Re: [PATCH v2 1/2] dt-bindings: pinctrl: qcom: Add SDX75 pinctrl devicetree compatible

[Rohit Agarwal]

On 4/21/2023 6:26 PM, Rob Herring wrote:
> On Fri, 21 Apr 2023 15:13:15 +0530, Rohit Agarwal wrote:
> > Add device tree binding Documentation details for Qualcomm SDX75
> > pinctrl driver.
> >
> > Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
> > ---
> >   .../bindings/pinctrl/qcom,sdx75-tlmm.yaml          | 177 +++++++++++++++++++++
> >   1 file changed, 177 insertions(+)
> >   create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
> ./Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml:76:52: [warning] too few spaces after comma (commas)
>
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.example.dtb: pinctrl@f100000: uart-w-state: 'oneOf' conditional failed, one must be fixed:
> 	'function' is a required property
> 	'pins' is a required property
> 	'rx-pins', 'tx-pins' do not match any of the regexes: 'pinctrl-[0-9]+'
> 	'qup_se1_l2_mira' is not one of ['gpio', 'eth0_mdc', 'eth0_mdio', 'eth1_mdc', 'eth1_mdio', 'qlink0_wmss_reset', 'qlink1_wmss_reset', 'rgmii_rxc', 'rgmii_rxd0', 'rgmii_rxd1', 'rgmii_rxd2', 'rgmii_rxd3', 'rgmii_rx_ctl', 'rgmii_txc', 'rgmii_txd0', 'rgmii_txd1', 'rgmii_txd2', 'rgmii_txd3', 'rgmii_tx_ctl', 'adsp_ext_vfr', 'atest_char_start', 'atest_char_status0', 'atest_char_status1', 'atest_char_status2', 'atest_char_status3', 'audio_ref_clk', 'bimc_dte_test0', 'bimc_dte_test1', 'char_exec_pending', 'char_exec_release', 'coex_uart2_rx', 'coex_uart2_tx', 'coex_uart_rx', 'coex_uart_tx', 'cri_trng_rosc', 'cri_trng_rosc0', 'cri_trng_rosc1', 'dbg_out_clk', 'ddr_bist_complete', 'ddr_bist_fail', 'ddr_bist_start', 'ddr_bist_stop', 'ddr_pxi0_test', 'ebi0_wrcdc_dq2', 'ebi0_wrcdc_dq3', 'ebi2_a_d', 'ebi2_lcd_cs', 'ebi2_lcd_reset', 'ebi2_lcd_te', 'emac0_mcg_pst0', 'emac0_mcg_pst1', 'emac0_mcg_pst2', 'emac0_mcg_pst3', 'emac0_ptp_aux', 'emac0_ptp_pps', 'emac1_mcg_pst0', 'emac1_mcg_pst1', 'emac1_mcg_pst2', 'emac1_mcg_pst3', 'emac1_ptp_aux0', 'emac1_ptp_aux1', 'emac1_ptp_aux2', 'emac1_ptp_aux3', 'emac1_ptp_pps0', 'emac1_ptp_pps1', 'emac1_ptp_pps2', 'emac1_ptp_pps3', 'emac_cdc_dtest0', 'emac_cdc_dtest1', 'emac_pps_in', 'ext_dbg_uart', 'gcc_125_clk', 'gcc_gp1_clk', 'gcc_gp2_clk', 'gcc_gp3_clk', 'gcc_plltest_bypassnl', 'gcc_plltest_resetn', 'i2s_mclk', 'jitter_bist_ref', 'ldo_en', 'ldo_update', 'm_voc_ext', 'mgpi_clk_req', 'native0', 'native1', 'native2', 'native3', 'native_char_start', 'native_tsens_osc', 'native_tsense_pwm1', 'nav_dr_sync', 'nav_gpio_0', 'nav_gpio_1', 'nav_gpio_2', 'nav_gpio_3', 'pa_indicator_1', 'pci_e_rst', 'pcie0_clkreq_n', 'pcie1_clkreq_n', 'pcie2_clkreq_n', 'pll_bist_sync', 