Re: [PATCH v2 1/1] arm: dts: sunxi: Add ICnova A20 ADB4006 board support

From: Andre Przywara
Date: Thu Apr 20 2023 - 05:03:35 EST

On Wed, 19 Apr 2023 14:12:29 +0200
Ludwig Kormann <ludwig.kormann@xxxxxxxxxxxxx> wrote:

Hi Ludwig,

thanks for posting this!

> Add board support for ICnova A20 SomPi compute module on
> ICnova ADB4006 development board.
>
> Specification:
> SoM
> - Processor: Allwinner A20 Cortex-A7 Dual Core at 1GHz
> - 512MB DDR3 RAM
> - Fast Ethernet (Phy: Realtek RTL8201CP)
> ADB4006
> - I2C
> - 2x USB 2.0
> - 1x Fast Ethernet port
> - 1x SATA
> - 2x buttons (PWRON, Boot)
> - 2x LEDS
> - serial console
> - HDMI
> - µSD-Card slot
> - Audio Line-In / Line-Out
> - GPIO pinheaders
>
> https://wiki.in-circuit.de/index.php5?title=ICnova_ADB4006
> https://wiki.in-circuit.de/index.php5?title=ICnova_A20_SODIMM
>
> ---
>
> changes in v2:
> - use short licensing header
> - remove deprecated elements from led nodes
> - disable csi power supply
> - add missing pins in usbphy node
> - split dts into SoM dtsi and carrier board dts
>
> v1 of this patch was sent to the uboot mailing list [1].
>
> [1] https://lists.denx.de/pipermail/u-boot/2023-April/514605.html
>
> Signed-off-by: Ludwig Kormann <ludwig.kormann@xxxxxxxxxxxxx>

So apart from what Krzysztof already mentioned (separate binding patch and
stray line), this looks good to me, and passed dt-validate. Also you
addressed all the comments I had on the U-Boot post (thanks for that), so
with those nits above fixed:

