Re: [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add SDX75 pinctrl devicetree compatible

From: Rob Herring
Date: Fri Apr 21 2023 - 12:09:28 EST



On Fri, 21 Apr 2023 17:52:49 +0530, Rohit Agarwal wrote:
> Add device tree binding Documentation details for Qualcomm SDX75
> pinctrl driver.
>
> Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
> ---
> .../bindings/pinctrl/qcom,sdx75-tlmm.yaml | 168 +++++++++++++++++++++
> 1 file changed, 168 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml
>

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml:77:52: [warning] too few spaces after comma (commas)

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.example.dtb: pinctrl@f100000: uart-w-state: 'oneOf' conditional failed, one must be fixed:
'function' is a required property
Unevaluated properties are not allowed ('rx-pins', 'tx-pins' were unexpected)
'pins' is a required property
'qup_se1_l2_mira' is not one of ['gpio', 'eth0_mdc', 'eth0_mdio', 'eth1_mdc', 'eth1_mdio', 'qlink0_wmss_reset', 'qlink1_wmss_reset', 'rgmii_rxc', 'rgmii_rxd0', 'rgmii_rxd1', 'rgmii_rxd2', 'rgmii_rxd3', 'rgmii_rx_ctl', 'rgmii_txc', 'rgmii_txd0', 'rgmii_txd1', 'rgmii_txd2', 'rgmii_txd3', 'rgmii_tx_ctl', 'adsp_ext_vfr', 'atest_char_start', 'atest_char_status0', 'atest_char_status1', 'atest_char_status2', 'atest_char_status3', 'audio_ref_clk', 'bimc_dte_test0', 'bimc_dte_test1', 'char_exec_pending', 'char_exec_release', 'coex_uart2_rx', 'coex_uart2_tx', 'coex_uart_rx', 'coex_uart_tx', 'cri_trng_rosc', 'cri_trng_rosc0', 'cri_trng_rosc1', 'dbg_out_clk', 'ddr_bist_complete', 'ddr_bist_fail', 'ddr_bist_start', 'ddr_bist_stop', 'ddr_pxi0_test', 'ebi0_wrcdc_dq2', 'ebi0_wrcdc_dq3', 'ebi2_a_d', 'ebi2_lcd_cs', 'ebi2_lcd_reset', 'ebi2_lcd_te', 'emac0_mcg_pst0', 'emac0_mcg_pst1', 'emac0_mcg_pst2', 'emac0_mcg_pst3', 'emac0_ptp_aux', 'emac0_ptp_pps', 'emac1_mcg_pst0', 'emac1_mcg_pst1', 'emac1_mcg_ps
t2', 'emac1_mcg_pst3', 'emac1_ptp_aux0', 'emac1_ptp_aux1', 'emac1_ptp_aux2', 'emac1_ptp_aux3', 'emac1_ptp_pps0', 'emac1_ptp_pps1', 'emac1_ptp_pps2', 'emac1_ptp_pps3', 'emac_cdc_dtest0', 'emac_cdc_dtest1', 'emac_pps_in', 'ext_dbg_uart', 'gcc_125_clk', 'gcc_gp1_clk', 'gcc_gp2_clk', 'gcc_gp3_clk', 'gcc_plltest_bypassnl', 'gcc_plltest_resetn', 'i2s_mclk', 'jitter_bist_ref', 'ldo_en', 'ldo_update', 'm_voc_ext', 'mgpi_clk_req', 'native0', 'native1', 'native2', 'native3', 'native_char_start', 'native_tsens_osc', 'native_tsense_pwm1', 'nav_dr_sync', 'nav_gpio_0', 'nav_gpio_1', 'nav_gpio_2', 'nav_gpio_3', 'pa_indicator_1', 'pci_e_rst', 'pcie0_clkreq_n', 'pcie1_clkreq_n', 'pcie2_clkreq_n', 'pll_bist_sync', 'pll_clk_aux', 'pll_ref_clk', 'pri_mi2s_data0', 'pri_mi2s_data1', 'pri_mi2s_sck', 'pri_mi2s_ws', 'prng_rosc_test0', 'prng_rosc_test1', 'prng_rosc_test2', 'prng_rosc_test3', 'qdss_cti_trig0', 'qdss_cti_trig1', 'qdss_gpio_traceclk', 'qdss_gpio_tracectl', 'qdss_gpio_tracedata0', 'qdss_gpio_tra