'pll_clk_aux', 'pll_ref_clk', 'pri_mi2s_data0', 'pri_mi2s_data1', 'pri_mi2s_sck', 'pri_mi2s_ws', 'prng_rosc_test0', 'prng_rosc_test1', 'prng_rosc_test2', 'prng_rosc_test3', 'qdss_cti_trig0', 'qdss_cti_trig1', 'qdss_gpio_traceclk', 'qdss_gpio_tracectl', 'qdss_gpio_tracedata0', 'qdss_gpio_tracedata1', 'qdss_gpio_tracedata10', 'qdss_gpio_tracedata11', 'qdss_gpio_tracedata12', 'qdss_gpio_tracedata13', 'qdss_gpio_tracedata14', 'qdss_gpio_tracedata15', 'qdss_gpio_tracedata2', 'qdss_gpio_tracedata3', 'qdss_gpio_tracedata4', 'qdss_gpio_tracedata5', 'qdss_gpio_tracedata6', 'qdss_gpio_tracedata7', 'qdss_gpio_tracedata8', 'qdss_gpio_tracedata9', 'qlink0_b_en', 'qlink0_b_req', 'qlink0_l_en', 'qlink0_l_req', 'qlink1_l_en', 'qlink1_l_req', 'qup_se0_l0', 'qup_se0_l1', 'qup_se0_l2', 'qup_se0_l3', 'qup_se1_l2', 'qup_se1_l3', 'qup_se2_l0', 'qup_se2_l1', 'qup_se2_l2', 'qup_se2_l3', 'qup_se3_l0', 'qup_se3_l1', 'qup_se3_l2', 'qup_se3_l3', 'qup_se4_l2', 'qup_se4_l3', 'qup_se5_l0', 'qup_se5_l1', 'qup_se6_l0', 'qup_se6_l1', 'qup_se6_l2', 'qup_se6_l3', 'qup_se7_l0', 'qup_se7_l1', 'qup_se7_l2', 'qup_se7_l3', 'qup_se8_l2', 'qup_se8_l3', 'sdc1_tb_trig', 'sdc2_tb_trig', 'sec_mi2s_data0', 'sec_mi2s_data1', 'sec_mi2s_sck', 'sec_mi2s_ws', 'sgmii_phy_intr0', 'sgmii_phy_intr1', 'spmi_coex_clk', 'spmi_coex_data', 'spmi_vgi_hwevent', 'tgu_ch0_trigout', 'tri_mi2s_data0', 'tri_mi2s_data1', 'tri_mi2s_sck', 'tri_mi2s_ws', 'uim1_clk', 'uim1_data', 'uim1_present', 'uim1_reset', 'uim2_clk', 'uim2_data', 'uim2_present', 'uim2_reset', 'usb2phy_ac_en', 'vsense_trigger_mirnat']
> 	'qup_se1_l3_mira' is not one of ['gpio', 'eth0_mdc', 'eth0_mdio', 'eth1_mdc', 'eth1_mdio', 'qlink0_wmss_reset', 'qlink1_wmss_reset', 'rgmii_rxc', 'rgmii_rxd0', 'rgmii_rxd1', 'rgmii_rxd2', 'rgmii_rxd3', 'rgmii_rx_ctl', 'rgmii_txc', 'rgmii_txd0', 'rgmii_txd1', 'rgmii_txd2', 'rgmii_txd3', 'rgmii_tx_ctl', 'adsp_ext_vfr', 'atest_char_start', 'atest_char_status0', 'atest_char_status1', 'atest_char_status2', 'atest_char_status3', 'audio_ref_clk', 'bimc_dte_test0', 'bimc_dte_test1', 'char_exec_pending', 'char_exec_release', 'coex_uart2_rx', 'coex_uart2_tx', 'coex_uart_rx', 'coex_uart_tx', 'cri_trng_rosc', 'cri_trng_rosc0', 'cri_trng_rosc1', 'dbg_out_clk', 'ddr_bist_complete', 'ddr_bist_fail', 'ddr_bist_start', 'ddr_bist_stop', 'ddr_pxi0_test', 'ebi0_wrcdc_dq2', 'ebi0_wrcdc_dq3', 'ebi2_a_d', 'ebi2_lcd_cs', 'ebi2_lcd_reset', 'ebi2_lcd_te', 'emac0_mcg_pst0', 'emac0_mcg_pst1', 'emac0_mcg_pst2', 'emac0_mcg_pst3', 'emac0_ptp_aux', 'emac0_ptp_pps', 'emac1_mcg_pst0', 'emac1_mcg_pst1', 'emac1_mcg_pst2', 'emac1_mcg_pst3', 'emac1_ptp_aux0', 'emac1_ptp_aux1', 'emac1_ptp_aux2', 'emac1_ptp_aux3', 