Re: [PATCH] arm: dts: k3-am62a7-sk: Describe main_uart1 and wkup_uart

[Nishanth Menon]

Please fix $subject: arm64: dts: ti:

On 13:33-20230424, Bryan Brattlof wrote:
> From: Nishanth Menon <nm@xxxxxx>
> 
> wkup_uart and main_uart1 on this platform is used by tifs and DM
> firmwares. Describe them for completeness including the pinmux.
> 
> Signed-off-by: Nishanth Menon <nm@xxxxxx>
> [bb@xxxxxx: updated pinmux]
> Signed-off-by: Bryan Brattlof <bb@xxxxxx>
> ---
>  arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 40 +++++++++++++++++++++++--
>  1 file changed, 38 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> index f6a67f072dca6..65caa5611d6d5 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> @@ -17,7 +17,9 @@ / {
>  	model = "Texas Instruments AM62A7 SK";
>  
>  	aliases {
> +		serial0 = &wkup_uart0;
>  		serial2 = &main_uart0;
> +		serial3 = &main_uart1;
>  		mmc1 = &sdhci1;
>  	};
>  
> @@ -114,11 +116,38 @@ led-0 {
>  	};
>  };
>  
> +&mcu_pmx0 {
> +	wkup_uart0_pins_default: wkup-uart0-pins-default {
> +		pinctrl-single,pins = <
> +			AM62AX_MCU_IOPAD(0x0024, PIN_INPUT, 0) /* (C9) WKUP_UART0_RXD */
> +			AM62AX_MCU_IOPAD(0x0028, PIN_OUTPUT, 0) /* (E9) WKUP_UART0_TXD */
> +			AM62AX_MCU_IOPAD(0x002c, PIN_INPUT, 0) /* (C10) WKUP_UART0_CTSn */
> +			AM62AX_MCU_IOPAD(0x0030, PIN_OUTPUT, 0) /* (C8) WKUP_UART0_RTSn */
> +		>;
> +	};
> +};
> +
> +/* WKUP UART0 is used for DM firmware logs */
> +&wkup_uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&wkup_uart0_pins_default>;
> +	status = "reserved";
> +};
> +
>  &main_pmx0 {
>  	main_uart0_pins_default: main-uart0-pins-default {
>  		pinctrl-single,pins = <
> -			AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
> -			AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
> +			AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (E14) UART0_RXD */
> +			AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */
> +		>;
> +	};
> +
> +	main_uart1_pins_default: main-uart1-pins-default {
> +		pinctrl-single,pins = <
> +			AM62AX_IOPAD(0x01e8, PIN_INPUT, 1) /* (C17) I2C1_SCL.UART1_RXD */
> +			AM62AX_IOPAD(0x01ec, PIN_OUTPUT, 1) /* (E17) I2C1_SDA.UART1_TXD */
> +			AM62AX_IOPAD(0x0194, PIN_INPUT, 2) /* (C19) MCASP0_AXR3.UART1_CTSn */
> +			AM62AX_IOPAD(0x0198, PIN_OUTPUT, 2) /* (B19) MCASP0_AXR2.UART1_RTSn */
>  		>;
>  	};
>  
> @@ -254,6 +283,13 @@ &main_uart0 {
>  	pinctrl-0 = <&main_uart0_pins_default>;
>  };
>  
> +/* Main UART1 is used for TIFS firmware logs */
> +&main_uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&main_uart1_pins_default>;
> +	status = "reserved";
> +};
> +
>  &usbss1 {
>  	status = "okay";
>  };
> 
> base-commit: 891db0c48efb48c3af334006f9d7ea6a0aa49cb9
> -- 
> 2.40.0
> 

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D