cedata1', 'qdss_gpio_tracedata10', 'qdss_gpio_tracedata11', 'qdss_gpio_tracedata12', 'qdss_gpio_tracedata13', 'qdss_gpio_tracedata14', 'qdss_gpio_tracedata15', 'qdss_gpio_tracedata2', 'qdss_gpio_tracedata3', 'qdss_gpio_tracedata4', 'qdss_gpio_tracedata5', 'qdss_gpio_tracedata6', 'qdss_gpio_tracedata7', 'qdss_gpio_tracedata8', 'qdss_gpio_tracedata9', 'qlink0_b_en', 'qlink0_b_req', 'qlink0_l_en', 'qlink0_l_req', 'qlink1_l_en', 'qlink1_l_req', 'qup_se0_l0', 'qup_se0_l1', 'qup_se0_l2', 'qup_se0_l3', 'qup_se1_l2', 'qup_se1_l3', 'qup_se2_l0', 'qup_se2_l1', 'qup_se2_l2', 'qup_se2_l3', 'qup_se3_l0', 'qup_se3_l1', 'qup_se3_l2', 'qup_se3_l3', 'qup_se4_l2', 'qup_se4_l3', 'qup_se5_l0', 'qup_se5_l1', 'qup_se6_l0', 'qup_se6_l1', 'qup_se6_l2', 'qup_se6_l3', 'qup_se7_l0', 'qup_se7_l1', 'qup_se7_l2', 'qup_se7_l3', 'qup_se8_l2', 'qup_se8_l3', 'sdc1_tb_trig', 'sdc2_tb_trig', 'sec_mi2s_data0', 'sec_mi2s_data1', 'sec_mi2s_sck', 'sec_mi2s_ws', 'sgmii_phy_intr0', 'sgmii_phy_intr1', 'spmi_coex_clk', 'spmi_
coex_data', 'spmi_vgi_hwevent', 'tgu_ch0_trigout', 'tri_mi2s_data0', 'tri_mi2s_data1', 'tri_mi2s_sck', 'tri_mi2s_ws', 'uim1_clk', 'uim1_data', 'uim1_present', 'uim1_reset', 'uim2_clk', 'uim2_data', 'uim2_present', 'uim2_reset', 'usb2phy_ac_en', 'vsense_trigger_mirnat']
'qup_se1_l3_mira' is not one of ['gpio', 'eth0_mdc', 'eth0_mdio', 'eth1_mdc', 'eth1_mdio', 'qlink0_wmss_reset', 'qlink1_wmss_reset', 'rgmii_rxc', 'rgmii_rxd0', 'rgmii_rxd1', 'rgmii_rxd2', 'rgmii_rxd3', 'rgmii_rx_ctl', 'rgmii_txc', 'rgmii_txd0', 'rgmii_txd1', 'rgmii_txd2', 'rgmii_txd3', 'rgmii_tx_ctl', 'adsp_ext_vfr', 'atest_char_start', 'atest_char_status0', 'atest_char_status1', 'atest_char_status2', 'atest_char_status3', 'audio_ref_clk', 'bimc_dte_test0', 'bimc_dte_test1', 'char_exec_pending', 'char_exec_release', 'coex_uart2_rx', 'coex_uart2_tx', 'coex_uart_rx', 'coex_uart_tx', 'cri_trng_rosc', 'cri_trng_rosc0', 'cri_trng_rosc1', 'dbg_out_clk', 'ddr_bist_complete', 'ddr_bist_fail', 'ddr_bist_start', 'ddr_bist_stop', 'ddr_pxi0_test', 'ebi0_wrcdc_dq2', 'ebi0_wrcdc_dq3', 'ebi2_a_d', 'ebi2_lcd_cs', 'ebi2_lcd_reset', 'ebi2_lcd_te', 'emac0_mcg_pst0', 'emac0_mcg_pst1', 'emac0_mcg_pst2', 'emac0_mcg_pst3', 'emac0_ptp_aux', 'emac0_ptp_pps', 'emac1_mcg_pst0', 'emac1_mcg_pst1', 'emac1_mcg_ps
