Re: [PATCH v5 7/7] riscv: dts: starfive: Add USB dts configuration for JH7110

[Roger Quadros]

On 20/04/2023 14:00, Minda Chen wrote:
> Add USB wrapper layer and Cadence USB3 controller dts
> configuration for StarFive JH7110 SoC and VisionFive2
> Board.
> USB controller connect to PHY, The PHY dts configuration
> are also added.
> 
> Signed-off-by: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
> ---
>  .../jh7110-starfive-visionfive-2.dtsi         |  7 +++
>  arch/riscv/boot/dts/starfive/jh7110.dtsi      | 44 +++++++++++++++++++
>  2 files changed, 51 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> index 1155b97b593d..fa97ebfd93ad 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> @@ -221,3 +221,10 @@
>  	pinctrl-0 = <&uart0_pins>;
>  	status = "okay";
>  };
> +
> +&usb0 {
> +	phys = <&usbphy0>;
> +	phy-names = "usb2";
> +	dr_mode = "peripheral";
> +	status = "okay";
> +};
> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> index 29cd798b6732..eee395e19cdb 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> @@ -366,6 +366,50 @@
>  			status = "disabled";
>  		};
>  
> +		usb0: usb@10100000 {
> +			compatible = "starfive,jh7110-usb";
> +			reg = <0x0 0x10100000 0x0 0x10000>,
> +			      <0x0 0x10110000 0x0 0x10000>,
> +			      <0x0 0x10120000 0x0 0x10000>;
> +			reg-names = "otg", "xhci", "dev";
> +			interrupts = <100>, <108>, <110>;
> +			interrupt-names = "host", "peripheral", "otg";
> +			clocks = <&stgcrg JH7110_STGCLK_USB0_LPM>,
> +				 <&stgcrg JH7110_STGCLK_USB0_STB>,
> +				 <&stgcrg JH7110_STGCLK_USB0_APB>,
> +				 <&stgcrg JH7110_STGCLK_USB0_AXI>,
> +				 <&stgcrg JH7110_STGCLK_USB0_UTMI_APB>;
> +			clock-names = "lpm", "stb", "apb", "axi", "utmi_apb";
> +			resets = <&stgcrg JH7110_STGRST_USB0_PWRUP>,
> +				 <&stgcrg JH7110_STGRST_USB0_APB>,
> +				 <&stgcrg JH7110_STGRST_USB0_AXI>,
> +				 <&stgcrg JH7110_STGRST_USB0_UTMI_APB>;
> +			reset-names = "pwrup", "apb", "axi", "utmi_apb";

All this can really be "cdns,usb3" node. The cdns,usb3 driver should
do reset and clocks init as it is generic.

> +			starfive,stg-syscon = <&stg_syscon 0x4>;
> +			status = "disabled";

Only the syscon handling looks starfive specific so only that handling
should be done in starfive USB driver.

This node should look like this

 
	starfive-usb@4 {
		compatible = "starfive,jh7110-usb";
		starfive,stg-syscon = <&stg_syscon 0x4>;

		usb0: usb@10100000 {
			compatible = "cdns,usb3";
			reg = <0x0 0x10100000 0x0 0x10000>,
			      <0x0 0x10110000 0x0 0x10000>,
			      <0x0 0x10120000 0x0 0x10000>;
			reg-names = "otg", "xhci", "dev";
			interrupts = <100>, <108>, <110>;
			interrupt-names = "host", "peripheral", "otg";
			clocks = <&stgcrg JH7110_STGCLK_USB0_LPM>,
				 <&stgcrg JH7110_STGCLK_USB0_STB>,
				 <&stgcrg JH7110_STGCLK_USB0_APB>,
				 <&stgcrg JH7110_STGCLK_USB0_AXI>,
				 <&stgcrg JH7110_STGCLK_USB0_UTMI_APB>;
			clock-names = "lpm", "stb", "apb", "axi", "utmi_apb";
			resets = <&stgcrg JH7110_STGRST_USB0_PWRUP>,
				 <&stgcrg JH7110_STGRST_USB0_APB>,
				 <&stgcrg JH7110_STGRST_USB0_AXI>,
				 <&stgcrg JH7110_STGRST_USB0_UTMI_APB>;
			reset-names = "pwrup", "apb", "axi", "utmi_apb";
			starfive,stg-syscon = <&stg_syscon 0x4>;
			status = "disabled";
		};
	}

In starfife-usb driver you can use of_platform_default_populate()
to create the cdns,usb3 child for you.

> +		};
> +
> +		usbphy0: phy@10200000 {
> +			compatible = "starfive,jh7110-usb-phy";
> +			reg = <0x0 0x10200000 0x0 0x10000>;
> +			clocks = <&syscrg JH7110_SYSCLK_USB_125M>,
> +				 <&stgcrg JH7110_STGCLK_USB0_APP_125>;
> +			clock-names = "125m", "app_125m";
> +			#phy-cells = <0>;
> +		};
> +
> +		pciephy0: phy@10210000 {
> +			compatible = "starfive,jh7110-pcie-phy";
> +			reg = <0x0 0x10210000 0x0 0x10000>;
> +			#phy-cells = <0>;
> +		};
> +
> +		pciephy1: phy@10220000 {
> +			compatible = "starfive,jh7110-pcie-phy";
> +			reg = <0x0 0x10220000 0x0 0x10000>;
> +			#phy-cells = <0>;
> +		};
> +
>  		stgcrg: clock-controller@10230000 {
>  			compatible = "starfive,jh7110-stgcrg";
>  			reg = <0x0 0x10230000 0x0 0x10000>;

cheers,
-roger