-gmii-sel.c
@@ -435,9 +435,12 @@ static int phy_gmii_sel_probe(struct platform_device *pdev)
priv->regmap = syscon_node_to_regmap(node->parent);
if (IS_ERR(priv->regmap)) {
- ret = PTR_ERR(priv->regmap);
- dev_err(dev, "Failed to get syscon %d\n", ret);
- return ret;
+ priv->regmap = device_node_to_regmap(node);
+ if (IS_ERR(priv->regmap)) {
+ ret = PTR_ERR(priv->regmap);
+ dev_err(dev, "Failed to get syscon %d\n", ret);
+ return ret;
+ }
}


I'll send this patch when the window opens.

Andrew