Re: [PATCH v5 3/7] phy: starfive: Add JH7110 USB 2.0 PHY driver

[Roger Quadros]

Hi Minda,

On 20/04/2023 14:00, Minda Chen wrote:
> Add Starfive JH7110 SoC USB 2.0 PHY driver support.
> USB 2.0 PHY default connect to Cadence USB controller.
> 
> Signed-off-by: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
> ---
>  MAINTAINERS                           |   6 +
>  drivers/phy/starfive/Kconfig          |  11 ++
>  drivers/phy/starfive/Makefile         |   1 +
>  drivers/phy/starfive/phy-jh7110-usb.c | 162 ++++++++++++++++++++++++++
>  4 files changed, 180 insertions(+)
>  create mode 100644 drivers/phy/starfive/phy-jh7110-usb.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 1aef5ba46d71..c09ea66dcd5a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19968,6 +19968,12 @@ M:	William Qiu <william.qiu@xxxxxxxxxxxxxxxx>
>  S:	Supported
>  F:	Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
>  
> +STARFIVE JH71X0 USB PHY DRIVER
> +M:	Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
> +S:	Supported
> +F:	Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
> +F:	drivers/phy/starfive/phy-jh7110-usb.c
> +
>  STATIC BRANCH/CALL
>  M:	Peter Zijlstra <peterz@xxxxxxxxxxxxx>
>  M:	Josh Poimboeuf <jpoimboe@xxxxxxxxxx>
> diff --git a/drivers/phy/starfive/Kconfig b/drivers/phy/starfive/Kconfig
> index f989b8ff8bcb..2c013c390dee 100644
> --- a/drivers/phy/starfive/Kconfig
> +++ b/drivers/phy/starfive/Kconfig
> @@ -11,3 +11,14 @@ config PHY_STARFIVE_DPHY_RX
>  	  Choose this option if you have a StarFive D-PHY in your
>  	  system. If M is selected, the module will be called
>  	  phy-starfive-dphy-rx.
> +
> +config PHY_STARFIVE_JH7110_USB
> +	tristate "Starfive JH7110 USB 2.0 PHY support"
> +	depends on USB_SUPPORT
> +	select GENERIC_PHY
> +	select USB_PHY
> +	help
> +	  Enable this to support the StarFive USB 2.0 PHY,
> +	  used with the Cadence USB controller.
> +	  If M is selected, the module will be called
> +	  phy-jh7110-usb.ko.
> diff --git a/drivers/phy/starfive/Makefile b/drivers/phy/starfive/Makefile
> index 7ec576cb30ae..176443852f4d 100644
> --- a/drivers/phy/starfive/Makefile
> +++ b/drivers/phy/starfive/Makefile
> @@ -1,2 +1,3 @@
>  # SPDX-License-Identifier: GPL-2.0
>  obj-$(CONFIG_PHY_STARFIVE_DPHY_RX)      += phy-starfive-dphy-rx.o
> +obj-$(CONFIG_PHY_STARFIVE_JH7110_USB)	+= phy-jh7110-usb.o
> diff --git a/drivers/phy/starfive/phy-jh7110-usb.c b/drivers/phy/starfive/phy-jh7110-usb.c
> new file mode 100644
> index 000000000000..4a12df0692cd
> --- /dev/null
> +++ b/drivers/phy/starfive/phy-jh7110-usb.c
> @@ -0,0 +1,162 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * StarFive JH7110 USB 2.0 PHY driver
> + *
> + * Copyright (C) 2023 StarFive Technology Co., Ltd.
> + * Author: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/usb/of.h>
> +
> +#define USB_125M_CLK_RATE		125000000
> +#define USB_LS_KEEPALIVE_OFF		0x4
> +#define USB_LS_KEEPALIVE_ENABLE		BIT(4)
> +
> +struct jh7110_usb2_phy {
> +	struct phy *phy;
> +	void __iomem *regs;
> +	struct clk *usb_125m_clk;
> +	struct clk *app_125m;
> +	enum phy_mode mode;
> +};
> +
> +static void jh7110_usb2_mode_set(struct jh7110_usb2_phy *phy)
> +{
> +	unsigned int val;
> +
> +	if (phy->mode != PHY_MODE_USB_HOST) {
> +		/* Enable the LS speed keep-alive signal */
> +		val = readl(phy->regs + USB_LS_KEEPALIVE_OFF);
> +		val |= USB_LS_KEEPALIVE_ENABLE;
> +		writel(val, phy->regs + USB_LS_KEEPALIVE_OFF);
> +	}
> +}
> +
> +static int jh7110_usb2_phy_set_mode(struct phy *_phy,
> +				    enum phy_mode mode, int submode)
> +{
> +	struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy);
> +
> +	switch (mode) {
> +	case PHY_MODE_USB_HOST:
> +	case PHY_MODE_USB_DEVICE:
> +	case PHY_MODE_USB_OTG:
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	if (mode != phy->mode) {
> +		dev_info(&_phy->dev, "Changing phy to %d\n", mode);