t2', 'emac1_mcg_pst3', 'emac1_ptp_aux0', 'emac1_ptp_aux1', 'emac1_ptp_aux2', 'emac1_ptp_aux3', 'emac1_ptp_pps0', 'emac1_ptp_pps1', 'emac1_ptp_pps2', 'emac1_ptp_pps3', 'emac_cdc_dtest0', 'emac_cdc_dtest1', 'emac_pps_in', 'ext_dbg_uart', 'gcc_125_clk', 'gcc_gp1_clk', 'gcc_gp2_clk', 'gcc_gp3_clk', 'gcc_plltest_bypassnl', 'gcc_plltest_resetn', 'i2s_mclk', 'jitter_bist_ref', 'ldo_en', 'ldo_update', 'm_voc_ext', 'mgpi_clk_req', 'native0', 'native1', 'native2', 'native3', 'native_char_start', 'native_tsens_osc', 'native_tsense_pwm1', 'nav_dr_sync', 'nav_gpio_0', 'nav_gpio_1', 'nav_gpio_2', 'nav_gpio_3', 'pa_indicator_1', 'pci_e_rst', 'pcie0_clkreq_n', 'pcie1_clkreq_n', 'pcie2_clkreq_n', 'pll_bist_sync', 'pll_clk_aux', 'pll_ref_clk', 'pri_mi2s_data0', 'pri_mi2s_data1', 'pri_mi2s_sck', 'pri_mi2s_ws', 'prng_rosc_test0', 'prng_rosc_test1', 'prng_rosc_test2', 'prng_rosc_test3', 'qdss_cti_trig0', 'qdss_cti_trig1', 'qdss_gpio_traceclk', 'qdss_gpio_tracectl', 'qdss_gpio_tracedata0', 'qdss_gpio_tra
cedata1', 'qdss_gpio_tracedata10', 'qdss_gpio_tracedata11', 'qdss_gpio_tracedata12', 'qdss_gpio_tracedata13', 'qdss_gpio_tracedata14', 'qdss_gpio_tracedata15', 'qdss_gpio_tracedata2', 'qdss_gpio_tracedata3', 'qdss_gpio_tracedata4', 'qdss_gpio_tracedata5', 'qdss_gpio_tracedata6', 'qdss_gpio_tracedata7', 'qdss_gpio_tracedata8', 'qdss_gpio_tracedata9', 'qlink0_b_en', 'qlink0_b_req', 'qlink0_l_en', 'qlink0_l_req', 'qlink1_l_en', 'qlink1_l_req', 'qup_se0_l0', 'qup_se0_l1', 'qup_se0_l2', 'qup_se0_l3', 'qup_se1_l2', 'qup_se1_l3', 'qup_se2_l0', 'qup_se2_l1', 'qup_se2_l2', 'qup_se2_l3', 'qup_se3_l0', 'qup_se3_l1', 'qup_se3_l2', 'qup_se3_l3', 'qup_se4_l2', 'qup_se4_l3', 'qup_se5_l0', 'qup_se5_l1', 'qup_se6_l0', 'qup_se6_l1', 'qup_se6_l2', 'qup_se6_l3', 'qup_se7_l0', 'qup_se7_l1', 'qup_se7_l2', 'qup_se7_l3', 'qup_se8_l2', 'qup_se8_l3', 'sdc1_tb_trig', 'sdc2_tb_trig', 'sec_mi2s_data0', 'sec_mi2s_data1', 'sec_mi2s_sck', 'sec_mi2s_ws', 'sgmii_phy_intr0', 'sgmii_phy_intr1', 'spmi_coex_clk', 'spmi_
coex_data', 'spmi_vgi_hwevent', 'tgu_ch0_trigout', 'tri_mi2s_data0', 'tri_mi2s_data1', 'tri_mi2s_sck', 'tri_mi2s_ws', 'uim1_clk', 'uim1_data', 'uim1_present', 'uim1_reset', 'uim2_clk', 'uim2_data', 'uim2_present', 'uim2_reset', 'usb2phy_ac_en', 'vsense_trigger_mirnat']
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/1682079770-27656-2-git-send-email-quic_rohiagar@xxxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.