Reviewed-by: Andre Przywara <andre.przywara@xxxxxxx>

Cheers,
Andre

> ---
> .../devicetree/bindings/arm/sunxi.yaml | 6 +
> arch/arm/boot/dts/Makefile | 1 +
> .../boot/dts/sun7i-a20-icnova-a20-adb4006.dts | 137 ++++++++++++++++++
> arch/arm/boot/dts/sun7i-a20-icnova-a20.dtsi | 63 ++++++++
> 4 files changed, 207 insertions(+)
> create mode 100644 arch/arm/boot/dts/sun7i-a20-icnova-a20-adb4006.dts
> create mode 100644 arch/arm/boot/dts/sun7i-a20-icnova-a20.dtsi
>
> diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
> index 013821f4a7b8..12f0c236f17b 100644
> --- a/Documentation/devicetree/bindings/arm/sunxi.yaml
> +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
> @@ -305,6 +305,12 @@ properties:
> - const: allwinner,i12-tvbox
> - const: allwinner,sun7i-a20
>
> + - description: ICNova A20 ADB4006
> + items:
> + - const: incircuit,icnova-a20-adb4006
> + - const: incircuit,icnova-a20
> + - const: allwinner,sun7i-a20
> +
> - description: ICNova A20 SWAC
> items:
> - const: incircuit,icnova-a20-swac
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 3cc32722c394..b6b408417261 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1321,6 +1321,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
> sun7i-a20-hummingbird.dtb \
> sun7i-a20-itead-ibox.dtb \
> sun7i-a20-i12-tvbox.dtb \
> + sun7i-a20-icnova-a20-adb4006.dtb \
> sun7i-a20-icnova-swac.dtb \
> sun7i-a20-lamobo-r1.dtb \
> sun7i-a20-linutronix-testbox-v2.dtb \
> diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-a20-adb4006.dts b/arch/arm/boot/dts/sun7i-a20-icnova-a20-adb4006.dts
> new file mode 100644
> index 000000000000..c1606c085e4e
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun7i-a20-icnova-a20-adb4006.dts
> @@ -0,0 +1,137 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +// Copyright (C) 2023 In-Circuit GmbH
> +
> +/dts-v1/;
> +
> +#include "sun7i-a20-icnova-a20.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> +
> +/ {
> + model = "In-Circuit ICnova A20 ADB4006";
> + compatible = "incircuit,icnova-a20-adb4006", "incircuit,icnova-a20",
> + "allwinner,sun7i-a20";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + hdmi-connector {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_con_in: endpoint {
> + remote-endpoint = <&hdmi_out_con>;
> + };
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + led-0 {
> + function = LED_FUNCTION_POWER;
> + color = <LED_COLOR_ID_YELLOW>;
> + gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
> + default-state = "on";
> + };
> +
> + led-1 {
> + function = LED_FUNCTION_HEARTBEAT;
> + color = <LED_COLOR_ID_RED>;
> + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +};
> +
> +&ahci {
> + target-supply = <&reg_ahci_5v>;
> + status = "okay";
> +};
> +
> +&codec {
> + status = "okay";
> +};
> +
> +&de {
> + status = "okay";
> +};
> +
> +&ehci0 {
> + status = "okay";
> +};
> +
> +&ehci1 {
> + status = "okay";
> +};
> +
> +&hdmi {
> + status = "okay";
> +};
> +
> +&hdmi_out {
> + hdmi_out_con: endpoint {
> + remote-endpoint = <&hdmi_con_in>;
> + };
> +};
> +
> +&mmc0 {
> + vmmc-supply = <&reg_vcc3v3>;
> + bus-width = <4>;
> + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
> + status = "okay";
> +};
> +
> +&ohci0 {
> + status = "okay";
> +};
> +
> +&ohci1 {
> + status = "okay";
> +};
> +
> +&otg_sram {
> + status = "okay";
> +};
> +
> +&reg_ahci_5v {
> + status = "okay";
> +};
> +
> +&ac_power_supply {
> + status = "okay";
> +};
> +
> +&reg_usb1_vbus {
> + status = "okay";
> +};
> +
> +&reg_usb2_vbus {
> + status = "okay";
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_pb_pins>;
> + status = "okay";
> +};
> +
> +&usb_otg {
> + dr_mode = "otg";
> + status = "okay";
> +};
> +
> +&usbphy {
> + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
> + usb1_vbus-supply = <&reg_usb1_vbus>;
> + usb2_vbus-supply = <&reg_usb2_vbus>;
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-a20.dtsi b/arch/arm/boot/dts/sun7i-a20-icnova-a20.dtsi
> new file mode 100644
> index 000000000000..f1142bda5cd7
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun7i-a20-icnova-a20.dtsi
> @@ -0,0 +1,63 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +// Copyright (C) 2023 In-Circuit GmbH
> +
> +#include "sun7i-a20.dtsi"
> +#include "sunxi-common-regulators.dtsi"
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +&cpu0 {
> + cpu-supply = <&reg_dcdc2>;
> +};
> +
> +&gmac {
> + pinctrl-names = "default";
> + pinctrl-0 = <&gmac_mii_pins>;
> + phy-handle = <&phy1>;
> + phy-mode = "mii";
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + axp209: pmic@34 {
> + reg = <0x34>;
> + interrupt-parent = <&nmi_intc>;
> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> + };
> +};
> +
> +&gmac_mdio {
> + phy1: ethernet-phy@1 {
> + reg = <1>;
> + };
> +};
> +
> +#include "axp209.dtsi"
> +
> +&reg_dcdc2 {
> + regulator-always-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-name = "vdd-cpu";
> +};
> +
> +&reg_dcdc3 {
> + regulator-always-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-name = "vdd-int-dll";
> +};
> +
> +&reg_ldo1 {
> + regulator-name = "vdd-rtc";
> +};
> +
> +&reg_ldo2 {
> + regulator-always-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-name = "avcc";
> +};
> +