Re: [net PATCH v3 10/10] octeontx2-pf: Disable packet I/O for graceful exit

[Simon Horman]

On Wed, Apr 19, 2023 at 11:50:18AM +0530, Sai Krishna wrote:
> From: Subbaraya Sundeep <sbhatta@xxxxxxxxxxx>
> 
> At the stage of enabling packet I/O in otx2_open, If mailbox
> timeout occurs then interface ends up in down state where as
> hardware packet I/O is enabled. Hence disable packet I/O also
> before bailing out.
> 
> Fixes: 1ea0166da050 ("octeontx2-pf: Fix the device state on error")
> Signed-off-by: Subbaraya Sundeep <sbhatta@xxxxxxxxxxx>
> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@xxxxxxxxxxx>
> Signed-off-by: Sai Krishna <saikrishnag@xxxxxxxxxxx>
> ---
>  drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 11 ++++++++++-
>  drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c |  2 +-
>  2 files changed, 11 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
> index 179433d0a54a..52a57d2493dc 100644
> --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
> +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
> @@ -1835,13 +1835,22 @@ int otx2_open(struct net_device *netdev)
>  		otx2_dmacflt_reinstall_flows(pf);
>  
>  	err = otx2_rxtx_enable(pf, true);
> -	if (err)
> +	/* If a mbox communication error happens at this point then interface
> +	 * will end up in a state such that it is in down state but hardware
> +	 * mcam entries are enabled to receive the packets. Hence disable the
> +	 * packet I/O.
> +	 */
> +	if (err == EIO)
> +		goto err_disable_rxtx;
> +	else if (err)
>  		goto err_tx_stop_queues;
>  
>  	otx2_do_set_rx_mode(pf);
>  
>  	return 0;
>  
> +err_disable_rxtx:
> +	otx2_rxtx_enable(pf, false);
>  err_tx_stop_queues:
>  	netif_tx_stop_all_queues(netdev);
>  	netif_carrier_off(netdev);
> diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
> index ab126f8706c7..53366dbfbf27 100644
> --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
> +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
> @@ -621,7 +621,7 @@ static int otx2vf_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>  
>  	err = otx2vf_realloc_msix_vectors(vf);
>  	if (err)
> -		goto err_mbox_destroy;
> +		goto err_detach_rsrc;

I think it would be worth expanding on this part of the change
in the commit message. Because it's not obvious to me.
And I do wonder if it is a separate fix.

r 
>  
>  	err = otx2_set_real_num_queues(netdev, qcount, qcount);
>  	if (err)
> -- 
> 2.25.1
>