Re: [PATCH] Fix freeze in lm8333 i2c keyboard driver

[Jeff LaBundy]

Hi Tomas,

On Tue, Apr 25, 2023 at 03:00:53PM +0200, Tomas Mudrunka wrote:
> LM8333 uses gpio interrupt line which is active-low.
> When interrupt is set to FALLING edge and button is pressed
> before driver loads, driver will miss the edge and never respond.
> To fix this we handle ONESHOT LOW interrupt rather than edge.
> 
> Signed-off-by: Tomas Mudrunka <tomas.mudrunka@xxxxxxxxx>
> ---
>  drivers/input/keyboard/lm8333.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/input/keyboard/lm8333.c b/drivers/input/keyboard/lm8333.c
> index 7457c3220..c5770ebb2 100644
> --- a/drivers/input/keyboard/lm8333.c
> +++ b/drivers/input/keyboard/lm8333.c
> @@ -179,7 +179,7 @@ static int lm8333_probe(struct i2c_client *client)
>  	}
>  
>  	err = request_threaded_irq(client->irq, NULL, lm8333_irq_thread,
> -				   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> +				   IRQF_TRIGGER_LOW | IRQF_ONESHOT,
>  				   "lm8333", lm8333);
>  	if (err)
>  		goto free_mem;

Thanks for the patch, but this is a NAK in my opinion.

First of all, we should not be hard-coding interrupt polarity in the
first place; that is an existing piece of technical debt in this driver.

Second, changing from edge-triggered to level-triggered interrupts runs
the risk of creating an interrupt storm depending on the time it takes
the device to deassert the irq following the I2C read and the point at
which the threaded handler returns. Have you measured this?

Can we not simply read the interrupt status registers once at start-up
to clear any pending status? This is essentially what your change does
anyway, albeit indirectly.

> -- 
> 2.40.0
> 

Kind regards,
Jeff LaBundy