[PATCH v3 0/3] Add X-Powers AXP15060 PMIC support

[Shengyu Qu]

This patch series adds support for the X-Powers AXP15060 PMIC, which is
a general purpose PMIC seen on different boards with different SOC.
This series were tested on Starfive Visionfive 2 board.

On this board, IRQ line from PMIC isn't connected so PEK function is
completely unable to use, so IRQ existence detection is added to patch 2
to avoid initialization failure.

Besides, its GPIO/LDO control logic is quite different from other chips
and is not easy to add support for it basing on existing axp20x GPIO
driver, so I didn't add support for it in this series. Maybe others
could do this.

---
Changes since v2:
 - Rebase to AXP313a series v10 [1] + newest (20230420) -next branch
 Patch 1:
  - Disables DC-DC frequency setting (Andre Przywara)
 Patch 2:
  - Add axp_regulator_only_cells rather than directly using axp806_cells
    for cases that IRQ line isn't connected.
 Patch 3:
  - Fix some whitespace (Andre Przywara)
  - Rename swout to sw to keep up with bindings (Andre Przywara)
  - Add check for setting DC-DC frequency (Andre Przywara)


Changes since v1:
 - Move cpusldo before drivevbus (Krzysztof Kozlowski)

[1] https://lore.kernel.org/linux-sunxi/20230401001850.4988-1-andre.przywara@xxxxxxx/

Shengyu Qu (3):
  dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant
  mfd: axp20x: Add support for AXP15060 PMIC
  regulator: axp20x: Add AXP15060 support

 .../bindings/mfd/x-powers,axp152.yaml         |   7 +-
 drivers/mfd/axp20x-i2c.c                      |   2 +
 drivers/mfd/axp20x.c                          | 107 ++++++++
 drivers/regulator/axp20x-regulator.c          | 232 +++++++++++++++++-
 include/linux/mfd/axp20x.h                    |  85 +++++++
 5 files changed, 422 insertions(+), 11 deletions(-)

-- 
2.40.0