'emac1_ptp_pps0', 'emac1_ptp_pps1', 'emac1_ptp_pps2', 'emac1_ptp_pps3', 'emac_cdc_dtest0', 'emac_cdc_dtest1', 'emac_pps_in', 'ext_dbg_uart', 'gcc_125_clk', 'gcc_gp1_clk', 'gcc_gp2_clk', 'gcc_gp3_clk', 'gcc_plltest_bypassnl', 'gcc_plltest_resetn', 'i2s_mclk', 'jitter_bist_ref', 'ldo_en', 'ldo_update', 'm_voc_ext', 'mgpi_clk_req', 'native0', 'native1', 'native2', 'native3', 'native_char_start', 'native_tsens_osc', 'native_tsense_pwm1', 'nav_dr_sync', 'nav_gpio_0', 'nav_gpio_1', 'nav_gpio_2', 'nav_gpio_3', 'pa_indicator_1', 'pci_e_rst', 'pcie0_clkreq_n', 'pcie1_clkreq_n', 'pcie2_clkreq_n', 'pll_bist_sync', 'pll_clk_aux', 'pll_ref_clk', 'pri_mi2s_data0', 'pri_mi2s_data1', 'pri_mi2s_sck', 'pri_mi2s_ws', 'prng_rosc_test0', 'prng_rosc_test1', 'prng_rosc_test2', 'prng_rosc_test3', 'qdss_cti_trig0', 'qdss_cti_trig1', 'qdss_gpio_traceclk', 'qdss_gpio_tracectl', 'qdss_gpio_tracedata0', 'qdss_gpio_tracedata1', 'qdss_gpio_tracedata10', 'qdss_gpio_tracedata11', 'qdss_gpio_tracedata12', 'qdss_gpio_tracedata13', 'qdss_gpio_tracedata14', 'qdss_gpio_tracedata15', 'qdss_gpio_tracedata2', 'qdss_gpio_tracedata3', 'qdss_gpio_tracedata4', 'qdss_gpio_tracedata5', 'qdss_gpio_tracedata6', 'qdss_gpio_tracedata7', 'qdss_gpio_tracedata8', 'qdss_gpio_tracedata9', 'qlink0_b_en', 'qlink0_b_req', 'qlink0_l_en', 'qlink0_l_req', 'qlink1_l_en', 'qlink1_l_req', 'qup_se0_l0', 'qup_se0_l1', 'qup_se0_l2', 'qup_se0_l3', 'qup_se1_l2', 'qup_se1_l3', 'qup_se2_l0', 'qup_se2_l1', 'qup_se2_l2', 'qup_se2_l3', 'qup_se3_l0', 'qup_se3_l1', 'qup_se3_l2', 'qup_se3_l3', 'qup_se4_l2', 'qup_se4_l3', 'qup_se5_l0', 'qup_se5_l1', 'qup_se6_l0', 'qup_se6_l1', 'qup_se6_l2', 'qup_se6_l3', 'qup_se7_l0', 'qup_se7_l1', 'qup_se7_l2', 'qup_se7_l3', 'qup_se8_l2', 'qup_se8_l3', 'sdc1_tb_trig', 'sdc2_tb_trig', 'sec_mi2s_data0', 'sec_mi2s_data1', 'sec_mi2s_sck', 'sec_mi2s_ws', 'sgmii_phy_intr0', 'sgmii_phy_intr1', 'spmi_coex_clk', 'spmi_coex_data', 'spmi_vgi_hwevent', 'tgu_ch0_trigout', 'tri_mi2s_data0', 'tri_mi2s_data1', 'tri_mi2s_sck', 'tri_mi2s_ws', 'uim1_clk', 'uim1_data', 'uim1_present', 'uim1_reset', 'uim2_clk', 'uim2_data', 'uim2_present', 'uim2_reset', 'usb2phy_ac_en', 'vsense_trigger_mirnat']
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml
>
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/1682070196-980-2-git-send-email-quic_rohiagar@xxxxxxxxxxx
>
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
Make dt_binding_check not throwing this error even after updating the 
dtschema and yamllint is installed.
Will update this in patchset 4. Will wait for comments on driver change, 
If there are any will push the patchset 4
addressing those comments at once.

Thanks
Rohit.