dev_dbg() please?

> +		phy->mode = mode;
> +		jh7110_usb2_mode_set(phy);
> +	}
> +
> +	return 0;
> +}
> +
> +static int jh7110_usb2_phy_init(struct phy *_phy)
> +{
> +	struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy);
> +	int ret;
> +
> +	ret = clk_set_rate(phy->usb_125m_clk, USB_125M_CLK_RATE);
> +	if (ret)
> +		return ret;
> +
> +	ret = clk_prepare_enable(phy->app_125m);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static int jh7110_usb2_phy_exit(struct phy *_phy)
> +{
> +	struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy);
> +
> +	clk_disable_unprepare(phy->app_125m);
> +
> +	return 0;
> +}
> +
> +static const struct phy_ops jh7110_usb2_phy_ops = {
> +	.init		= jh7110_usb2_phy_init,
> +	.exit		= jh7110_usb2_phy_exit,
> +	.set_mode	= jh7110_usb2_phy_set_mode,
> +	.owner		= THIS_MODULE,
> +};
> +
> +static int jh7110_usb_phy_probe(struct platform_device *pdev)
> +{
> +	struct jh7110_usb2_phy *phy;
> +	struct device *dev = &pdev->dev;
> +	struct phy_provider *phy_provider;
> +
> +	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
> +	if (!phy)
> +		return -ENOMEM;
> +
> +	phy->usb_125m_clk = devm_clk_get(dev, "125m");
> +	if (IS_ERR(phy->usb_125m_clk))
> +		return dev_err_probe(dev, PTR_ERR(phy->usb_125m_clk),
> +			"Failed to get 125m clock\n");
> +
> +	phy->app_125m = devm_clk_get(dev, "app_125m");
> +	if (IS_ERR(phy->app_125m))
> +		return dev_err_probe(dev, PTR_ERR(phy->app_125m),
> +			"Failed to get app 125m clock\n");
> +
> +	phy->regs = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(phy->regs))
> +		return dev_err_probe(dev, PTR_ERR(phy->regs),
> +			"Failed to map phy base\n");
> +
> +	phy->phy = devm_phy_create(dev, NULL, &jh7110_usb2_phy_ops);
> +	if (IS_ERR(phy->phy))
> +		return dev_err_probe(dev, PTR_ERR(phy->phy),
> +			"Failed to create phy\n");
> +
> +	platform_set_drvdata(pdev, phy);
> +	phy_set_drvdata(phy->phy, phy);
> +	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +
> +	return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static int jh7110_usb_phy_remove(struct platform_device *pdev)
> +{
> +	struct jh7110_usb2_phy *phy = platform_get_drvdata(pdev);
> +
> +	clk_disable_unprepare(phy->app_125m);

Why do you need to do clk_disable here? You didn't enable it in probe.

> +	platform_set_drvdata(pdev, NULL);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id jh7110_usb_phy_of_match[] = {
> +	{ .compatible = "starfive,jh7110-usb-phy" },
> +	{ /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, jh7110_usb_phy_of_match);
> +
> +static struct platform_driver jh7110_usb_phy_driver = {
> +	.probe	= jh7110_usb_phy_probe,
> +	.remove	= jh7110_usb_phy_remove,
> +	.driver = {
> +		.of_match_table	= jh7110_usb_phy_of_match,
> +		.name  = "jh7110-usb-phy",
> +	}
> +};
> +module_platform_driver(jh7110_usb_phy_driver);
> +
> +MODULE_DESCRIPTION("StarFive JH7110 USB 2.0 PHY driver");
> +MODULE_AUTHOR("Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>");
> +MODULE_LICENSE("GPL");

cheers,
-roger